Responses of three grass species to creosote during phytoremediation

Phytoremediation of creosote-contaminated soil was monitored in the presence of Tall fescue, Kentucky blue grass, or Wild rye. For all three grass species, plant growth promoting rhizobacteria (PGPR) were evaluated for plant growth promotion and protection of plants from contaminant toxicity. A number of parameters were monitored including plant tissue water content, root growth, plant chlorophyll content and the chlorophyll a/b ratio. The observed physiological data indicate that some plants mitigated the toxic effects of contaminants. In addition, in agreement with our previous experiments reported in the accompanying paper (Huang, X.-D., El-Alawi, Y., Penrose, D.M., Glick, B.R., Greenberg, B.M., 2004. A multi-process phytoremediation system for removal of polycyclic aromatic hydrocarbons from contaminated soil. Environ. Poll. doi: 10.1016/j.envpol.2003.09.031), PGPR were able to greatly enhance phytoremediation. PGPR accelerated plant growth, especially roots, in heavily contaminated soils, diminishing the toxic effects of contaminants to plants. Thus, the increased root biomass in PGPR-treated plants led to more effective remediation.     

Pollution prevention through process integration

 Process integration is a holistic approach to process design and operation. It emphasizes the unity of the process units and objectives. Therefore, it provides a unique framework for integrating environmental issues with other process objectives such as profitability, yield enhancement, debottlenecking and energy reduction. This paper presents a review of recent advances in the area of pollution prevention through process integration. First, the alternative methods for industrial waste reduction are discussed. Then, process integration is defined and categorized into three main components: synthesis, analysis and optimization. Next, mass integration science and methods are reviewed with special emphasis on their critical role in pollution prevention. Throughout the paper, various tools and techniques are described and illustrated. Received: 7 July 1998 / Accepted: 8 September 1998     

Protective effects of isoflavone on some biochemical parameters affected by cypermethrin in male rabbits

Effect of isoflavone on cypermethrin-induced changes in enzyme activities and free radicals was studied in plasma, liver, brain and testes of male New Zealand White rabbits. Rabbits were orally given sublethal dose of cypermethrin (24 mg/kg BW; 1/100 LD50), while isoflavone (2 mg/kg BW) was given alone or in combination with cypermethrin. The tested doses were given to rabbits every other day for 12 weeks. Results obtained showed that cypermethrin significantly (P < 0.05) induced free radicals in plasma, liver, brain and testes. The activities of glutathione S-transferase (GST) (liver, brain and testes), aspartate aminotransferase (AST) and alanine aminotransferase (ALT) (liver and testes), and alkaline phosphatase (AlP) (liver) were significantly (P < 0.05) decreased due to cypermethrin administration. Contrariwise, the activities of GST, AST, ALT and AIP were increased in plasma. The activity of acetylcholinesterase (AChE) did not change in plasma and brain of treated rabbits with cypermethrin. Isoflavone alone significantly (p < 0.05) decreased the levels of free radicals in plasma, liver, brain and testes, while did not produce any significant effect on the investigated enzymes. However, isoflavone is able to reverse the changes in enzyme activities due to the effect of cypermethrin. Results concluded that isoflavone confers marked protection against cypermethrin-induced oxidative stress in rabbit's plasma, liver, brain and testes.     

Vulnerability of tourism to climate change on the Mediterranean coastal area of El Hammam–EL Alamein,Egypt

Environment, Development and Sustainability - The north-western Mediterranean coast of Egypt, including the study area from El Hammam to EL Alamein, is a hub for economic and coastal tourism...     

