Influence of water allocation and freshwater inflow on oyster production: a hydrodynamic-oyster population model for Galveston Bay,Texas, USA

A hydrodynamic-oyster population model was developed to assess the effect of changes in freshwater inflow on oyster populations in Galveston Bay, Texas, USA. The population model includes the effects of environmental conditions, predators, and the oyster parasite, Perkinsus marinus, on oyster populations. The hydrodynamic model includes the effects of wind stress, river runoff, tides, and oceanic exchange on the circulation of the bay. Simulations were run for low, mean, and high freshwater inflow conditions under the present (1993) hydrology and predicted hydrologies for 2024 and 2049 that include both changes in total freshwater inflow and diversions of freshwater from one primary drainage basin to another.Freshwater diversion to supply the Houston metropolitan area is predicted to negatively impact oyster production in Galveston Bay. Fecundity and larval survivorship both decline. Mortality from Perkinsus marinus increases, but to a lesser extent. A larger negative impact in 2049 relative to 2024 originates from the larger drop in fecundity under that hydrology. Changes in recruitment and mortality, resulting in lowered oyster abundance, occur because the bay volume available for mixing freshwater input from the San Jacinto and Buffalo Bayou drainage basins that drain metropolitan Houston is small in comparison to the volume of Trinity Bay that presently receives the bulk of the bay's freshwater inflow. A smaller volume for mixing results in salinities that decline more rapidly and to a greater extent under conditions of high freshwater discharge.Thus, the decline in oyster abundance results from a disequilibrium between geography and salinity brought about by freshwater diversion. Although the bay hydrology shifts, available hard substrate does not. The simulations stress the fact that it is not just the well-appreciated reduction in freshwater inflow that can result in decreased oyster production. Changing the location of freshwater inflow can also significantly impact the bay environment, even if the total amount of freshwater inflow does not change.     

Critique of present wetlands mitigation policies in the united states based on an analysis of past restoration projects in San Francisco Bay

A detailed evaluation of past wetland restoration projects in San Francisco Bay was undertaken to determine their present status and degree of success. Many of the projects never reached the level of success purported and others have been plagued by serious problems. On the basis of these findings, it is debatable whether any sites in San Francisco Bay can be described as completed, active, or successful restoration projects at present. In spite of these limited accomplishments, wetland creation and restoration have been adopted in the coastal permit process as mitigation to offset environmental damage or loss of habitat. However, because the technology is still largely experimental, there is no guarantee that man-made wetlands will persist as permanent substitutes for sacrificed natural habitats. Existing permit policies should be reanalyzed to insure that they actually succeed in safeguarding diminishing wetlands resources rather than bartering them away for questionable habitat substitutes. Coastal managers must be more specific about project requirements and goals before approval is granted. Continued research on a regional basis is needed to advance marsh establishment techniques into a proven technology. In the meantime, policies encouraging or allowing quid pro quo exchanges of natural wetlands with man-made replacements should proceed with caution. The technology and management policies used at present are many steps ahead of the needed supporting documentation.     

Spatial Extent Of Degraded Sediment Quality In Puget Sound (Washington State, U.S.A.) Based Upon Measures Of The Sediment Quality Triad

A survey was designed and conducted to determine the severity, spatial patterns, and spatial extent of degraded sediment quality in Puget Sound (Washington State, USA). A weight of evidence compiled from results of chemical analyses, toxicity tests, and benthic infaunal analyses was used to classify the quality of sediments. Sediment samples were collected from 300 locations within a 2363 km² area extending from the US/Canada border to the inlets of southern Puget Sound and Hood Canal. Degraded conditions, as indicated with a combination of high chemical concentrations, significant toxicity, and adversely altered benthos, occurred in samples that represented about 1% of the total area. These conditions invariably occurred in samples collected within urbanized bays and industrial waterways, especially near the urban centers of Everett, Seattle, Tacoma, and Bremerton. Sediments with high quality (as indicated by no toxicity, no contamination, and the presence of a relatively abundant and diverse infauna) occurred in samples that represented a majority (68%) of the total study area. Sediments in which results of the three kinds of analyses were not in agreement were classified as intermediate in quality and represented about 31% of the total area. Relative to many other estuaries and marine bays of the USA, Puget Sound sediments ranked among those with minimal evidence of toxicant-induced degradation.     

Use of the instream flow incremental methodology: A tool for negotiation

The resolution of conflicts arising from differing values and water uses requires technical information and negotiating skills. This article outlines the Instream Flow Incremental Methodology (IFIM), developed by the US Fish and Wildlife Service, and demonstrates that its use to quantify flows necessary to protect desired instream values aids negotiation by illustrating areas of agreement and possible compromises between conflicting water interests. Pursuant to a Section 404 permit application to the US Army Corps of Engineers made by City Utilities of Springfield, Missouri, in 1978, IFIM provided the means by which City Utilities, concerned with a secure water supply for a growing population, and those advocating instream values were satisfied that their requirements were met. In tracing the 15-month process, the authors conclude that the application of IFIM, as well as the cooperative stance adopted by the parties involved, were the key ingredients of the successful permit application.     

