湘江干流水环境质量演变特征及其关键因素定量识别

为科学有效地保护湘江流域水环境,定量识别湘江干流主要水质指标的驱动因素,该研究基于1990~2016年水质监测数据及沿岸永州 长沙五市社会经济发展指标,采用Mann-Kendall检验法分析湘江干流水环境演变趋势,通过逐步回归分析确定各地区各水质指标主要驱动因素。结果表明：湘江干流COD_Mn、Cd、As整体呈下降趋势,上游BOD₅呈下降趋势,上中游NH₃-N呈上升趋势,中游衡阳、株洲市重金属Cr⁶⁺呈上升趋势,衡阳市TP呈上升趋势,中下游BOD₅呈上升趋势;定量追溯各水质指标影响因素得出工业污染是湘江干流重金属As、Cr⁶⁺、Cd主要驱动因素,永衡株潭地区NH₃-N,衡阳市BOD₅、COD_Mn、TP及衡株潭地区BOD₅均以农业污染影响为主;发现产业结构调整对干流水环境有显著影响,建议在流域产业结构调整过程中加强转型升级。     

一株蒽降解菌的分离鉴定及其降解特性研究

从石油污染土壤中筛选出一株蒽的高效降解菌株JUST-1,JUST-1可在以蒽为唯一碳源的培养基中生长,能利用蒽的最高浓度为70mg/L左右。经形态学观察并进行ITS序列分析,初步判断菌株JUST-1属于尖镰孢菌(Fusarium oxysporum)或该菌的一个株系。JUST-1的菌丝呈白色或粉红色,并存在三类孢子,分别为小型分生孢子(microconidia)、大型分生孢子(macroconidia)和厚垣孢子(chlamydospores),但大孢子分隔数较少,隔膜1～2个。JUST-1菌株为好氧菌。投菌量、初始蒽浓度、pH和H_2O_2浓度是影响蒽降解效率的因素。JUST-1菌株对蒽的最适宜降解条件为:蒽浓度40mg/L,投菌量10%～20%,pH7.0～8.0。在此条件下,摇床培养5d后,葸去除率可达70%以上。     

基于AHP和DEA模型的农业生态效率评价——以无锡市为例

农业面源污染已成为我国重要环境污染源之一,但由于农业面源污染具有分散、面广、周期长、随机性等特点,在评价上存在较大难度。根据生态效率理论,结合农业生产的特点,建立了综合考虑经济效益和环境影响的农业生态效率评价指标体系,并以江苏省无锡市为例,选取该市1998~2008年农业生产和面源污染相关数据,运用偏好锥的数据包络分析模型（DEA）对其农业生态效率进行了评价分析。结果显示：1998~2008年,无锡市农业生态效率呈现先下降后上升的趋势,近三年累计上升幅度达22%。表明近年来无锡市农业面源污染治理成效显著,农业可持续发展水平显著提高。提出的农业生态效率评价体系和方法为进一步推进农业面源污染治理工作提供了依据     

基于GIS和USLE的小流域土壤侵蚀定量评价

通过气象数据分析、实地调查、野外采样及室内分析、DEM计算、遥感解译等,建立了南水北调中线水源地丹江口水库区典型小流域地理数据库,确定了计算USLE因子指标的方法。在ArcGIS支持下,模拟了小流域土壤侵蚀强度的空间分布。将模拟结果分为微度、低度、中度、强度、剧烈侵蚀5级,建立土壤侵蚀与土地利用/土地覆盖类型及坡度之间的关系。结果表明：研究区年均土壤侵蚀量2414 t/hm2,远超该地区容许土壤流失量5 t/（hm2·a）。96%的侵蚀区及95%的土壤侵蚀总量位于<25°区域。就土地利用/土地覆盖类型而言,陡坡耕作区是主要的土壤流失区。研究结果为水源区的土壤侵蚀治理提供参考意见,同时为USLE在无土壤类型图地区的应用提供一种方法借鉴     

基于Landset TM/ETM 和HJ 1A/B影像的丹江口水库水域变化监测研究

位于湖北和河南两省交界的丹江口水库是南水北调中线工程的水源地,水库的水域变化监测与评估,对保障水库调水能力具有重要意义。收集了2002~2011年47幅Landsat TM/ETM和HJ 1A/B卫星遥感影像,采用基于阈值分割的归一化水体指数法（NDWI）提取了过去10 a的水库水域动态信息。结果表明：水库各月份平均水域面积从12月至次年3月,呈现下降趋势,而从3月到12月,呈现波动上升的趋势,最小水域面积出现在3月份,最大水域面积出现在12月份;由于受上游明显季节性降雨及水库运行管理的影响,丹江口水库丰水期（7月~次年1月）水域面积较枯水期（2月~6月）波动更为明显。而四季之中,春夏季节水库水域面积相对稳定,秋冬季节水域面积波动较大。针对枯水季节水库水量少的情况,管理部门应该加强监测力度,合理调蓄,保证水库的供水能力。从过去10 a整体来看,水库水域面积基本维持在300 km2以上,通过分析水库水域面积波动较小、影像积累最多的5月份遥感影像,发现水库水域面积呈现增长趋势,并且在枯水期、丰水期和过去10 a整体上都呈现了不同程度的增长趋势;此外,水库蓄水新增的水域面积主要集中在水库东、北部地区,应加强对这部分地区的生态恢复和环境监测     

