Mercury speciation in the Persian Gulf sediments

The concentrations of total mercury (Hg) and methyl mercury (MMHg) were determined in 78 marine sediments in the Iranian coastal waters of the Persian Gulf along nine transects perpendicular to the coastline. Total Hg ranged from 10 to 56 ng g( - 1)d.w. and MMHg from 0.1 to 0.4 ng g( - 1) d.w. The fraction of methyl mercury accounted from 0.3% to 1.1% of the total mercury amount. The organic carbon (OC) content ranged from 0.4% to 1.8%. The present study indicates that the levels of Hg in the sediments of the Iranian coast of the Persian Gulf were all in the concentration range of unpolluted areas regarding Hg (<100 ng g( - 1)). The concentrations of total Hg, methyl mercury and organic carbon were generally higher in the deeper stations. Total Hg and MMHg were significantly correlated, but no significant correlations could be found between the Hg and OC levels.     

Propanil in a Manitoba soil: an interactive spreadsheet model based on conventional chemical kinetics

An interactive spreadsheet model has been created for quantitative predictions of propanil sorption and reaction in a slurried Manitoba clay soil. Based on experimental values for the numbers of empty and filled sorption sites as reactants and products, the reaction mechanism has been described with conventional chemical kinetics. The on line HPLC μ extraction method revealed labile sorption, intraparticle diffusion, and a chemical reaction. Laidler's integral rate law for second order kinetics describes the labile sorption. Desorption, intraparticle diffusion, and the chemical reaction are all described by first order kinetics. The time dependent effects of initial concentration and amount of slurried soil can be predicted for sorption, intraparticle diffusion, and the amount of reaction product. Suggested applications include storm runoff and inputs for fate and transport hydrology models.     

Different collector types for sampling deposition of polycyclic aromatic hydrocarbons--comparison of measurement results and their uncertainty

Different collector types, sample workup procedures and analysis methods to measure the deposition of polycyclic aromatic hydrocarbons (PAH) were tested and compared. Whilst sample workup and analysis methods did not influence the results of PAH deposition measurements, using different collector types changed the measured deposition rates of PAH significantly. The results obtained with a funnel-bottle collector showed the highest deposition rates and a low measurement uncertainty. The deposition rates obtained with the wet-only collectors were the lowest at industrial sites and under dry weather conditions. For the open-jar collectors the measurement uncertainty was high. Only at an industrial site with extremely high PAH deposition rates the results of open-jar collectors were comparable to those obtained with funnel-bottle collectors. Thus, if bulk deposition of PAH has to be measured, funnel-bottle combinations are proved to be the collectors of choice. These collectors were the only ones always fulfilling the requirements of European legislation.     

Heat wave hazard classification and risk assessment using artificial intelligence fuzzy logic

The average summer temperatures as well as the frequency and intensity of hot days and heat waves are expected to increase due to climate change. Motivated by this consequence, we propose a methodology to evaluate the monthly heat wave hazard and risk and its spatial distribution within large cities. A simple urban climate model with assimilated satellite-derived land surface temperature images was used to generate a historic database of urban air temperature fields. Heat wave hazard was then estimated from the analysis of these hourly air temperatures distributed at a 1-km grid over Athens, Greece, by identifying the areas that are more likely to suffer higher temperatures in the case of a heat wave event. Innovation lies in the artificial intelligence fuzzy logic model that was used to classify the heat waves from mild to extreme by taking into consideration their duration, intensity and time of occurrence. The monthly hazard was subsequently estimated as the cumulative effect from the individual heat waves that occurred at each grid cell during a month. Finally, monthly heat wave risk maps were produced integrating geospatial information on the population vulnerability to heat waves calculated from socio-economic variables.     

On how environmental stringency influences adoption of best management practices in agriculture

There are relatively few Federal environmental regulations that influence agricultural production in the US. However, many local and state environmental rules may influence the management practices on US farms as might interactions between urban population centers and agricultural producers. Detailed analysis of corn farms gives insight into these relationships and suggests that stringent environmental regulations could increase the likelihood of adoption of certain conservation practices, all else being constant, but that the interaction between urban populations has less of an effect on the adoption decisions.     

Biological sweetening of energy gases mimics in biotrickling filters

Removal of hydrogen sulfide from waste and energy-rich gases is required, not only because of environmental health and safety reasons, but also because of operational reasons if such gases have to be used for energy generation. A biotrickling filter for the removal of ultra-high concentrations of H2S from oxygen-poor gases is proposed and studied in this work. Two laboratory-scale biotrickling filters were used to study the startup period and to determine the long-term performance of the gas sweetening process. The inlet H2S concentration ranged from 900 to 12000ppmv and two different packing materials were investigated. There was no toxicity effect observed even at a the highest H2S concentration, and maximum elimination capacities of 280 and 250g H2Sm(-3)h(-1) were obtained at gas contact times of 167 and 180s, respectively. Elemental sulfur and sulfate were found to be the most abundant end-products of the biological oxidation of sulfide when operated under microaerophilic conditions. The biotrickling filter was able to quickly recover its nominal performance after different load increases and system shutdowns simulating field operation. The results reported here show that biotreatment can be an interesting alternative to conventional gas sweetening systems normally used for such applications.     

