Limnochemistry and nutrient dynamics in Upper Lake, Bhopal, India

In limnetic ecosystem, water quality depends upon physical, chemical, and biological factors. Effects of temperature, light scattering, and absorption by suspended and dissolved matter, transport, and mixing of nutrients within the lake are the significant factors as far as water quality is concerned. Nutrient loading into the lake and internal cycling of nutrients is always a matter of concern and critical to number of processes. During the winter season, heat and momentum transfer at the lake surface and the temperature-density relation of water destabilize the water column and drive vertical mixing and transport processes. The deepening of the surface layer produces nutrient transfer from the hypolimnion into the euphotic zone of epilimnion. It may also resuspend sediments that would have settled under stratified conditions, or redistribute particles that may still be in suspension. Thus, there exists a complex connection between the hydrodynamics and water quality issues. Present study is an effort to understand how seasonal changes in the limnetic ecosystem regulate the limnochemistry and movement of nutrient. The study revealed that significant variations of nutrients and organic load were observed between epilimnion and hypolimnion during summer season, and the lake was found in hyper-eutrophic condition throughout the study period.     

Monitoring the sedimentary carbon in an artificially disturbed deep-sea sedimentary environment

An area of 0.6 km(2) in the manganese nodule field of the Central Indian Basin was physically disturbed and sediments discharged in the near bottom waters to simulate seabed mining and study its impact on benthic ecosystem. An estimated 2 to 3 tonnes of sedimentary organic carbon (C(org)) was resuspended into the water column during a 9-day experiment. The majority of the sediment cores from within the disturbed area and areas towards the south showed a ~30% increase in C(org) content as well as an increase in carbon burial rates after disturbance, though with a reduction in carbon/phosphorus ratios. High specific surface area (SSA~25 m(2) g(-1)) and low C(org)/SSA ratios (mostly <0.5) are typical of deep-sea sediments. The increased C(org) values were probably due to the organic matter from dead biota and the migration and redeposition of fine-grained, organic-rich particles. Spatial distribution patterns of C(org) contents of cores taken before and after disturbance were used to infer the direction of plume migration and re-sedimentation. A positive relationship was observed between total and labile C(org) and macrobenthos density and total bacterial numbers prior to disturbance, whereas a negative relationship was seen after disturbance owing to drastic reduction in the density of macrofauna and bacteria. Overall decrease in labile organic matter, benthic biota and redistribution of organic matter suggest that the commercial mining of manganese nodules may have a significant immediate negative effect on the benthic ecosystem inducing changes in benthic community structure.     

The Accuracy of Mortality Reporting in Displaced Persons Camps During the Post-emergency Phase

For humanitarian organisations, accurate data are essential to identify emerging health problems and determine programme needs. We visited 45 post-emergency phase displaced persons camps and collected three months' mortality data which we compared with organisations' routine mortality reports. Organisations reported 612 deaths and we identified 741 deaths, for a mortality-reporting ratio, defined as the number of organisation-reported deaths divided by the number of investigator-identified deaths, of 83 per cent. For the majority of camps which under-reported deaths, mortality reporting ratios were significantly higher for women than men, and for camps with central mortality registers rather than those without. In the few camps which over-reported deaths, these occurred primarily among children younger than five years of age, probably due to the inclusion of abortions and stillbirths. Despite the overall under-reporting of deaths by humanitarian organisations, the existing health information systems appear to estimate mortality rates adequately in these post-emergency camps. However, organisations should improve the precision and completeness with which they report the characteristics of deaths in order to provide valuable data to target their programmes at the most vulnerable people.     

Changes in anoxic denitrification rate resulting from prefermentation of a septic, phosphorus-limited wastewater.

A preliminary bench-scale study of parallel University of Cape Town (UCT) biological nutrient removal systems showed improvement in anoxic denitrification rates resulting from prefermentation of a septic (i.e., high volatile fatty acid [VFA] content), phosphorus-limited (i.e., total chemical oxygen demand/total phosphorus [TP] ratio < 40:1) wastewater. Net phosphorus removals due to enhanced biological phosphorus removal (EBPR) were only improved marginally by prefermentation in spite of significant increases in anaerobic phosphorus release, polyhydroxyalkanoate formation, and higher anoxic and aerobic uptakes. This probably was due to the high VFA/TP ratio in the raw influent relative to the VFA requirements for EBPR because enough VFAs were already present for phosphorus removal prior to prefermentation. An additional assessment of prefermentation using parallel UCT systems with step feed of 50% of the influent to the anoxic zone was completed. This second phase quantified the effect of prefermentation in a step-feed scenario, which prioritized prefermentation use to enhance denitrification rather than EBPR. While specific denitrification rates in the anoxic zone were significantly improved by prefermentation, high denitrification in the clarifiers and aerobic zones (simultaneous denitrification) made definitive conclusions concerning the potential improvements in total system nitrogen removal questionable. The prefermented system always showed superior values of the zone settling velocity and sludge volume index and the improvement became increasingly statistically significant when the prefermenter was performing well.     

Aminolytic Depolymerization of Polyethylene Terephthalate Wastes Using Sn-Doped ZnO Nanoparticles

Journal of Polymers and the Environment - Poly(ethylene terephthalate) (PET) is one of the most consumed polymers because of its excellent thermal and mechanical properties. By increasing in PET...     