Effect of alginate on the aggregation kinetics of copper oxide nanoparticles (CuO NPs): bridging interaction and hetero-aggregation induced by Ca<Superscript>2+</Superscript>

The stability of CuO nanoparticles (NPs) is expected to play a key role in the environmental risk assessment of nanotoxicity in aquatic systems. In this study, the effect of alginate (model polysaccharides) on the stability of CuO NPs in various environmentally relevant ionic strength conditions was investigated by using time-resolved dynamic light scattering. Significant aggregation of CuO NPs was observed in the presence of both monovalent and divalent cations. The critical coagulation concentrations (CCC) were 54.5 and 2.9 mM for NaNO₃ and Ca(NO₃)₂, respectively. The presence of alginate slowed nano-CuO aggregation rates over the entire NaNO₃ concentration range due to the combined electrostatic and steric effect. High concentrations of Ca²⁺ (>6 mM) resulted in stronger adsorption of alginate onto CuO NPs; however, enhanced aggregation of CuO NPs occurred simultaneously under the same conditions. Spectroscopic analysis revealed that the bridging interaction of alginate with Ca²⁺ might be an important mechanism for the enhanced aggregation. Furthermore, significant coagulation of the alginate molecules was observed in solutions of high Ca²⁺ concentrations, indicating a hetero-aggregation mechanism between the alginate-covered CuO NPs and the unabsorbed alginate. These results suggested a different aggregation mechanism of NPs might co-exist in aqueous systems enriched with natural organic matter, which should be taken into consideration in future studies.

Open image in new window

Graphical abstract Hetero-aggregation mechanism of CuO nanoparticles and alginate under high concentration of Ca²⁺

     

金融危机对中国发展碳金融的影响及对策分析

2007年以来,席卷全球的金融危机已经对世界各国的金融体系造成了或大或小的影响,这对于全球碳金融市场——这个刚刚起步并稍显呈现欣欣向荣之势的市场无疑是一个利空消息。本文总结了国际碳交易市场在金融危机来袭时的表现,着重分析了中国通过清洁发展机制参与国际碳金融市场并受金融危机影响的表现,探讨了在金融危机的大环境中,中国作为发展中国家如何在危机中寻求生存并发展。     

River channel network design for drought and flood control: A case study of Xiaoqinghe River basin, Jinan City, China

Vulnerability of river channels to urbanization has been lessened by the extensive construction of artificial water control improvements. The challenge, however, is that traditional engineering practices on isolated parts of a river may disturb the hydrologic continuity and interrupt the natural state of ecosystems. Taking the Xiaoqinghe River basin as a whole, we developed a river channel network design to mitigate river risks while sustaining the river in a state as natural as possible. The river channel risk from drought during low-flow periods and flood during high-flow periods as well as the potential for water diversion were articulated in detail. On the basis of the above investigation, a network with “nodes” and “edges” could be designed to relieve drought hazard and flood risk respectively. Subsequently, the shortest path algorithm in the graph theory was applied to optimize the low-flow network by searching for the shortest path. The effectiveness assessment was then performed for the low-flow and high-flow networks, respectively. For the former, the network connectedness was evaluated by calculating the “gamma index of connectivity” and “alpha index of circuitry”; for the latter, the ratio of flood-control capacity to projected flood level was devised and calculated. Results show that the design boosted network connectivity and circuitry during the low-flow periods, indicating a more fluent flow pathway, and reduced the flood risk during the high-flow periods.     

硫酸渣制备高纯度硫酸亚铁

以高铁硫酸渣为原料,采用酸浸一还原-除杂-结晶-重结晶-干燥工艺,合成高纯度硫酸亚铁.通过反应温度、反应时闻对硫酸渣中铁的浸出率的影响,以及结晶温度、干燥温度,干燥时间、于燥时间对硫酸亚铁产品纯度的影响做分析实验,得出最佳酸浸条件:硫酸渣与硫酸的固液比为1:3,硫酸质量分数为20%-25%,反应温度为80℃,反应时间为6 h,搅拌强度为200 r/min;最佳结晶精制条件:结晶溶液pH值1:3,温度为60℃,温度海60℃;除杂最佳条件:pH值约为4.5;冷却结晶温度控制在20℃,结晶秣过程为30℃于燥6 h.     

悬浮载体生物膜工艺挂膜试验研究

悬浮载体挂膜需经历微生物在载体表面可逆吸附-不可逆吸附-固着态生长的过程.试验研究发现,悬浮载体挂膜效果受载体性质、环境因素、接种污泥活性及悬浮微生物浓度等多种因素影响,而控制较低的悬浮态微生物浓度,保证固着态微生物的优势生长,是挂膜能否成功的关键.在适宜的温度和操作条件下,经历20 d左右时间可完成悬浮载体挂膜.