Ecological recovery of vegetation on a coke-factory soil: role of plant antioxidant enzymes and possible implications in site restoration

The present paper investigated the short-term colonization by plants of a highly degraded soil in field conditions. The objectives were to identify, through phytosociological analysis, the plant species able to grow on such polluted areas and to characterize pollutant effects at different biological levels through analyses of plant oxidative status, plant growth or community indexes of richness and biodiversity. Our results showed that among the plants present in the uncontaminated surrounding area, only few species were able to colonize the polluted soil. These species were typical of the first years of grassland successions. Ecological indexes proved that the polluted soil vegetation presented a lower degree of species richness and biodiversity than the control area. These discrepancies were partly explained by pollutant phytotoxicity. Indeed, for several species including Erigeron canadensis and Oenothera biennis, we observed toxic effects of the polluted soil on plant height and biomass. Moreover, at the cellular level, changes in antioxidant enzyme activities (SOD, CAT, APX, GPX and GRD) and lipid peroxidation level (MDA) were observed. Such biochemical changes seemed to play an important role on plant sensitivity/tolerance to pollutants and thus to render them more or less competitive for colonization of such disturbed areas.     

Sorption and desorption of sulfadiazine in soil and soil-manure systems

Sulfadiazine is a widely used veterinary medicine that has high potential to enter the environment, especially the soil compartment by the application of manure on agricultural land and grass land or by the deposition of dung pats on pasture. Once it reaches the soil environments, it may enter into surface and ground water. Therefore, sorption-desorption behavior of sulfadiazine was studied under laboratory conditions in five different soils varying in their physicochemical properties. A batch equilibration technique was used with initial aqueous solution concentration of sulfadiazine at 5, 0.5, 0.05, and 0.005 microg mL(-1). Sorption-desorption data in soils with and without manure were well fitted with Freundlich model in log form (r(2), 0.99). A sorption-desorption hysteresis effect was apparent in all soils. A significant amount of sulfadiazine was found tightly bound to the soil particles and did not desorb after the desorption process. Moreover, presence of manure enhanced hysteresis effect. Hysteresis coefficient (H) value from soils in absence of manure (0.9-1.0) increased to the soils in presence of manure (0.9-1.8). Soils in the absence of manure showed low level of K(D Sorp.) values ranging from 0.1 to 24.3, suggesting low level sorption of sulfadiazine with appreciable risk of run-off and leaching, and in turn, surface and ground water contamination. However, presence of manure increased the sorption tendency of sulfadiazine significantly (K(D Sorp.), 6.9-40.2). K(D) values pertaining to desorption cycle increased from 1.2-90.4 to 10.4-167.3 in absence and presence of manure, respectively.     

Intestinal absorption of the acetamiprid neonicotinoid by Caco-2 cells: transepithelial transport, cellular uptake and efflux

The human intestinal absorption of acetamiprid (AAP) using the Caco-2 cell line reveals that AAP flux was active in a bidirectional mode with an apparent permeability coefficient of 26 x 10(-6) cm x s(-1) at 37 degrees C. Apical uptake was concentration-dependent and unsaturated for AAP concentrations up to 200 micro M. AAP cell preloading demonstrated the involvement of active transport mechanisms. Arrhenius plot analysis revealed an unusual profile with two apparent activation energies suggesting two transport processes. Uptake Vi studies indicated the involvement of a sodium-dependent transporter, the presence of a common transporter of AAP and nicotine and the involvement of Ti-sensitive ATP-dependent efflux transporters. Apical efflux investigations showed the involvement of inward active transporter(s). Whereas vincristine had no effect on intracellular accumulation, taxol and daunorubicin treatments unexpectedly led to 10% and 23% reductions respectively, suggesting that the latter shared a common inward transporter with AAP. All these results suggest full and express AAP absorption in vivo with transport involving both inward and outward, passive and active mechanisms. Thus, AAP or its metabolites could be representative of a risk for human health after its ingestion in food.     

Innovative technologies to remove alkylphenols from wastewater: a review

Environmental Chemistry Letters - Alkylphenols and alkylphenol polyethoxylates are emerging hazardous contaminants due in particular to their endocrine-disrupting properties. These compounds...