Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO₂)), cerium(IV) oxide (CeO₂) and iron(II, III) oxide (Fe₃O₄) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO₂ NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO₂ NPs, whereas cholinesterase activity significantly increased after CeO₂ NP and Fe₃O₄ NP exposure. Catalase activity significantly increased in larvae exposed to Fe₃O₄ NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.     

New evidences in the complexity of contamination of the lagoon of Venice: polybrominated diphenyl ethers (PBDEs) pollution

This study presents the first evaluation of the current pollution by polybrominated diphenyl ethers (PBDEs) of surface sediments from the Lagoon of Venice. We focused the research on tri-to hepta-BDEs, the main components of penta- and octa-mixtures, which are considered to be the most toxic for the biocoenosis. The results pointed out a quite homogeneous contamination of this keystone European transitional environment, with ∑ ₁₃PBDEs values ra nging from 0.39 to 6.78 ng/g dry weight; these values reflect low to moderate pollution levels, which is in conformity to other coastal European ecosystems. The average PBDE profile of the lagoon sediments follows this decreasing trend of congeners: BDE-47>BDE-99> >BDE-190>BDE-28>BDE-153>BDE-154>BDE-138, BDE-183, and BDE-17, which is similar to the worldwide distribution pattern. BDE-47 and BDE-99 revealed a recent use of a penta-BDE mixture, while the presence of hepta-BDEs (BDE-183 and BDE-190) in all of the sites can indicate the actual use of a deca-BDE formulation, because these congeners are considered to be debrominated byproducts of BDE-209 degradation.     

River pollution remediation monitored by optical and infrared high-resolution satellite images

The Bormida River Basin, located in the northwestern region of Italy, has been strongly contaminated by the ACNA chemical factory. This factory was in operation from 1892 to 1998, and contamination from the factory has had deleterious consequences on the water quality, agriculture, natural ecosystems and human health. Attempts have been made to remediate the site. The aims of this study were to use high-resolution satellite images combined with a classical remote sensing methodology to monitor vegetation conditions along the Bormida River, both upstream and downstream of the ACNA chemical factory site, and to compare the results obtained at different times before and after the remediation process. The trends of the Normalised Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI) along the riverbanks are used to assess the effect of water pollution on vegetation. NDVI and EVI values show that the contamination produced by the ACNA factory had less severe effects in the year 2007, when most of the remediation activities were concluded, than in 2006 and 2003. In 2007, the contamination effects were noticeable up to 6 km downstream of the factory, whereas in 2003 and 2006 the influence range was up to about 12 km downstream of the factory. The results of this study show the effectiveness of remediation activities that have been taking place in this area. In addition, the comparison between NDVI and EVI shows that the EVI is more suitable to characterise the vegetation health and can be considered an additional tool to assess vegetation health and to monitor restoration activities.     

Towards the harmonization between National Forest Inventory and Forest Condition Monitoring. Consistency of plot allocation and effect of tree selection methods on sample statistics in Italy

In the frame of a process aiming at harmonizing National Forest Inventory (NFI) and ICP Forests Level I Forest Condition Monitoring (FCM) in Italy, we investigated (a) the long-term consistency between FCM sample points (a subsample of the first NFI, 1985, NFI_1) and recent forest area estimates (after the second NFI, 2005, NFI_2) and (b) the effect of tree selection method (tree-based or plot-based) on sample composition and defoliation statistics. The two investigations were carried out on 261 and 252 FCM sites, respectively. Results show that some individual forest categories (larch and stone pine, Norway spruce, other coniferous, beech, temperate oaks and cork oak forests) are over-represented and others (hornbeam and hophornbeam, other deciduous broadleaved and holm oak forests) are under-represented in the FCM sample. This is probably due to a change in forest cover, which has increased by 1,559,200 ha from 1985 to 2005. In case of shift from a tree-based to a plot-based selection method, 3,130 (46.7 %) of the original 6,703 sample trees will be abandoned, and 1,473 new trees will be selected. The balance between exclusion of former sample trees and inclusion of new ones will be particularly unfavourable for conifers (with only 16.4 % of excluded trees replaced by new ones) and less for deciduous broadleaves (with 63.5 % of excluded trees replaced). The total number of tree species surveyed will not be impacted, while the number of trees per species will, and the resulting (plot-based) sample composition will have a much larger frequency of deciduous broadleaved trees. The newly selected trees have—in general—smaller diameter at breast height (DBH) and defoliation scores. Given the larger rate of turnover, the deciduous broadleaved part of the sample will be more impacted. Our results suggest that both a revision of FCM network to account for forest area change and a plot-based approach to permit statistical inference and avoid bias in the tree sample composition in terms of DBH (and likely age and structure) are desirable in Italy. As the adoption of a plot-based approach will keep a large share of the trees formerly selected, direct tree-by-tree comparison will remain possible, thus limiting the impact on the time series comparability. In addition, the plot-based design will favour the integration with NFI_2.     

Anodic oxidation of benzoquinone using diamond anode

The anodic degradation of 1,4-benzoquinone (BQ), one of the most toxic xenobiotic, was investigated by electrochemical oxidation at boron-doped diamond anode. The electrolyses have been performed in a single-compartment flow cell in galvanostatic conditions. The influence of applied current (0.5–2 A), BQ concentration (1–2 g dm^?3), temperature (20–45 °C) and flow rate (100–300 dm³ h^?1) has been studied. BQ decay kinetic, the evolution of its oxidation intermediates and the mineralization of the aqueous solutions were monitored during the electrolysis by high-performance liquid chromatograph (HPLC) and chemical oxygen demand (COD) measurements. The results obtained show that the use of diamond anode leads to total mineralization of BQ in any experimental conditions due to the production of oxidant hydroxyl radicals electrogenerated from water discharge. The decay kinetics of BQ removal follows a pseudo-first-order reaction, and the rate constant increases with rising current density. The COD removal rate was favoured by increasing of applied current, recirculating flow rate and it is almost unaffected by solution temperature.     