Concentration, sources and wet deposition of dissolved nitrogen and organic carbon in the Northern Indo-Gangetic Plain during monsoon

Precipitation represents an important phenomenon for carbon and nitrogen deposition. Here, the concentrations and fluxes of dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) with their potential sources were analyzed in wet precipitation during summer monsoon from the Northern Indo-Gangetic Plain (IGP), important but neglected area. The volume-weighted mean (VWM) concentration of DOC and TDN were 687.04 and 1210.23 µg/L, respectively. Similarly, the VWM concentration of major ions were in a sequence of NH₄⁺ > Ca²⁺ > SO₄^2- > Na⁺ > K⁺ > NO₃^? > Cl^? > Mg²⁺ > F^? > NO₂^?, suggesting NH₄⁺ and Ca²⁺ from agricultural activities and crustal dust played a vital role in precipitation chemistry. Moreover, the wet deposition flux of DOC and TDN were 9.95 and 17.06 kg/(ha?year), respectively. The wet deposition flux of inorganic nitrogen species such as NH₄⁺-N and NO₃^?-N were 14.31 and 0.47 kg/(ha?year), respectively, demonstrating the strong influence of emission sources and precipitation volume. Source attribution from different analysis suggested the influence of biomass burning on DOC and anthropogenic activities (agriculture, animal husbandry) on nitrogenous species. The air-mass back trajectory analysis indicated the influence of air masses originating from the Bay of Bengal, which possibly carried marine and anthropogenic pollutants along with the biomass burning emissions to the sampling site. This study bridges the data gap in the less studied part of the northern IGP region and provides new information for policy makers to deal with pollution control.     

Effect of safe concentrations of some pesticides on thyroid in the freshwater murrel, Channa punctatus: a histopathological study

The effect of 'safe application rate (SAR)' concentrations of the insecticides fenitrothion 50% EC (an organophosphate) and carbofuran 3% G (a carbamate) on histopathological changes in the thyroid gland have been studied during chronic exposure for 120 days (mid-April to mid-August). The studies reveal significant declines in the diameters of the follicle and the colloid of the thyroid, but a significant increase in the height of the epithelium, following exposure to both fenitrothion or carbofuran. In the fenitrothion treatment, invasion by blood corpuscles into the follicular lumen, following breakdown of the epithelium, was also observed. The degeneration of the epithelium and the loss of colloid in the follicles suggest that the fenitrothion treatment is more severe than the carbofuran treatment.     

Inoculation of plant growth promoting bacterium Achromobacter xylosoxidans strain Ax10 for the improvement of copper phytoextraction by Brassica juncea

In this study, a copper-resistant plant growth promoting bacterial (PGPB) strain Ax10 was isolated from a Cu mine soil to assess its plant growth promotion and copper uptake in Brassica juncea. The strain Ax10 tolerated concentrations up to 600 mg CuL(-1) on a Luria-Bertani (LB) agar medium and utilized 1-aminocyclopropane-1-carboxylic acid (ACC) as a sole N source in DF salts minimal medium. The strain Ax10 was characterized as Achromobacter xylosoxidans based on its 16S rDNA sequence homology (99%). The bacterium A. xylosoxidans Ax10 has also exhibited the capability of producing indole acetic acid (IAA) (6.4 microg mL(-1)), and solubilizing inorganic phosphate (89.6 microg mL(-1)) in specific culture media. In pot experiments, inoculation of A. xylosoxidans Ax10 significantly increased the root length, shoot length, fresh weight and dry weight of B. juncea plants compared to the control. This effect can be attributed to the utilization of ACC, production of IAA and solubilization of phosphate. Furthermore, A. xylosoxidans Ax10 inoculation significantly improved Cu uptake by B. juncea. Owing to its wide action spectrum, the Cu-resistant A. xylosoxidans Ax10 could serve as an effective metal sequestering and growth promoting bioinoculant for plants in Cu-stressed soil. The present study has provided a new insight into the phytoremediation of Cu-contaminated soil.     

A qualitative reliability and operability analysis of an integrated reforming combined cycle plant with CO2 capture

Most of the current CO₂ capture technologies are associated with large energy penalties that reduce their economic viability. Efficiency has therefore become the most important issue when designing and selecting power plants with CO₂ capture. Other aspects, like reliability and operability, have been given less importance, if any at all, in the literature.This article deals with qualitative reliability and operability analyses of an integrated reforming combined cycle concept. The plant reforms natural gas into a syngas, the carbon is separated out as CO₂ after a water-gas shift section, and the hydrogen-rich fuel is used for a gas turbine. The qualitative reliability analysis in the article consists of a functional analysis followed by a failure mode, effects, and criticality analysis (FMECA). The operability analysis introduces the comparative complexity indicator (CCI) concept.Functional analysis and FMECA are important steps in a system reliability analysis, as they can serve as a platform and basis for further analysis. Also, the results from the FMECA can be interesting for determining how the failures propagate through the system and their effects on the operation of the process. The CCI is a helpful tool in choosing the level of integration and to investigate whether or not to include a certain process feature. Incorporating the analytical approach presented in the article during the design stage of a plant can be advantageous for the overall plant performance.