Assessment of hydrogeochemical characteristics of groundwater in parts of Hindon–Yamuna interfluve region,Baghpat District,Western Uttar Pradesh

The present study has been carried out to assess groundwater quality in parts of Hindon–Yamuna interfluve region of western Uttar Pradesh. Fifty-five groundwater samples were collected from hand pumps in post-monsoon 2005 and pre-monsoon 2006 period, respectively, covering an area of about 1,345 km². Physical and chemical parameters of groundwater such as electrical conductivity, pH, total dissolved solid, Na, K, Ca, Mg, HCO₃, Cl, and SO₄ were determined. Concentration of the chemical constituents in groundwater of the study area varies spatially and temporarily. Interpretation of analytical data of major ion chemistry helps to identify three chemical types of groundwater i.e. ‘mixed’, ‘mixed bicarbonate’ and ‘alkali bicarbonate’ types. The species likely to occur in groundwater of the study area are Ca-HCO₃, Mg-HCO₃, Ca-SO₄, Na-Cl, Na-SO₄, Na-HCO₃, K-Cl, and some other possible species of K, depending on its abundance. The groundwater of the study area comes under the category of moderately hard to very hard, mildly acidic to slightly alkaline in nature. There is anomalously high concentration of major ions, particularly, Na, K, SO₄, and Cl. High SO₄ and K values may be related to anthropogenic influences, rather than through some natural process. Sodium along with Cl may be added to the system through sewage pollution and leachate percolation.     

Development of Ambient Cured Polyesteramide Coatings from Linseed Oil: a Sustainable Resource

The resourceful employment of vegetable oil based polymers in coating applications that yield novel properties, faces challenges usually in their processing. We have developed polyesteramide coatings from linseed (Linnum ussitatissium seeds) oil with improved coating properties. Linseed oil was first converted into N, N-bis 2-hydroxy ethyl linseed oil fatty amide diol (HELA). The resin was synthesized by the reaction of HELA with ethylenediaminetetraacetic acid (EDTA) to develop ethylenediamine polyesteramide (Ed-PEA). The latter was further treated with poly (styrene co-maleic anhydride) (SMA) in different (35–50) phr (part per hundred part of resin) to obtain ambient cured polyesteramide (AC-PEA). The structural elucidation of polymeric resin (AC-PEA) was carried out by FT-IR, ¹H-NMR, and ¹³C-NMR spectroscopic techniques. Thermal behavior of AC-PEA was studied by thermogravimetric analyses (TGA) and differential scanning calorimetry (DSC). The coatings of AC-PEA were prepared on mild steel strips to investigate their physico-mechanical and anticorrosive behavior (in acid, alkali, water and xylene). It was found that among all the samples, the one having 45 phr of SMA showed the best physico-mechanical and corrosion resistance performance. The thermal stability performance suggests that AC-PEA45 system could be safely used up to 150 °C.     

Arsenic uptake and phytotoxicity of T-aman rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) grown in the As-amended soil of Bangladesh

A pot-culture experiment was conducted in open-field conditions with highly cultivated locally transplanted (T) aman rice (Oryza sativa L.) named BR-22 in arsenic (As)-amended soil (0, 1.0, 5.0, 10.0, 20.0, 30.0, 40.0 and 50.0 mg kg⁻¹ As) of Bangladesh to see the effect of As on the growth, yield and metal uptake of rice. Arsenic was applied to soil in the form of sodium arsenate (Na₂HAsO₄). Arsenic affected the plant height, tiller and panicle numbers, grain and straw yield of T-aman rice significantly (P ≤ 0.05). The grain As uptake of T-aman rice was found to increase with increase of As in soil and a high grain As uptake was observed in the treatments of 30–50 mg kg⁻¹ As-containing soil. These levels exceed the food hygiene concentration limit of 1.0 mg kg⁻¹ As. However, the straw As uptake varied significantly (P ≤ 0.05) from a low concentration of As in soil (5 mg kg⁻¹) and the highest uptake was noticed in 20 mg kg⁻¹ As treatment.     

