Thermotolerant coliform loadings to coastal areas of Santa Catarina (Brazil) evidence the effect of growing urbanisation and insufficient provision of sewerage infrastructure

Thermotolerant coliform (TC) loadings were quantified for 49 catchments draining into the North and South Bays of Santa Catarina (SC, southeastern Brazil), an area known for its tourism and aquaculture. TC loadings were calculated based on flow measurements taken in 26 rivers. TC concentrations ere quantified based on surface water samples collected at 49 catchment outlets in 2012 and 2013. Median TC loads ranged from 3.7 × 10³ to 6.8 × 10⁸ MPN s^?1. TC loadings in the catchments increased in proportion to increases in resident human population, population density and percentage of urbanised area. Catchments with more than 60% of area covered by wastewater collection and treatment systems had higher TC loads per person than catchments with less than 25%. Based on the study catchments, these results indicate that current sewerage infrastructure is ineffective in reducing contamination of faecal origin to surface waters. These findings have important implications for the management of microbiological health hazards in bathing, recreational and shellfish aquaculture waters in the North and South Bays of Santa Catarina Island.     

The use of Odonata species for environmental assessment: a meta-analysis for the Neotropical region

Environmental Science and Pollution Research - The order Odonata has been regularly used as an indicator of the ecosystem’s condition. The objective of this review was to analyze the...     

Alternative methods for the pilot-scale production and characterization of chitosan nanoparticles

Environmental Science and Pollution Research - This work describes the production/characterization of low molar mass chitosan nanoparticles derived from waste shrimp shells (SSC), as well as from a...     

Soil contamination in Colombian playgrounds: effects of vehicles,construction, and traffic

The presence of potentially hazardous elements (PHEs) in playground soils is generally associated with anthropogenic sources such as vehicle traffic, industries, construction sites, and biomass burning. Studies indicate that PHEs are harmful to human health and may even be carcinogenic. Therefore, the aim of this study was to evaluate the physicochemical, morphological, and mineralogical properties of soil samples from three public playgrounds located in the cities of Bogota, Medellin, and Barranquilla. Besides, the possible impacts caused by the aerodynamics of particles in Colombian cities were verified. The morphology, composition, and structure of the nanoparticles (NPs) (< 100 nm) present in these soils were evaluated by field emission scanning electron microscopy (FE-SEM) equipped with high-precision field emission (FE) and high-resolution transmission electron microscopy (HR-TEM). Soil samples were predominantly feldspar, quartz, and, to a lesser extent, clay minerals, carbonates, and hematites. The average content of PHEs was anthropogenically enriched in relation to the upper continental crust. As and Sn showed a large spatial variation, indicating the influence of local sources, such as vehicle traffic and industries. There is an inverse relationship between the total concentrations of some elements and their leachable fractions. The accumulation of traffic-derived PHEs has a negative impact on human health and the environment, which is alarming, especially for elements such as Pb, Sb, or As. Therefore, the presence of PHEs should receive greater attention from public health professionals, and limits should be set and exposures controlled. This study includes the construction of a baseline that provides basic information on pollution, its sources, and exposure routes for humans in the vicinity of Colombia’s major cities, characterized by their increasing urbanization and industrialization.

     

Volcanic mercury in Pinus canariensis

Mercury (Hg) is a toxic element that is emitted to the atmosphere by both human activities and natural processes. Volcanic emissions are considered a natural source of mercury in the environment. In some cases, tree ring records taken close to volcanoes and their relation to volcanic activity over time are contradictory. In 1949, the Hoyo Negro volcano (La Palma-Canary Islands) produced significant pyroclastic flows that damaged the nearby stand of Pinus canariensis. Recently, 60 years after the eruption, we assessed mercury concentrations in the stem of a pine which survived volcano formation, located at a distance of 50 m from the crater. We show that Hg content in a wound caused by pyroclastic impacts (22.3 μg kg^?1) is an order of magnitude higher than the Hg concentrations measured in the xylem before and after the eruption (2.3 μg kg^?1). Thus, mercury emissions originating from the eruption remained only as a mark—in pyroclastic wounds—and can be considered a sporadic and very high mercury input that did not affect the overall Hg input in the xylem. In addition, mercury contents recorded in the phloem (9.5 μg kg^?1) and bark (6.0 μg kg^?1) suggest that mercury shifts towards non-living tissues of the pine, an aspect that can be related to detoxification in volcanism-adapted species.     

