Gas/particle partitioning behaviour of azaarenes in an urban atmosphere

The gas/particle partitioning of azaarenes in the Liverpool urban atmosphere was measured from May 1995 to April 1996. This period included one of the hottest summers and coldest winters recorded in the UK. The changes of the relative proportions of particulate and vapour phases showed a strong seasonal variation in which over 80% of azaarene compounds are associated with the particles in the winter and over 60% of azaarene compounds exist as vapour phase during the summer. The results are fitted into a gas/particle partitioning equation. Calculated vapour pressures, vaporization and desorption enthalpies are also given. Azaarene partitioning behaviour is modelled at a variety of aerosol concentrations and over a temperature range which includes normal ambient temperatures. It is hypothesised that three ring azaarene species are more likely to undergo changes in the relative proportions of particle and vapour phase material than either two or four ring compounds.     

Particle size relationships at the Fresno Supersite

Aerosol size distributions are presented for a winter intensive study at the Fresno Supersite. The size distributions were consistent with and predictive for continuous PM2.5 measured by beta attenuation. They varied temporally with respect to source type and intensity, with the smallest mean diameters associated with high NOx concentrations during weekday morning rush hours. Conversely, small and large particle and black carbon (BC) concentrations were higher during Sunday and weekday evenings in response to traffic and residential wood combustion emissions. Ambient PM2.5 light scattering (Bsp) was precisely but systematically underestimated during winter, probably because of heating in the sample shelter.     

The associations of linear alkyl benzenes with the bulk properties of sediments from the River Mersey Estuary

The concentration distributions of linear alkyl benzenes (LAB) are reported as a function of sediment grain size and organic-carbon and lipid concentration for samples from three sites from the River Mersey Estuary, UK. There is not a simple relationship between contaminant concentration and grain size because the contaminant burden is much more strongly related to the organic-carbon and lipid content. This association between LAB, lipid, and organic carbon can be understood in terms of a simple model in which a proportion of LAB is introduced to the bulk material at source, with the remainder being adsorbed into particle surfaces after discharge. LAB concentrations in the Mersey Estuary are relatively high, and the compounds show evidence of degradation that arises from the high level of bacterial activity within the system.     

Theoretical study of liquid droplet dispersion in a venturi scrubber

The droplet concentration distribution in an atomizing scrubber was calculated based on droplet eddy diffusion by a three-dimensional dispersion model. This model is also capable of predicting the liquid flowing on the wall. The theoretical distribution of droplet concentration agrees well with experimental data given by Viswanathan et al. for droplet concentration distribution in a venturi-type scrubber. The results obtained by the model show a non-uniform distribution of drops over the cross section of the scrubber, as noted by the experimental data. While the maximum of droplet concentration distribution may depend on many operating parameters of the scrubber, the results of this study show that the highest uniformity of drop distribution will be reached when penetration length is approximately equal to one-fourth of the depth of the scrubber. The results of this study can be applied to evaluate the removal efficiency of a venturi scrubber.     

The effect of humic acids on the sequential extraction of metals in soils and sediments using ICP-AES and chemometric analysis

The effect of humic acids on the sequential extraction of metals from various soils and sediments has been studied. A new multi-element extraction method optimised via experimental design has been employed. The method uses centrifugation to pass the extractant solution, at varying pH, through the sediment sample. The sequential leaches were collected and analysed by ICP-AES. Chemometric data processing was utilised to identify the composition of the physico-chemical components in order to characterise the sample. A sediment sample collected from Carnon River (Cornwall, UK) and a reference material (NIST 2711 agricultural soil) were spiked with humic acids and the sequential extraction scheme was used to monitor the changes in metal distribution. The method has proved a quick and reliable way to evaluate different sediment samples, and has potential as a new tool for environmental geochemistry analysis.     

Colorimetric determination of formaldehyde in air using a hanging drop of chromotropic acid

A simple and sensitive method to determine parts per billion (ppb) of atmospheric formaldehyde in situ, using chromotropic acid, is described. A colorimetric sensor, coupled to a droplet of 15.5 microL chromotropic acid, was constructed and used to sample and quantify formaldehyde. The sensor was set up with two optical fibers, a light emitting diode (LED) and two photodiodes. The reference and transmitted light were measured by a photodetection arrangement that converts the signals into units of absorbance. Air was sampled around the chromotropic acid droplet. A purple product was formed and measured after the sampling terminated (typically 7 min). The response is proportional to the sampling period, analyte concentration and sample flow rate. The detection limit is approximately 2 ppb and can be improved by using longer sampling times and/or a sampling flow rate higher than that used in this work, 200 mL min-1. The present technique affords a simple, inexpensive near real-time measurement with very little reagent consumption. The method is selective and highly sensitive. This sensor could be used either for outdoor or indoor atmospheres.     

