Relationship between the loading rate of inorganic mercury to aquatic ecosystems and dissolved gaseous mercury production and evasion

The purpose of our study was to test the hypothesis that dissolved gaseous mercury (DGM) production and evasion is directly proportional to the loading rate of inorganic mercury [Hg(II)] to aquatic ecosystems. We simulated different rates of atmospheric mercury deposition in 10-m diameter mesocosms in a boreal lake by adding multiple additions of Hg(II) enriched with a stable mercury isotope (²⁰²Hg). We measured DGM concentrations in surface waters and estimated evasion rates using the thin-film gas exchange model and mass transfer coefficients derived from sulfur hexafluoride (SF₆) additions. The additions of Hg(II) stimulated DGM production, indicating that newly added Hg(II) was highly reactive. Concentrations of DGM derived from the experimental Hg(II) additions (“spike DGM”) were directly proportional to the rate of Hg(II) loading to the mesocosms. Spike DGM concentrations averaged 0.15, 0.48 and 0.94 ng l⁻¹ in mesocosms loaded at 7.1, 14.2, and 35.5 μg Hg m⁻² yr⁻¹, respectively. The evasion rates of spike DGM from these mesocosms averaged 4.2, 17.2, and 22.3 ng m⁻² h⁻¹, respectively. The percentage of Hg(II) added to the mesocosms that was lost to the atmosphere was substantial (33–59% over 8 weeks) and was unrelated to the rate of Hg(II) loading. We conclude that changes in atmospheric mercury deposition to aquatic ecosystems will not change the relative proportion of mercury recycled to the atmosphere.     

Spatio-temporal and species-specific variation in PBDE levels/patterns in British Columbia's coastal waters

Congener-specific levels of PBDEs were measured in the livers and some muscle tissues of Dungeness crab (Cancer magister), English sole (Pleuronectes vetulus) and spiny dogfish (Squalus acanthias). Highest concentrations (1,200-560 ng/g lipid) were found in crab collected near heavily urbanized areas (pop. approximately 0.3-1.8 million), followed by moderate levels at pulp/paper mills sites ( approximately 150 ng/g), and lowest levels occurred in areas that were somewhat removed from industrial/populated areas (< 24 ng/g). Temporal increases in total PBDEs and particularly in BDE-47 for Dungeness crab collected near pulp and paper and urbanized areas between 1994 and 2000 were observed. These correspond to Canadian and worldwide trends seen for PBDEs in biota. English sole and dogfish showed a pattern similar to that of the Columbia River whitefish samples, which corresponded closely to the patterns in the "penta" commercial mixture. Conversely, Dungeness crab were enriched in lower chlorinated PBDEs, particularly BDE-47 and BDE-49, compared to the fish and shark species from BC.     

Clamming up: environmental forces diminish the perceptive ability of bivalve prey

The lethal and nonlethal impacts of predators in marine systems are often mediated via reciprocal detection of waterborne chemical signals between consumers and prey. Local flow environments can enhance or impair the chemoreception ability of consumers, but the effect of hydrodynamics on detection of predation risk by prey has not been investigated. Using clams as our model organism, we investigated two specific questions: (1) Can clams decrease their mortality by responding to predators? (2) Do fluid forces affect the ability of clams to detect approaching predators? Previous research has documented a decrease in clam feeding (pumping) in response to a neighboring predator. We determined the benefits of this behavior to survivorship by placing clams in the field with knobbed whelk or blue crab predators caged nearby and compared mortality between these clams and clams near a cage-only control. Significantly more clams survived in areas containing a caged predator, suggesting that predator-induced alterations in feeding reduce clam mortality in the field. We ascertained the effect of fluid forces on clam perception of predators in a laboratory flume by comparing the feeding (pumping) behavior of clams in response to crabs and whelks in flows of 3 and 11 cm/s. Clams pumped significantly less in the presence of predators, but their reaction to blue crabs diminished in the higher velocity flow, while their response to whelks remained constant in both flows. Thus, clam reactive distance to blue crabs was affected by fluid forces, but hydrodynamic effects on clam perceptive distance was predator specific. After predators were removed, clams exposed to whelks took significantly longer to resume feeding than those exposed to blue crabs. Our results suggest that prey perception of predators can be altered by physical forces. Prey detection of predators is the underlying mechanism for trait-mediated indirect interactions (TMIIs), and recent research has documented the importance of TMIIs to community structure. Since physical forces can influence prey perception, the prevalence of TMIIs in communities may, in part, be related to the sensory ability of prey, physical forces in the environment that impact sensory performance, and the type of predator detected.     

