Differences in responses of summer and winter spinach to elevated UV-B at varying soil NPK levels

Seasonal variations in response of spinach to elevated ultraviolet-B (UV-B) during summer and winter were assessed with respect to growth, biomass, yield, NPK uptake and NPK use efficiencies at varying NPK levels. The nutrient amendments were recommended NPK (RNPK) and 1.5 times recommended NPK (1.5 RNPK). Season significantly affected the measured parameters except the number of leaves. Under ambient UV-B, the growth performance of summer spinach was better in both the NPK levels, higher being at 1.5 RNPK leading to higher nutrient uptake. However, more reduction in biomass under elevated UV-B in 1.5 RNPK was recorded during summer, while during winter in RNPK. Reduction in biomass under elevated UV-B was accompanied by the modification in its partitioning with more biomass allocation to root during summer compared to winter at both the NPK levels. NPK uptake was higher in summer, while NPK use efficiencies were higher during winter. At higher than recommended NPK level, better NPK use efficiencies were displayed during both the seasons. Increased NPK supply during winter enabled spinach to capitalize light more efficiently and hence increased biomass accumulation. Strategies for surviving elevated UV-B in winter differ from those that provided protection from the same stress when it occurs in summer.     

Threat to food security under current levels of ground level ozone: A case study for Indian cultivars of rice

A higher ozone concentration in rural agricultural region poses threat to food production in developing countries. The present study was conducted to evaluate the growth, biomass accumulation and allocation pattern, quantitative and qualitative characteristics of grains for two tropical rice cultivars (Oryza sativa L. cv NDR 97 and Saurabh 950) at ambient O₃ concentrations at a rural site in the Indo Gangetic plains of India.Percent inhibition in number of leaves was higher for NDR 97, but in leaf area for Saurabh 950 grown in non filtered chambers (NFCs) compared to filtered chambers (FCs). Higher inhibition in root biomass was recorded in Saurabh 950 and in leaf and standing dead biomass for NDR 97. During vegetative phase, relative growth rate showed more percent inhibition in Saurabh 950, but at reproductive phase in NDR 97. Net assimilation rate showed higher values for Saurabh 950 than NDR 97 in NFCs but percent inhibition in leaf area ratio was higher for former than latter cultivar in NFCs. The ozone resistance was higher in NDR 97 during vegetative phase, but in Saurabh 950 at reproductive phase. Number of grains was higher in NDR 97 than Saurabh 950, but test weight and weight of grains m^?2 showed reverse trends. Concentrations of starch, protein, P, N, Ca, Mg and K decreased, while reducing and total soluble sugar increased in grains of both the cultivars in NFCs compared to FCs. The study concluded that under ambient condition of O₃ exposure, the two cultivars responded differently. Saurabh 950 favoured biomass translocation priority towards ear in reproductive phase and hence showed higher resistivity due to maintenance of higher test weight. NDR 97, however, showed better growth during vegetative period, but could not allocate efficiently to developing ears, hence higher number of unfilled grains in NFCs led lower test weight.     

Interlaboratory evaluation of an extraction and fluorescence method for the determination of trace beryllium in soils

Analytical methods for the determination of trace beryllium in soils are needed so that anthropogenic sources of this element can be distinguished from native (background) levels of beryllium. In this work, a collaborative interlaboratory evaluation of a new extraction and fluorescence-based procedure for determining beryllium in soil samples was carried out to fulfil method validation requirements for ASTM International voluntary consensus standard test methods. A Canadian reference material, CCRMP Till-1 soil, with a background beryllium concentration of 2.4 microg g(-1), was selected for study. This certified reference material (CRM) was spiked and homogenized with varying levels of beryllium oxide in order to give batches of material with beryllium concentrations of 4.36 +/- 0.69, 11.5 +/- 0.7, 124 +/- 7 and 246 +/- 16 microg g(-1) (+/- values are standard deviations). In the interlaboratory study (ILS), which was carried out in accordance with an applicable ASTM International standard practice (ASTM E691), samples of these spiked soils were subjected to extraction in dilute ammonium bifluoride at approximately 90 degrees C for 40 h. Fluorescence measurement of the extracted beryllium was carried out via detection using the high quantum yield fluorophore, hydroxybenzoquinoline sulfonate (HBQS). Interlaboratory precision estimates from six participating laboratories ranged from 0.048 to 0.103 (relative standard deviations) for the five different beryllium concentrations. Pooled bias estimates resulting from this ILS were between -0.049 and 0.177 for the various beryllium levels. These figures of merit support promulgation of the analytical procedure as an ASTM International standard test method.     

Potential benefits and risks of land application of sewage sludge

Sewage sludge, also referred as biosolids, is a byproduct of sewage treatment processes. Land application of sewage sludge is one of the important disposal alternatives. Characteristics of sewage sludge depend upon the quality of sewage and type of treatment processes followed. Being rich in organic and inorganic plant nutrients, sewage sludge may substitute for fertilizer, but availability of potential toxic metals often restricts its uses. Sludge amendment to the soil modifies its physico-chemical and biological properties. Crop yield in adequately sludge-amended soil is generally more than that of well-fertilized controls. Bioavailability of metals increases in sludge amended soil at excessive rates of application for many years. Plants differ in their abilities to absorb sludge-derived metals from the soil. The purpose of this paper is to review the available information on various aspects of sewage sludge application on soil fertility and consequent effects on plant production to explore the possibility of exploiting this byproduct for agronomy and horticulture.     