A multi-residue method for the analysis of organophosphorus residues in cooked and polished rice using accelerated solvent extraction and dispersive-solid phase extraction (D-SPE) technique and uncertainty measurement

Quick, simple and efficient multi-residue analytical methods were developed and validated for the determination of organophosphorous insecticides from polished and cooked rice. Polished rice was extracted using a simple, automated technique namely accelerated solvent extraction (ASE) using dichloromethane as the extraction solvent. Cooked rice was extracted with acetone and cleaned up using dispersive-solid phase extraction (D-SPE) technique. The single step extraction method adopted for polished rice using accelerated solvent extractor provided satisfactory recovery for eight organophosphorus pesticides (OPPs) which ranged from 85.5–116.7%; 90.0–110.3% and 93.5–118.8% at 1, 5 and 10 limit of quantification (LOQ) levels, respectively. The recovery of cooked rice was in the range of 74–124%; from 75–100% and from 73–87% for 1, 5 and 10 level of fortification, respectively. The total uncertainty was evaluated, taking four main independent sources viz., weighing, purity of the standard, GC calibration curve and repeatability under consideration. The expanded uncertainty was found to be in the range of 5–20%.     

Improvement of Physico-Mechanical Properties of Photo-Cured Chitosan Films with Ethylene Glycol Dimethacrylate and (2-Hydroxyethyl) Methacrylate

Chitosan, a natural polymer, was prepared by deacetylation of chitin which was obtained from dried prawn shell and was characterized. Thin chitosan film of chitosan was prepared by casting method from 0.2 % chitosan in 2 % acetic acid solution. Five formulations were developed with ethylene glycol dimethacrylate and (2-hydroxyethyl) methacrylate along with photo-initiator, Darocur-1664 (4 %). The chitosan film was soaked in the formulations at different soaking times and irradiated under UV-radiation at different intensities for the improvement of its physical and mechanical properties. The cured chitosan films were then subjected to various mechano-chemical tests like tensile strength, elongation at break, polymer loading, water absorption and gel content. The formulation containing 30 % ethylene glycol dimethacrylate and 66 % (2-hydroxyethyl) methacrylate showed the best performance at the 30th UV pass of UV-radiation for 3 min soaking time.     

Environmental concerns of desalinating seawater using reverse osmosis

This Critical Review on environmental concerns of desalination plants suggests that planning and monitoring stages are critical aspects of successful management and operation of plants. The site for the desalination plants should be selected carefully and should be away from residential areas particularly for forward planning for possible future expansions. The concerning issues identified are noise pollution, visual pollution, reduction in recreational fishing and swimming areas, emission of materials into the atmosphere, the brine discharge and types of disposal methods used are the main cause of pollution. The reverse osmosis (RO) method is the preferred option in modern times especially when fossil fuels are becoming expensive. The RO has other positives such as better efficiency (30-50%) when compared with distillation type plants (10-30%). However, the RO membranes are susceptible to fouling and scaling and as such they need to be cleaned with chemicals regularly that may be toxic to receiving waters. The input and output water in desalination plants have to be pre and post treated, respectively. This involves treating for pH, coagulants, Cl, Cu, organics, CO(2), H(2)S and hypoxia. The by-product of the plant is mainly brine with concentration at times twice that of seawater. This discharge also includes traces of various chemicals used in cleaning including any anticorrosion products used in the plant and has to be treated to acceptable levels of each chemical before discharge but acceptable levels vary depending on receiving waters and state regulations. The discharge of the brine is usually done by a long pipe far into the sea or at the coastline. Either way the high density of the discharge reaches the bottom layers of receiving waters and may affect marine life particularly at the bottom layers or boundaries. The longer term effects of such discharge concentrate has not been documented but it is possible that small traces of toxic substances used in the cleaning of RO membranes may be harmful to marine life and ecosystem. The plants require saline water and thus the construction of input and discharge output piping is vital. The piping are often lengthy and underground as it is in Tugun (QLD, Australia), passing below the ground. Leakage of the concentrate via cracks in rocks to aquifers is a concern and therefore appropriate monitoring quality is needed. Leakage monitoring devices ought to be attached to such piping during installation. The initial environment impact assessment should identify key parameters for monitoring during discharge processes and should recommend ongoing monitoring with devices attached to structures installed during construction of plants.     

Evaluation of non-enteric sources of non-methane volatile organic compound (NMVOC) emissions from dairies

Dairies are believed to be a major source of volatile organic compounds (VOC) in Central California, but few studies have characterized VOC emissions from these facilities. In this work, samples were collected from six sources of VOCs (Silage, Total Mixed Rations, Lagoons, Flushing Lanes, Open Lots and Bedding) at six dairies in Central California during 2006–2007 using emission isolation flux chambers and polished stainless steel canisters. Samples were analyzed by gas chromatography/mass spectrometry and gas chromatography/flame ionization detection. Forty-eight VOCs were identified and quantified in the samples, including alcohols, carbonyls, alkanes and aromatics. Silage and Total Mixed Rations are the dominant sources of VOCs tested, with ethanol as the major VOC present. Emissions from the remaining sources are two to three orders of magnitude smaller, with carbonyls and aromatics as the main components. The data suggest that animal feed rather than animal waste are the main source of non-enteric VOC emissions from dairies.     