Bio-analytical and chemical characterisation of offshore produced water effluents for estrogen receptor (ER) agonists

The in vitro estrogen receptor (ER) agonist potency and C1 to C9 alkyl substituted phenol content of offshore produced water effluents collected from the UK sector of the North Sea were determined using a combination of bio-analytical and chemical analysis techniques. An in vitro reporter gene assay was used to determine ER agonist potency, whilst gas chromatography coupled to mass spectrometry (GC-MS) was used to quantify the concentration of alkylphenols. The in vitro ER agonist potency was highly variable and ranged from less than the limit of detection (theoretically 0.03 ng 17beta-estradiol (E2) l(-1)) to 91 ng E2 l(-1). C1 to C5 alkylphenol concentrations were also highly variable ranging from 5 to 1600 microg l(-1) with a median concentration of 206 microg l(-1). These data reflect the highly variable composition of produced water discharges from different fields. The observed poor correlation of the alkylphenol isomer content and ER agonist activity suggests that other compounds present in the produced water discharges may be responsible for the ER agonist activity observed. It is recommended that further work be performed to characterise the full range of ER agonists present in offshore produced water discharges.     

The effect of fly ash on plant growth and yield of tomato

A gradual increase in fly ash concentrations in the normal field soil (0, 10, 20...100% volume/volume) increased the porosity, water holding capacity, pH, conductivity, C.E.C., sulphate, carbonate, bicarbonate, chloride, P, K, Ca, Mg, Mn, Cu, Zn and B. Fly ash additions to soil caused significant reductions in nitrogen content, it being almost nil in 90 and 100%. Tomato plants grown in the ash-soil mixture showed luxuriant growth with bigger and greener leaves. Plant growth, yield, (flowering, fruiting, fruit weight/plant, mean fruit weight), carotenoids and chlorophylls were mostly enhanced in the treatments with 40-80% fly ash, being optimal at 50 or 60%. From 60 or 70% onwards, the measured parameters tended to reduce. At 100% fly ash, yield (weight of fruits/plant) was considerably reduced. The boron content of tomato leaves displayed a gradual increase with fly ash addition from 20% onwards, while response of foliar nitrogen was just the opposite. The most economic level of fly ash incorporation was 40%, which improved the yield and market value of tomato fruits (mean weight) by 81 and 30%, respectively.     

Sensitized photooxygenation of the fungicide furalaxyl

BACKGROUND: The photolysis of pesticides is of high current interest since light is one of the most important abiotic factors which are responsible for the environmental fate of these substances and may induce their conversion into noxious products. The action of light can also be mediated by oxygen and synthetic or naturally occurring substances which act as sensitizers. Our objective in this study was to investigate the photochemical behaviour of the systemic fungicide furalaxyl in the presence of oxygen and various sensitizers, and to compare the toxicity of the main photoproduct(s) to that of the parent compound. Previous reports on the direct photolysis of the pesticide demonstrated a very slow degradation and the only identified photoproducts were N-2,6-xylyl-D,L-alaninare and 2,6-dimethylaniline. METHODS: Solutions of furalaxyl in CH3CN were photooxygenate using a 500W high-pressure mercury lamp (through a Pyrex glass filter, lambda>300 nm) or a 650W halogen lamp or sunlight and the proper sensitizer. When sunlight was used, aqueous solutions were employed. The photodegradation was checked by NMR and/or GC-MS. The photoproducts were spectroscopically evidenced and, when possible, isolated chromatographically. Acute toxicity tests were performed on the rotifer Brachionus calyciflorus, the crustacean cladoceran Daphnia magna and the anostracan Thamnocephalus platyurus, while chronic toxicity tests (sublethal endpoints) comprised a producer, the alga Pseudokirchneriella subcapitata and the crustacean Ceriodaphnia dubia, as a consumer. RESULTS AND DISCUSSION: In the presence of both oxygen and sensitizer, furalaxyl underwent rapid photochemical transformations mainly to N-disubstituted formamide, maleic anhydride and a 2(5H)-furanone derivative. The formation of these products was rationalized in terms of a furan endoperoxide intermediate derived from the reaction of furalaxyl with active dioxygenated species (singlet oxygen, superoxide anion or ground state oxygen). The 2(5H)-furanone exhibited a higher toxicity than the parent compound. CONCLUSION: This work reports the first data on the photosensitized oxygenation of furalaxyl with evidence of the high tendency of the pesticide to undergo photodegradation under these conditions leading, among other things, to a 2(5H)-furanone, which is more toxic than the starting furalaxyl towards aquatic organisms. RECOMMENDATIONS AND OUTLOOK: Investigation highlights that the photolytic fate of a pesticide, although quite stable to direct photoreaction due to its low absorption of solar radiation at ground level, can be significantly influenced in the environment by the presence of substances with energy or electron-transfer properties as natural dyes, e.g. chlorophyll, or synthetic pollutants, e.g. polycyclic aromatic hydrocarbons (PAH).