Heavy metal (Cu, Zn, Cd and Pb) contamination of vegetables in urban India: a case study in Varanasi

The contributions of heavy metals in selected vegetables through atmospheric deposition were quantified in an urban area of India. Deposition rate of Zn was recorded maximum followed by Cu, Cd and Pb. The concentrations of Zn and Cu were highest in Brassica oleracea, Cd in Abelmoschus esculentus and B. oleracea, while Pb was highest in Beta vulgaris. Heavy metal pollution index showed that B. oleracea was maximally contaminated with heavy metals followed by A. esculentus and then B. vulgaris. The results of washing showed that atmospheric deposition has contributed to the increased levels of heavy metals in vegetables. Both Cu and Cd posed health risk to local population via test vegetables consumption, whereas Pb posed the same only through B. oleracea. The study concludes that atmospheric depositions can elevate the levels of heavy metals in vegetables during marketing having potential health hazards to consumers.     

Distribution of detoxifying genes polymorphism in Maharastrian population of central India

The present study is aimed at evaluating the genotype frequency of detoxifying genes such as GSTM1, GSTT1 and NQO1 in Maharastrian population of central India. The study revealed about 64.6% of GSTM1-positive and 35.4% GSTM1-null population. GSTT1-positive genotype was found to be 87.5% and GSTT1-null showed 12.5%. The NQO1 genotype of Maharastrian population showed 52.3% of C/C, 42.48% C/T and 5.18% T/T. The NQO1 of this population does not deviate from the expected Hardy-Weinberg equilibrium. The genotype frequencies GSTM1 and GSTT1 of the population when compared with other ethnic groups of Asia and Caucasians show distinct nature of Maharastrian population from other Asian and Caucasian population.     

Analysis of Wind Farm Output: Estimation of Volatility Using High-Frequency Data

In the financial year 2011–2012, wind farms supplied 26 % of South Australia’s electricity demand according to the Australian Energy Market Operator’s report. This contribution has risen from zero in 2003. The operation of the electricity grid depends heavily on knowledge of the variability of supply. Wind farm output displays similar conditional volatility as financial market variables. In this paper, a new method of estimating wind farm output volatility on a 5-min time scale is developed through the use of higher-frequency wind farm output data. First, an autoregressive model for the high-frequency data is developed, and it is used to derive a volatility measure for 5-min data. The results are also true in certain general situations when the high-frequency data follow an autoregressive moving average process or exhibits long memory features. The methods described here are analogous to realised volatility measures used in financial series, except that wind farm output data are measured at uniform intervals, unlike random trading times for financial transactions.     

Assessment of the interactive effects of ambient O3 and NPK levels on two tropical mustard varieties (Brassica campestris L.) using open-top chambers

Rising O(3) concentrations in agricultural areas have been identified as a significant threat to crop production in Asia including India. The present work reports the results of a field study conducted to assess the usefulness of higher than recommended NPK dose in modifying the physiological, growth, yield, and seed quality responses of two mustard (Brassica campestris L. var. Vardan and Aashirwad) varieties under ambient ozone level at a rural site of India, using open-top chambers. Twelve hourly mean O(3) concentrations ranged between 27.7 and 59.04 ppb during the growth period. Plants in nonfiltered chambers (NFCs) showed reductions in photosynthetic rate, stomatal conductance, and growth parameters compared to the plants in filtered chambers (FCs), but reductions were of lower magnitude at 1.5 times recommended dose of NPK (1.5 RNPK) compared to recommended (RNPK). Yield and seed quality reduced significantly in plants of NFCs compared to FCs at RNPK, but no significant differences were recorded at 1.5 RNPK. There were higher N uptake and N uptake efficiency of plants in FCs compared to NFCs. Nitrogen utilization efficiency increased in Vardan, but decreased in Aashirwad in NFCs compared to FCs suggesting higher capability of N acquisition and utilization under ambient O(3), which led to a less pronounced reduction in the yield of the former than the latter variety. The differential nitrogen utilization efficiency in these varieties may be potentially used as measure of sensitivity characteristics in breeding programs for yield improvement in mustard under the present trend of increase in O(3) concentrations.     

Anaerobic digestion of fruit and vegetable waste: a critical review of associated challenges

Environmental Science and Pollution Research - The depletion of fossil fuels coupled with stringent environmental laws has encouraged us to develop sustainable renewable energy. Due to its numerous...     

Validation of a standardized portable fluorescence method for determining trace beryllium in workplace air and wipe samples

Beryllium is widely used in industry for its unique properties; however, occupational exposure to beryllium particles can cause potentially fatal disease. Consequently, exposure limits for beryllium particles in air and action levels on surfaces have been established to reduce exposure risks for workers. Field-portable monitoring methods for beryllium are desired in order to facilitate on-site measurement of beryllium in the workplace, so that immediate action can be taken to protect human health. In this work, a standardized, portable fluorescence method for the determination of trace beryllium in workplace samples, i.e., air filters and dust wipes, was validated through intra- and inter-laboratory testing. The procedure entails extraction of beryllium in 1% ammonium bifluoride (NH(4)HF(2), aqueous), followed by fluorescence measurement of the complex formed between beryllium ion and hydroxybenzoquinoline sulfonate (HBQS). The method detection limit was estimated to be less than 0.02 microg Be per air filter or wipe sample, with a dynamic range up to greater than 10 microg. The overall method accuracy was shown to satisfy the accuracy criterion (A< or = +/-25%) for analytical methods promulgated by the US National Institute for Occupational Safety and Health (NIOSH). Interferences from numerous metals tested (in >400-fold excess concentration compared to that of beryllium) were negligible or minimal. The procedure was shown to be effective for the dissolution and quantitative detection of beryllium extracted from refractory beryllium oxide particles. An American Society for Testing and Materials (ASTM) International voluntary consensus standard based on the methodology has recently been published.