The cost of mitigation strategies for agricultural adaptation to global change

Land recovery and the improvement of lands affected by desertification for agricultural use, is achieved when a sustained recovery of agricultural productivity over time is obtained. In the areas affected by desertification and drought, it is common that the ecosystems do not have enough funding for water management and irrigation. This situation leads to an inadequate assessment of the environmental goods and services in arid zones. As a result we have a misuse of these dry lands. Many countries are implementing policies and making investments and efforts to mitigate arid land degradation and desertification through the National Action Programs (NAP). However, for the long term planning of mitigation and adaptation strategies, it is necessary to know the cost of recovery and land improvement in certain areas in order to forecast the budgets. This is the main objective of this paper in order to combat desertification and drought in central northern Chile. We have calculated a recovery cost per hectare by region and for each of the agriculture, livestock and forestry (ALF) promotion agencies. The results indicate that the cost of land reclamation in the northern regions is much higher than in the southern regions of this studied area. The cost is especially high for Region II, where investment per hectare is almost to 3000 US$ per hectare. At the other extreme is the Region VII, in the south of the studied area where the investment required per hectare barely reaches 500 US$. The contribution of the promotion agencies to the total cost also varied among regions and agencies. We discuss the results within a context of recovery cost per hectare depending on the different environmental characteristics and agricultural development of each of the studied regions.     

The recycling cycle of materials as a design project tool

Currently, a large number of companies consider recycling of materials as an opportunity to maximize profits and to reduce the environmental impact generated by these materials after they are disposed. However, there is also a strong constraint on the use of recycled materials mainly due to the lack of technical/scientific information, which would relate their physical properties to their recycling cycle. This information should be used in the initial phase of the product design to serve as reference for the simulation of a project to point out the physical properties obtained from recycling the Projected material (Pm). Thus, it would be possible to foresee some recycling strategy to keep the good characteristics of recycled materials by encouraging their use, regardless of the product to be designed.Therefore, the Recycling Cycle of Materials (RCM) is a tool that provides scientific/technical support in the selection of materials. It uses the information related to the physical properties of the Pm as a parameter for product design after five recycling cycles. For the case study, this tool has been applied to obtain the basic material of ABS/PC blend. Subsequently, this blend was evaluated using DSC, FTIR, traction and impact methods to obtain delimiting data for the definition of the mechanical properties resulting from the application of RCM.     

Recurrent disease outbreaks in corneous demosponges of the genus Ircinia: epidemic incidence and defense mechanisms

During 2008 and 2009, an epidemic affected sponges of the genus Ircinia in the Western Mediterranean. Investigations at a site on the European coast (6o43′08.80′′N; 3o43′52.20′′W) and another on the African coast (35o10′51.00′′N; 2o25′33.00′′W) revealed healthier African populations. The disease started with small pustules on the sponge surface, which subsequently coalesced forming larger, extensive lesions. An ultrastructural study suggested that a twisted rod is the etiological agent. It infected the sponges from the outside, initially killing the cells below the ectosome and then penetrating deeper into the body. The sponges responded to the bacterial progression by secreting concentric barriers of collagen and concentrating phagocytic cells at the diseased zones. This primitive immune system successfully resisted the disease in many instances, although mortality reached 27% in the studied populations. Epidemic outbreaks recur each year in September through November, arguably favored by abnormally high seawater temperatures in August.     

Territorial User Rights for Fisheries as Ancillary Instruments for Marine Coastal Conservation in Chile

Territorial user rights for fisheries have been advocated as a way to achieve sustainable resource management. However, few researchers have empirically assessed their potential as ancillary marine conservation instruments by comparing them to no‐take marine protected areas. In kelp (Lessonia trabeculata) forests of central Chile, we compared species richness, density, and biomass of macroinvertebrates and reef fishes among territorial‐user‐right areas with low‐level and high‐level enforcement, no‐take marine protected areas, and open‐access areas in 42 100‐m subtidal transects. We also assessed structural complexity of the kelp forest and substratum composition. Multivariate randomized permutation tests indicated macroinvertebrate and reef fish communities associated with the different access regimes differed significantly. Substratum composition and structural complexity of kelp forest did not differ among access regimes. Univariate analyses showed species richness, biomass, and density of macroinvertebrates and reef fishes were greater in highly enforced territorial‐user‐right areas and no‐take marine protected areas than in open‐access areas. Densities of macroinvertebrates and reef fishes of economic importance were not significantly different between highly enforced territorial‐user‐right and no‐take marine protected areas. Densities of economically important macroinvertebrates in areas with low‐level enforcement were significantly lower than those in areas with high‐level enforcement and no‐take marine protected areas but were significantly higher than in areas with open access. Territorial‐user‐right areas could be important ancillary conservation instruments if they are well enforced. Derechos de Usuario Territoriales para Pesquerías como Instrumentos Accesorios para la Conservación Marina Costera en Chile     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.