Effects of climate change on surface-water photochemistry: a review

Information concerning the link between surface-water photochemistry and climate is presently very scarce as only a few studies have been dedicated to the subject. On the basis of the limited knowledge that is currently available, the present inferences can be made as follows: (1) Warming can cause enhanced leaching of ionic solutes from the catchments to surface waters, including cations and more biologically labile anions such as sulphate. Preferential sulphate biodegradation followed by removal as organic sulphides in sediment could increase alkalinity, favouring the generation of the carbonate radical, CO₃ ^·?. However, this phenomenon would be easily offset by fluctuations of the dissolved organic carbon (DOC), which is strongly anticorrelated with CO₃ ^·?. Therefore, obtaining insight into DOC evolution is a key issue in understanding the link between photochemistry and climate. (2) Climate change could exacerbate water scarcity in the dry season in some regions. Fluctuations in the water column could deeply alter photochemistry that is usually favoured in shallower waters. However, the way water is lost would strongly affect the prevailing photoinduced processes. Water outflow without important changes in solute concentration would mostly favour reactions induced by the hydroxyl and carbonate radicals (·OH and CO₃ ^·?). In contrast, evaporative concentration would enhance reactions mediated by singlet oxygen (¹O₂) and by the triplet states of chromophoric dissolved organic matter (³CDOM*). (3) In a warmer climate, the summer stratification period of lakes would last longer, thereby enhancing photochemical reactions in the epilimnion but at the same time keeping the hypolimnion water in the dark for longer periods.     

Visible-light driven oxidation of gaseous aliphatic alcohols to the corresponding carbonyls via TiO2 sensitized by a perylene derivative

Sensitized P25 TiO₂ was prepared by wet impregnation with a home-prepared perylene dye, i.e., N,N′-bis(2-(1-piperazino)ethyl)-3,4,9,10-perylene-tetracarboxylic acid diimide dichloride (PZPER). Energy levels of PZPER were found to be compatible with those of TiO₂ allowing fast electron transfer. The obtained catalyst has been characterized and used in the gas-phase partial oxidation of aliphatic primary and secondary alcohols, i.e., methanol, ethanol, and 2-propanol. The reaction was carried out under cut-off (λ?>?400 nm) simulated solar radiation in O₂ atmosphere. The perylene derivative allowed a good absorbance of visible radiation thanks to its low optical energy gap (2.6 eV) which was evaluated by cyclic voltammetry. The optimal organic sensitizing amount was found to be 5.6 % w/w in terms of yield in carbonyl derivatives. Moreover, no change in reactivity/selectivity was observed after 10-h irradiation thus confirming the catalyst stability. Yields into formaldehyde, acetaldehyde, and acetone were 67, 70, and 96 %, respectively. No significant amounts of organic byproducts were detected but for methanol oxidation, whereas a minor amount of the substrate degraded to CO₂.     

Examining green public procurement using content analysis: existing difficulties for procurers and useful recommendations

Green public procurement (GPP) promises great potential for improving the environmental impact of many public organizations. However, the effects this instrument will have in the near future are unclear as there is little evidence on its exact level of engagement. This study thus aims to analyze the contents of tenders in terms of green criteria by specifically focusing on the building and construction sector. A total of 164 Italian public tenders were analyzed according to a protocol of analysis based on the GPP toolkit developed by the European Commission. Starting from a content analysis used in previous studies, a complete list of green criteria was developed in order to investigate their prevalence in the sample selected, with the aim of exploring their frequency, distribution and correlation. The results revealed a limited use of green criteria, which were mainly included as technical specifications and award criteria, thus shedding light on the difficulties that procurers are experiencing in the implementation of GPP practices. Several suggestions for policy makers and managers are identified for a better and faster implementation of green public procurement tools and methods.     

Air Quality Modeling in the South Coast Air Basin of California: What Do the Numbers Really Mean?

Abstract

This study evaluates air quality model sensitivity to input and to model components. Simulations are performed using the California Institute of Technology (CIT) airshed model. Results show the impacts on ozone (O₃) concentration in the South Coast Air Basin (SCAB) of California because of changes in: (1) input data, including meteorological conditions (temperature, UV radiation, mixing height, and wind speed), boundary conditions, and initial conditions (ICs); and (2) model components, including advection solver and chemical mechanism. O₃ concentrations are strongly affected by meteorological conditions and, in particular, by temperature. ICs also affect O₃ concentrations, especially in the first 2 days of simulation. On the other hand, boundary conditions do not significantly affect the absolute peak O₃ concentration, although they do affect concentrations near the inflow boundaries. Moreover, predicted O₃ concentrations are impacted considerably by the chemical mechanism. In addition, dispersion of pollutants is affected by the advection routine used to calculate its transport. Comparison among CIT, California Photochemical Grid Model (CALGRID), and Urban Airshed Model air quality models suggests that differences in O₃ predictions are mainly caused by the different chemical mechanisms used. Additionally, advection solvers contribute to the differences observed among model predictions. Uncertainty in predicted peak O₃ concentration suggests that air quality evaluation should not be based solely on this single value but also on trends predicted by air quality models using a number of chemical mechanisms and with an advection solver that is mass conservative.