Air quality modeling in the South Coast Air Basin of California: what do the numbers really mean?

This study evaluates air quality model sensitivity to input and to model components. Simulations are performed using the California Institute of Technology (CIT) airshed model. Results show the impacts on ozone (O3) concentration in the South Coast Air Basin (SCAB) of California because of changes in: (1) input data, including meteorological conditions (temperature, UV radiation, mixing height, and wind speed), boundary conditions, and initial conditions (ICs); and (2) model components, including advection solver and chemical mechanism. O3 concentrations are strongly affected by meteorological conditions and, in particular, by temperature. ICs also affect O3 concentrations, especially in the first 2 days of simulation. On the other hand, boundary conditions do not significantly affect the absolute peak O3 concentration, although they do affect concentrations near the inflow boundaries. Moreover, predicted O3 concentrations are impacted considerably by the chemical mechanism. In addition, dispersion of pollutants is affected by the advection routine used to calculate its transport. Comparison among CIT, California Photochemical Grid Model (CALGRID), and Urban Airshed Model air quality models suggests that differences in O3 predictions are mainly caused by the different chemical mechanisms used. Additionally, advection solvers contribute to the differences observed among model predictions. Uncertainty in predicted peak O3 concentration suggests that air quality evaluation should not be based solely on this single value but also on trends predicted by air quality models using a number of chemical mechanisms and with an advection solver that is mass conservative.     

Air emission inventories in North America: a critical assessment

Although emission inventories are the foundation of air quality management and have supported substantial improvements in North American air quality, they have a number of shortcomings that can potentially lead to ineffective air quality management strategies. Major reductions in the largest emissions sources have made accurate inventories of previously minor sources much more important to the understanding and improvement of local air quality. Changes in manufacturing processes, industry types, vehicle technologies, and metropolitan infrastructure are occurring at an increasingly rapid pace, emphasizing the importance of inventories that reflect current conditions. New technologies for measuring source emissions and ambient pollutant concentrations, both at the point of emissions and from remote platforms, are providing novel approaches to collecting data for inventory developers. Advances in information technologies are allowing data to be shared more quickly, more easily, and processed and compared in novel ways that can speed the development of emission inventories. Approaches to improving quantitative measures of inventory uncertainty allow air quality management decisions to take into account the uncertainties associated with emissions estimates, providing more accurate projections of how well alternative strategies may work. This paper discusses applications of these technologies and techniques to improve the accuracy, timeliness, and completeness of emission inventories across North America and outlines a series of eight recommendations aimed at inventory developers and air quality management decision-makers to improve emission inventories and enable them to support effective air quality management decisions for the foreseeable future.     

Towards a spatially explicit and quantitative vulnerability assessment of environmental change in Europe

Over the next century, society will increasingly be confronted with the impacts of global change (e.g. pollution, land use changes, and climate change). Multiple scenarios provide us with a range of possible changes in socio-economic trends, land uses and climate (i.e. exposure) and allow us to assess the response of ecosystems and changes in the services they provide (i.e. potential impacts). Since vulnerability to global change is less when society is able to adapt, it is important to provide decision makers with tools that will allow them to assess and compare the vulnerability of different sectors and regions to global change, taking into account exposure and sensitivity, as well as adaptive capacity. This paper presents a method that allows quantitative spatial analyses of the vulnerability of the human-environment system on a European scale. It is a first step towards providing stakeholders and policy makers with a spatially explicit portfolio of comparable projections of ecosystem services, providing a basis for discussion on the sustainable management of Europe’s natural resources.

Availability organisational analysis: Is it a hazard for safety?