Effects of environmental factors on the seasonally change of phytoplankton populations in a closed freshwater pond.

The effect of environmental factors affecting the population dynamic of phytoplankton population was studied seasonally in a closed freshwater pond with the natural water of Lake Kasumigaura, Japan. The predominant phytoplankton species in the pond were classified as Oscillatoria tenuis, Synedra ulna, Chlamydomonas cingulata and Cyclotella kutzingiana, with dominant species of Melosira italica, Synechococcus sp. and Cryptomonas ovata. The most important limiting factor for filament length and cell size of most of the phytoplankton community was temperature. Availability of most nutrients had profound effects on the phytoplankton growth as nonlimiting factors. Based on our results, it is suggested that cell cycle progression was also temporally regulated by a multiplicity of external factors such as temperature, nutrients, dissolved oxygen (DO) and pH. At high pH and high temperature, consistent increase of cell division of some phytoplanketers such as Synedra, Cyclotella, Chlamydomonas and Melosira occurs, and there also may be species-specific responses for other species of phytoplankters. In addition, the cell divisions of phytoplankters are differentially regulated in different phytoplankton species.     

A critical review of the emerging research on the detection and assessment of microplastics pollution in the coastal,marine, and urban Bangladesh

● Coastal and marine regions are the most studied for microplastic pollution. ● Tourism is a major cause of microplastic pollution in coastal regions. ● Sediments contain larger microplastics while fish ingest smaller microplastics. ● Inland lakes, rivers, and freshwater fish are impacted by microplastic pollution. ● Microplastics are found in edible salts, however, presence is less in refined salt. The research on the extent and effects of microplastics pollution in the Global South is only getting started. Bangladesh is a South Asian country with one of the fastest growing economies in the world, however, such exponential economic growth has also increased the pollution threats to its natural and urban environment. In this paper, we reviewed the recent primary research on the assessment of the extent of microplastics pollution in Bangladesh. From the online databases, we developed a compilation of emerging research articles that detected and quantified microplastics in different coastal, marine, and urban environments in Bangladesh. Most of the studies focused on the coastal environment (e.g., beach sediment) and marine fish, while limited data were available for the urban environment. We also discussed the relationship of the type of anthropogenic activities with the observed microplastic pollution. The Cox’s Bazar sea beach in south-east Bangladesh experienced microplastics pollution due to tourism activities, while fishing and other anthropogenic activities led to microplastics pollution in the Bay of Bengal. While microplastics larger than 1 mm were prevalent in the beach sediments, smaller microplastics with size below 0.5 mm were prevalent in marine fish samples. Moreover, the differences in microplastic abundance, size, shape, color, and polymer type found were depended on the sampling sites and relevant anthropogenic activities. It is imperative to identify major sources of microplastics pollution in both natural and urban environment, determine potential environmental and human health effects, and develop mitigating and prevention strategies for reducing microplastics pollution.     

Effects of using arsenic–iron sludge wastes in brick making

The arsenic–iron sludge generated in most of the treatment systems around the world is discharged into the nearest watercourse, which leads to accumulative rise of arsenic and iron concentrations in water. In this study, attempts were made to use the arsenic–iron sludge in making bricks and to analyze the corresponding effects on brick properties. The water treatment plant sludge is extremely close to brick clay in chemical composition. So, the sludge could be a potential substitute for brick clay. This study involved the addition of sludge with ratios 3%, 6%, 9% and 12% of the total weight of sludge–clay mixture. The physical and chemical properties of the produced bricks were then determined and evaluated and compared to control brick made entirely from clay. Results of different tests indicated that the sludge proportion and firing temperature were the two key factors in determining the quality of bricks. The compressive strength of 3%, 6%, 9% and 12% sludge containing brick samples were found to be 14.1 MPa, 15.1 MPa, 9.4 MPa and 7.1 MPa, respectively. These results indicate that the compressive strength of prepared bricks initially increased and then decreased with the increase of sludge proportion. Leaching characteristics of burnt bricks were determined with the variation of pH at a constant temperature. The optimum amount of sludge that could be mixed with clay to produce good bonding of clay–sludge bricks was found to be 6% (safely maximum) by weight.