Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

Geostatistical Evaluation of Spatial Variation Related to Groundwater Quality Database: Case Study for Arak Plain Aquifer,Iran

Geostatistical methods are one of the advanced techniques to interpolate groundwater quality data. Geostatistical interpolation techniques employ both the mathematical and the statistical properties of the measured points. Compiling the data distribution on spatial and temporal domain is of crucial importance in order to evaluate its quality and safety. The main purpose of this paper is to assess groundwater quality of Arak plain, Iran, by an unbiased interpolated method so called Kriging. Therefore, seven quality variables of Arak plain aquifer including TDS, SAR, EC, Na⁺, TH, Cl^?, and SO₄ ^2? have been analyzed, studied, and interpreted statistically and geostatistically. Utilized data in this study were collected from 97 water well samples in Arak plain, in 2012. After normalizing data, variogram as a geostatistical tool for defining spatial regression was calculated and experimental variograms have been plotted by GS⁺ software, then the best theoretical model was fitted to each variogram based on minimum RSS error. Cross validation was used to determine the accuracy of the estimated data. The uncertainty of the method could be well assessed via this method since the method not only gave the average error (around 0 in this study) but also gave the standard deviation of the estimations. Therefore, more than 3800 points were estimated by ordinary Kriging algorithm in places which have not been sampled. Finally, estimation maps of groundwater quality were prepared and map of estimation variance, EV, has been presented to assess the quality of estimation in each estimated point. Results showed that the Kriging method is more accurate than the traditional interpolation algorithms not honoring the spatial properties of the database.     

Assessment of indoor and outdoor particulate air pollution at an urban background site in Iran

The relationship between indoor and outdoor particulate air pollution was investigated at an urban background site on the Payambar Azam Campus of Mazandaran University of Medical Sciences in Sari, Northern Iran. The concentration of particulate matter sized with a diameter less than 1 μm (PM_1.0), 2.5 μm (PM_2.5), and 10 μm (PM₁₀) was evaluated at 5 outdoor and 12 indoor locations. Indoor sites included classrooms, corridors, and office sites in four university buildings. Outdoor PM concentrations were characterized at five locations around the university campus. Indoor and outdoor PM measurements (1-min resolution) were conducted in parallel during weekday mornings and afternoons. No difference found between indoor PM₁₀ (50.1 ± 32.1 μg/m³) and outdoor PM₁₀ concentrations (46.5 ± 26.0 μg/m³), indoor PM_2.5 (22.6 ± 17.4 μg/m³) and outdoor PM_2.5 concentration (22.2 ± 15.4 μg/m³), or indoor PM_1.0 (14.5 ± 13.4 μg/m³) and outdoor mean PM_1.0 concentrations (14.2 ± 12.3 μg/m³). Despite these similar concentrations, no correlations were found between outdoor and indoor PM levels. The present findings are not only of importance for the potential health effects of particulate air pollution on people who spend their daytime over a period of several hours in closed and confined spaces located at a university campus but also can inform regulatory about the improvement of indoor air quality, especially in developing countries.     

Adaptation of Iranian farmers to climate variability and change

Climate change poses serious challenges for populations whose livelihoods depend principally on natural resources. Given the increases in extreme weather events projected to adversely affect the arid and semi-arid regions of Iran, adaptation of the agricultural sector is imperative. Few studies have addressed the farmers’ adaptation in Iran, and little is known about ongoing adaptation strategies in use. Adopting principal component analysis/fuzzy logic-based method, this paper considers the agricultural adaptation to climate variability. A survey of 255 farmers of Fars Province, selected through a multistage stratified random sampling method, revealed different levels of adaptation, specifically the low, moderate and high, which are principally distinguished by various degrees of sensitivity and adaptive capacity. The study also identified the main adaptation strategies used by farmers in response to climate-related shocks. Results indicated that although a large percentage of farmers make some adjustments to their farming practices, there are significant differences in choice of adaptation strategies by the adaptation categories. Some conclusions and recommendations are offered to increase the adaptive capacity of farmers and reduce negative impacts of climate variability and change.     

Effective photodegradation of methomyl pesticide in concentrated solutions by novel enhancement of the photocatalytic activity of TiO2 using CdSO4 nanoparticles