This main issue of this article analyses the possible way to use for availability improvement, the organisational analysis methodology initially developed for accident safety investigations. As the last decade examples in the industrial world prove that some organisational weaknesses could either impact safety or availability, we have for purpose to make some important clarifications, with the help of the organisational paradigm, and grounded on our knowledge of safety accidents or local inquiries in hazardous technical complex systems.We will first give our definition of an availability event, by comparison with a safety event and recall what is for us an organisational analysis. Then we will consider the safety organisational paradigm pathogenic factors in wondering if these factors could also be seen as pathogenic factors for availability; or if specific availability pathogenic factors can be inferred from these safety pathogenic factors.In the end we will try to assess the common points and the differences between an availability oriented organisational analysis and a safety oriented one, with a particular attention to possible negative follows-up on safety issues and to the methodology issue.     

Behavior of bromide in the photoelectrocatalytic process and bromine generation using nanoporous titanium dioxide thin-film electrodes

In this study, the photoelectrocatalytic behavior of bromide and generation of bromine using TiO2 was investigated in the separate anode and cathode reaction chambers. Our results show that the generation of bromine begins around a flatband potential of -0.34 V vs. standard calomel electrode (SCE) at pH 3.0 under UV illumination and increases with an increase in positive potential, finally reaching a steady-state concentration at 1.0 V vs. SCE. Maximum bromine formation occurs over the range of pH 4-6, decreasing sharply at conditions where the pH>7.     

TURBULENCE IN MIRAMICHI BAY: THE BURNT CHURCH CONFLICT OVER NATIVE FISHING RIGHTS1

Abstract: A systematic technique is proposed for assisting in the design and implementation of policy and addressing the need to minimize or resolve disputes that may arise in the enforcement of regulations. The Graph Model for Conflict Resolution is a methodology that facilitates the modeling and analysis of interactive multiple participant-multiple objective decision problems. In the problems considered here, decision makers and policy planners engaged in capacity building typically have different viewpoints over appropriate ways of developing options and enforcing policy choices. Incompatible understandings of resource potentials and limits, and disparities in utilization of these resources, exasperate stakeholders and make the capacity building process counterproductive and even conducive to conflict. A systematic conflict resolution technique is invaluable to policy makers and practitioners in defusing confrontations and reaching out for consensus among participants. In support of current approaches to policy planning and regulation, the Graph Model provides accurate predictions and strategic insights into shortand long-term opportunities in multiple participant-multiple objective decision situations. A conflict among the government of Canada, the Mi'kmaq First Nation, and commercial fishermen over the sharing of a natural resource in New Brunswick, Canada, is used to illustrate the advantages of this technique in practical problems.     

Sources and evolution of anthropogenic lead in dated sediments from Lake Clair, Québec, Canada

Two sediments cores were collected from the deepest part of Lake Clair (Québec, Canada) to assess the historical sources of Pb additions to the lake. The cores were collected by divers by carefully inserting a Plexiglas tube into the sediments. To determine the stratigraphic ages of the sediments, (210)Pb and (137)Cs activities were counted by gamma-ray spectroscopy. Lead concentrations and isotopic ratios were performed by inductively coupled plasma-mass spectrometry (ICP-MS), following digestion of the samples with a mixture of HF, HNO(3), and HClO(4) acids and Pb separation by anion-exchange chromatography. Starting at the middle of the 19th century, Pb content of the sediments increased until 1975. The maximum Pb enrichment factor of 35 times (relative to the natural background) was found in sediments deposited in 1975. At this time, excess Pb flux was estimated to be about 0.03 g m(-2) yr(-1). Before 1872, the Pb isotopic ratios were relatively stable (mean (206)Pb/(207)Pb = 1.20 +/- 0.01), reflecting the natural Pb background. Between 1872 and 1894, the source of anthropogenic Pb was highly radiogenic as shown by the Pb isotopic signatures of the sediments (mean (206)Pb/(207)Pb = 1.22 +/- 0.01), possibly reflecting deforestation and agricultural developments in the St.-Lawrence Valley. Between 1894 and 1937, widespread use of industrial and domestic charcoals may explain the isotopic composition of Pb accumulated in the sediments (mean (206)Pb/(207)Pb = 1.19 +/- 0.01). From 1937 to 1975, Pb isotopic compositions became less radiogenic ((206)Pb/(207)Pb from 1.18 to 1.17) even though elemental Pb abundance reached extremely high values (623 mg kg(-1)). This isotopic shift reflects increased use of alkyl-lead in gasoline. For sediments accumulated between 1967 and 1996, the U.S. contribution to anthropogenic Pb accumulated in Lake Clair sediments amounted to between 30 and 63%.