Degradation of caffeine by conductive diamond electrochemical oxidation

The use of Conductive-Diamond Electrochemical Oxidation (CDEO) and Sonoelectrochemical Oxidation (CDSEO) has been evaluated for the removal of caffeine of wastewater. Effects of initial concentration, current density and supporting electrolyte on the process efficiency are assessed. Results show that caffeine is very efficiently removed with CDEO and that depletion of caffeine has two stages depending on its concentration. At low concentrations, opposite to what it is expected in a mass-transfer controlled process, the efficiency increases with current density very significantly, suggesting a very important role of mediated oxidation processes on the removal of caffeine. In addition, the removal of caffeine is faster than TOC, indicating the formation of reaction intermediates. The number and relative abundance of them depend on the operating conditions and supporting electrolyte used. In chloride media, removal of caffeine is faster and more efficiently, although the occurrence of more intermediates takes place. CDSEO does not increase the efficiency of caffeine removal, but it affects to the formation of intermediates. A detailed characterization of intermediates by liquid chromatography time-of-flight mass spectrometry seems to indicate that the degradation of caffeine by CDEO follows an oxidation pathway similar to mechanism proposed by other advanced oxidation processes.     

Health risk estimation due to carbon monoxide pollution at different spatial levels in Santiago, Chile

The Metropolitan Region of Santiago has been declared as nonattainment area for carbon monoxide (CO). The data was based on seven air monitoring stations that do not necessarily represent the real population exposure. Usually, a series of coefficients that relates the concentration of pollutants with health effects (betas of the concentration–response equations) are used. For the calculation of these betas, normally, a city average air pollution concentration is used; nevertheless, these betas do not necessarily represent the real risk of exposure that the inhabitants are experimented. For this reason, this study estimates two aspects that are unknown and that are necessary to policymakers in public health decisions. First, estimate the exposure at a lower spatial resolution level and, second, estimate a concentration–response curve that differs spatially and depends on the proportion of susceptible groups. We followed the Air Pollution and Health, European Approach/Spanish Multicenter Study on the Relationship Between Air Pollution and the Mortality methodology for the determination of the short-term health effect due to CO population exposure at the three spatial levels (city, zone, and county). We found that there are different risks in cardiorespiratory mortality in the group over 64 years old associated to an unequal exposure to CO in Santiago city. The higher risks are in counties located to the south–east of the city. These finding confirm the necessity to face, in a different way, the approach when evaluating control strategies and policy decision to control air pollution in Santiago.     

Evaluating macroinvertebrate biological metrics for ecological assessment of streams in northern Portugal

A procedure to select the most relevant metrics for assessing the ecological condition of the Douro basin (north Portugal) was developed based upon a set of 184 benthic community metrics. They were grouped into 16 biological categories selected from literature using data collected over 2 years from 54 sites along 31 rivers covering the whole perceived range of human disturbance. Multivariate analyses were carried out to identify the main trends in the macroinvertebrate data, to select reference versus impaired sites, to avoid multicolinearity between metrics, and to identify those that were clearly independent from natural stream typology. Structural metrics, adaptation metrics, and tolerance measures most effectively responded across a range of human influence. We find these attributes to be ecologically sound for monitoring Portugal’s lotic ecosystems and providing information relevant to the Water Framework Directive, which asserts that the definition of water quality depends on its “ecological status”, independent of the actual or potential uses of those waters.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at lambda = 254 nm. The photolysis of (alpha + beta: 2 + 1) endosulfan, alpha-endosulfan and beta-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 x 10(-4) s(-1); 1 x 10(-4) s(-1); and 2 x 10(-5) s(-1), respectively, and the calculated quantum yields (phi) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.     

Natural attenuation of diesel aliphatic hydrocarbons in contaminated agricultural soil

A diesel fuel spill at a concentration of 1 L m(-2) soil was simulated on a 12 m(2) plot of agricultural land, and natural attenuation of aliphatic hydrocarbons was monitored over a period of 400 days following the spill after which the aliphatic hydrocarbon concentrations were found to be below the legal contamination threshold for soil. The main fraction of these compounds (95%) remained at the surface layer (0-10 cm). Shortly after the spill (viz. between days 0 and 18), evaporation was the main origin of the dramatic decrease in pollutant concentrations in the soil. Thereafter, soil microorganisms used aliphatic hydrocarbons as sources of carbon and energy, as confirmed by the degradation ratios found. Soil quality indicators, soil microbial biomass and dehydrogenase activity, regained their original levels about 200 days after the spill.     

Evaluation of stream ecological integrity using litter decomposition and benthic invertebrates

Biomonitoring programs to access the ecological integrity of freshwaters tend to rely exclusively on structural parameters. Here we evaluated stream ecological integrity using (a) benthic macroinvertebrate derived metrics and a biotic index as measures of structural integrity and (b) oak litter decomposition and associated fungal sporulation rates as measures of functional integrity. The study was done at four sites (S1, S2, S3 and S4) along a downstream increasing phosphorus and habitat degradation gradient in a small stream. The biotic index, invertebrate metrics, invertebrate and fungal communities' structure and sporulation rates discriminated upstream and downstream sites. Decomposition rates classified sites S4 and S2 as having a compromised ecosystem functioning. Although both functional and structural approaches gave the same results for the most impacted site (S4), they were complementary for moderately impacted sites (S2 and S3), and we therefore support the need for incorporating functional measures in evaluations of stream ecological integrity.     

Sample preparation and biomass determination of SRF model mixture using cryogenic milling and the adapted balance method

The biogenic fraction of a simple solid recovered fuel (SRF) mixture (80 wt% printer paper/20 wt% high density polyethylene) is analyzed with the in-house developed adapted balance method (aBM). This fairly new approach is a combination of combustion elemental analysis (CHNS) and a data reconciliation algorithm based on successive linearisation for evaluation of the analysis results. This method shows a great potential as an alternative way to determine the biomass content in SRF. However, the employed analytical technique (CHNS elemental analysis) restricts the probed sample mass to low amounts in the range of a few hundred milligrams. This requires sample comminution to small grain sizes (<200 μm) to generate representative SRF specimen. This is not easily accomplished for certain material mixtures (e.g. SRF with rubber content) by conventional means of sample size reduction.This paper presents a proof of principle investigation of the sample preparation and analysis of an SRF model mixture with the use of cryogenic impact milling (final sample comminution) and the adapted balance method (determination of biomass content). The so derived sample preparation methodology (cutting mills and cryogenic impact milling) shows a better performance in accuracy and precision for the determination of the biomass content than one solely based on cutting mills. The results for the determination of the biogenic fraction are within 1–5% of the data obtained by the reference methods, selective dissolution method (SDM) and ¹⁴C-method (¹⁴C-M).     

Predicting species dominance shifts across elevation gradients in mountain forests in Greece under a warmer and drier climate

Regional Environmental Change - The Mediterranean Basin is expected to face warmer and drier conditions in the future, following projected increases in temperature and declines in precipitation....     

Results from a reference laboratory for prenatal diagnosis of sickle cell disorders in Cuba

A nationwide programme for the prevention of sickle cell (SS and SC) disorders was initiated in Cuba in 1983. Couples at risk were identified by screening pregnant women and the partners of those who carry an abnormal haemoglobin, followed by genetic counselling and the offer of prenatal diagnosis. Prenatal diagnosis was performed in one laboratory, which had carried out 1068 prenatal tests for Hb SS and SC disorders by the end of 1992. The centralization of the service has permitted rapid identification and resolution of problems.