Annihilation of electrons–holes recombination process is the main remedy to enhance the photocatalytic activity of the semiconductors photocatalysts. Doping of this class of photocatalysts by foreign nanoparticles is usually utilized to create high Schottky barrier that facilitates electron capture. In the literature, because nonpolar nanoparticles (usually pristine metals, e.g., Ag, Pt, Au, etc.) were utilized in the doping process, the corresponding improvement was relatively low. In this study, CdSO₄-doped TiO₂ nanoparticles are introduced as a powerful and reusable photocatalyst for the photocatalytic degradation of methomyl pesticide in concentrated aqueous solutions. The utilized CdSO₄ nanoparticles form polar grains in the TiO₂ matrix due to the electrons leaving characteristic of the sulfate anion. The introduced nanoparticles could successfully eliminate the harmful pesticide under the sunlight radiation within a very short time (less than 1 h), with a removal capacity reaching 1,000 mg pesticide per gram of the introduced photocatalyst. Moreover, increase in the initial concentration of the methomyl did not affect the photocatalytic performance; typically 300, 500, 1,000, and 2,000 mg/l solutions were completely treated within 30, 30, 40, and 60 min, respectively, using 100 mg catalyst. Interestingly, the photocatalytic efficiency was not affected upon multiple use of the photocatalyst. Moreover, negative activation energy was obtained which reveals super activity of the introduced photocatalyst. The distinct photocatalytic activity indicates the complete annihilation of the electrons–holes recombination process and abundant existence of electrons on the catalyst surfaces due to strong electrons capturing the operation of the utilized polar CdSO₄ nanoparticles. The introduced photocatalyst has been prepared using the sol–gel technique. Overall, the simplicity of the synthesizing procedure and the obtained featured photocatalytic activity strongly recommend the introduced nanoparticles to treat the methomyl-containing polluted water.     

Impact of an educational program on knowledge and practice of health care staff toward pharmaceutical waste management in Gaza,Palestine

In health care facilities, pharmaceutical waste is generally discharged down the drain or sent to landfill. Poor knowledge about their potential downstream impacts may be a primary factor for improper disposal behavior. The objective of this study was to determine the impact of an intervention program on knowledge and practice of health care staff regarding pharmaceutical waste management. The study was designed as a pre/posttest intervention study. Total sample size was 530 in the pre-intervention phase, and then a subsample of 69 individuals was selected for the intervention and the post-intervention phases. Paired-sample t test was used to assess the difference between pretest and follow-up test results. A statistically significant improvement in knowledge and practice was achieved (P < 0.001). Poor knowledge and poor practice levels (scores <50%) were found to improve to satisfactory levels (scores ≥75%). Therefore, educational programs could be considered as an effective tool for changing health care staff practice in pharmaceutical waste management.

Implications: In health care facilities, pharmaceutical waste is generally discharged down the drain or sent to landfill. A lack of knowledge about the potential impacts of this type of waste may be a leading factor in improper disposal behavior. Following an educational program, statistically significant improvement in knowledge and practice of health care staff as regards to pharmaceutical waste management (PWM) was achieved. It is thus recommended that authorities implement training-of-trainers (TOT) programs to educate health care staff on PWM and organize refreshment workshops regularly.     

Road Dust Resuspension in the Vicinity of Limestone Quarries in Jordan

Abstract

Many areas in Jordan suffer from elevated levels of coarse particulate matter (PM₁₀). One potentially significant source of the observed PM is the resuspension of road dust in the vicinity of limestone quarries. To obtain data to assess the impact from this source, PM₁₀ road dust resus-pension factors near Abusiiah, a town to the north east of Amman surrounded by many quarries and brick factories, were measured. Measurements included PM₁₀ mass, particle size distributions, wind speed, and wind direction.The results showed that PM₁₀ concentrations could be as high as 600 µg/m³, and most of the airborne PM is in the coarse fraction. Loading trucks play a major role in resus-pending road dust, with an observed PM₁₀ emission rate of >6000 mg/km.     

Indoor particulate matter in urban residences of Alexandria,Egypt

Indoor particulate matter samples were collected in 17 homes in an urban area in Alexandria during the summer season. During air measurement in all selected homes, parallel outdoor air samples were taken in the balconies of the domestic residences. It was found that the mean indoor PM_2.5 and PM₁₀ (particulate matter with an aerodynamic diameter ≤2.5 and ≤10 μm, respectively) concentrations were 53.5 ± 15.2 and 77.2 ± 15.1 µg/m³, respectively. The corresponding mean outdoor levels were 66.2 ± 16.5 and 123.8 ± 32.1 µg/m³, respectively. PM_2.5 concentrations accounted, on average, for 68.8 ± 12.8% of the total PM₁₀ concentrations indoors, whereas PM_2.5 contributed to 53.7 ± 4.9% of the total outdoor PM₁₀ concentrations. The median indoor/outdoor mass concentration (I/O) ratios were 0.81 (range: 0.43–1.45) and 0.65 (range: 0.4–1.07) for PM_2.5 and PM₁₀, respectively. Only four homes were found with I/O ratios above 1, indicating significant contribution from indoor sources. Poor correlation was seen between the indoor PM₁₀ and PM_2.5 levels and the corresponding outdoor concentrations. PM₁₀ levels were significantly correlated with PM_2.5 loadings indoors and outdoors and this might be related to PM₁₀ and PM_2.5 originating from similar particulate matter emission sources. Smoking, cooking using gas stoves, and cleaning were the major indoor sources contributed to elevated indoor levels of PM₁₀ and PM_2.5.

Implications: The current study presents results of the first PM_2.5 and PM₁₀ study in homes located in the city of Alexandria, Egypt. Scarce data are available on indoor air quality in Egypt. Poor correlation was seen between the indoor and outdoor particulate matter concentrations. Indoor sources such as smoking, cooking, and cleaning were found to be the major contributors to elevated indoor levels of PM₁₀ and PM_2.5.