Investigation of activated carbon/ethanol for low temperature adsorption cooling

Commercially available adsorption cooling systems use water/silica gel, water/zeolite and ammonia/ chloride salts working pairs. The water-based pairs are limited to work above 0°C due to the water high freezing temperature, while ammonia has the disadvantage of being toxic. Ethanol is a promising refrigerant due to its low freezing point (161 K), nontoxicity, zero ozone depletion, and low global warming potential. Activated carbon (AC) is a porous material with high degree of porosity (500–3000 m²/g) that has been used in wide range of applications. Using Dynamic Vapour Sorption (DVS) test facility, this work characterizes the ethanol adsorption of eleven commercially available activated carbon materials for cooling at low temperature of ?15°C. DVS adsorption results show that Maxsorb has the best performance in terms of ethanol uptake and adsorption kinetics compared to the other tested materials. The Maxsorb/ethanol adsorption process has been numerically modeled using computational fluid dynamics (CFD) and simulation results are validated using the DVS experimental measurements. The validated CFD simulation of the adsorption process is used to predict the effects of adsorbent layer thickness and packing density on cycle uptake for evaporating temperature of ?15°C. Simulation results show that as the thickness of the Maxsorb adsorbent layer increases, its uptake decreases. As for the packing density, the amount of ethanol adsorbed per plate increases with the packing density reaching maximum at 750 kg/m³. This work shows the potential of using Maxsorb/ethanol in producing low temperature cooling down to ?15°C with specific cooling energy reaching 400 kJ/kg.     

Assessment of heat-inactivated marine Aspergillus flavus as a novel biosorbent for removal of Cd(II), Hg(II), and Pb(II) from water

Environmental Science and Pollution Research - A novel marine fungus was isolated and classified as Aspergillus flavus strain EGY11. The heat-inactivated form of isolated Aspergillus flavus was...     

High-recycled-content hydraulic cements of alternative chemistry for concrete production

Sustainable hydraulic cements based on alkali aluminosilicate chemistry were developed with market-limited wastes acting as the primary aluminosilicate precursors. Two sets of formulations were developed with waste brick or impounded coal ash used at relatively large volume as aluminosilicate precursors. Supplementary materials were used to produce raw materials of viable chemistry. Blends of raw materials were transformed into hydraulic cements by input of mechanical energy without resorting to elevated temperatures. The resultant hydraulic cements exhibited viable strength development characteristics. FTIR, SEM, EDS and NMR analyses were conducted in order to gain insight into the structure of the hydraulic cements and their hydration products. The results pointed at the prevalence of calcium aluminosilicate hydrates among the products of hydration which thoroughly bound the non-hydrated cores of cement particles.     

Predictors of poor outcomes among patients of acute methanol intoxication with particular reference to Sequential Organ Failure Assessment (SOFA) score

Environmental Science and Pollution Research - Methanol intoxication is a global problem with serious morbidities and mortalities. Apart from the lifelong disabilities experienced by methanol...     

Assessment of Trace Metals in the Sediments From the Coastal Zone of Alexandria, Egypt

Freshly deposited surface sediments from the Alexandria coastal zone were collected and analysed in 1995 for their trace metal concentrations. Metal concentrations in the sediments vary between sites within a wide range for copper, zinc, iron, lead, chromium and cadmium. the statistical analysis between the metal concentrations and the different constituents (organic carbon, total nitrogen, silt, clay and total iron) showed significant correlations. the enrichment factors for the sediments ranged between 3 and 4-fold for copper, chromium and zinc and reached up to 9-fold for lead and 113-fold for cadmium. the highest index for cadmium and lead may be attributed to the anthropogenic inputs from the surrounding area, where they are highest in lower discharge areas.     

Report: The assessment of hospital waste management:a case study in Tehran

Hospital waste management is an important process that must be dealt with diligently. The management of hazardous waste material requires specific knowledge and regulations and it must be carried out by specialists in the field. In this cross-sectional study, we assessed the main stages of hospital waste management including separation, containment, removal and disposal of waste materials in public hospitals affiliated with Tehran University of Medical Sciences (TUMS). We selected 108 units of six hospitals (three general hospitals and three subspecialty hospitals) from those hospitals supervised by TUMS using the cluster sampling method. The measurement was conducted through a questionnaire and direct observation by researchers. Association analysis was done by statistical tests; Fisher exact test and chi-squared using SPSS software. According to the results obtained by the questionnaire, most of the studied wards scored moderately in terms of quality of their performance in all stages of waste management. About one-fifth of the wards were suffering from poor management of their medical waste and only a minority of wards obtained good scores for managing their waste materials. The findings also revealed significant associations between temporary waste storage and collection and the level of education of the managers (P = 0.040, P = 0.050, respectively). In summary, the study indicated a moderate management in all processes of separation, collection, containment, removal and disposal of waste materials in hospitals with several observed problems in the process.