Heavy Metal Concentrations in and Around Households Near a Secondary Lead Smelter

Housedusts and garden soils were sampled in 14 houses in the vicinity of a secondary Pb smelter and analysed for concentrations of Pb, Zn, Cu, Cd, As, and Hg. Sixty-one topsoil samples were also taken from a 2 km² grid covering the smelter grounds and surrounding residential areas and analysed for concentrations of Pb, Zn, Cd and Cu. Contour maps generated from the grid data indicate significant contamination in the area (maximum Pb concentration 58 500 g g^-1), particularly down-wind of the smelter grounds. A geometric mean Pb concentration of 2225 g g^-1 was recorded in garden soil and similarly elevated levels were recorded for Zn, Cd, As and Sb. In housedusts, a geometric mean Pb concentration of 1668 g g^-1 was observed. Whilst housedust metal concentrations were generally elevated, compared to other urban or residential areas, there appears to be a large degree of attenuation of the metals between the exterior and interior environments of the homes studied. A significant correlation was not recorded between metal concentrations of garden soils and housedusts. There were significant correlations for: distance from the smelter against garden soil metal concentrations; garden soil metal concentrations against each other; housedust metal concentrations against each other; and house age against garden soil metal concentrations.     

Analysis of river water samples utilising a prototype industrial sensing system for phosphorus based on micro-system technology

The application of a phosphorus monitoring device based on microsystems technology (MST) to the analysis of river water is presented. An alternative to the standard molybdenum blue method known as the yellow vanadomolybdophosphoric acid method has been very effectively implemented. The method is simple, a reagent and sample are mixed in a 1:1 ratio forming a yellow complex that absorbs strongly below 400 nm in the UV spectrum. The kinetics of the reaction are rapid and sample turnaround is typically 3 min at room temperature. Therefore a very uncomplicated microfluidic design can be adopted. The working wavelength was chosen as 380 nm to coincide with the peak output of a UV-LED narrow bandwidth light source recently developed by Nichia. The limit of detection for the yellow method in the microfluidic system is 0.2 ppm with a dynamic linear range from 0-50 ppm. The method was applied to a measurement of phosphorus in a local river at specific sampling points along its course.     

Diversion from landfill: quality products from valuable plastics

Mechanical recycling of 100% post-consumer plastic waste into high-quality products has been performed. The chemical and physical properties of these recycled materials have been compared with similar products manufactured from virgin resins. The properties of a blow-moulded bottle prepared from 100% post-consumer high-density polyethylene (HDPE) showed that this recycled polymer exceeded the materials specifications for virgin plastic designs. Similarly, a sample of thermoplastic polyolefin (TPO, 100% polypropylene), obtained entirely from shredder residue (SR) displayed sufficient material strength for future separation and reprocessing.     

Persistent organic pollutants in Alaskan ringed seal (Phoca hispida) and walrus (Odobenus rosmarus) blubber

Since 1987, the Alaska Marine Mammal Tissue Archival Project (AMMTAP) has collected tissues from 18 marine mammal species. Specimens are archived in the National Institute of Standards and Technology's National Biomonitoring Specimen Bank (NIST-NBSB). AMMTAP has collected blubber, liver and/or kidney specimens from a number of ringed seals (Phoca hispida) from the areas near Nome and Barrow, Alaska and walruses (Odobenus rosmarus) from several locations in the Bering Sea. Thirty-three ringed seal and 15 walrus blubber samples from the NIST-NBSB were analyzed for persistent organic pollutants (POPs). The compounds determined included PCBs (28 congeners or congener groups), DDT and related compounds, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes, dieldrin, and mirex. POP concentrations in ringed seal blubber were significantly higher in Barrow than in Nome when statistically accounting for the interaction of age and gender; HCB, however, was not statistically different between the two locations. Unlike males, POP concentrations and age were not significantly correlated in females probably as a result of lactational loss. POP concentrations in walrus blubber were lower than in ringed seal blubber for SigmaPCBs, chlordanes, and HCHs, but higher for dieldrin and mirex. POP concentrations in ringed seals and walrus from Alaska provide further evidence that the western Arctic tends to have lower or similar POP concentrations compared to the eastern Canadian Arctic.     

Economic and Environmental Benefits of Using Hardwood Sawmill Waste as a Raw Material for Particleboard Production

Annually, sawmills and other wood-processing factories generate a significant amount of scrap materials which are sent to landfills or incinerated. The amount of residue generated in Australia annually is estimated at 200,000 tonnes. A research project conducted at RMIT University explored utilizing these waste materials as particleboard furnish. The research team has now established a methodology for making particleboard in the laboratory using 100% hardwood sawmill residues, developing a particleboard product made in the laboratory which has acceptable mechanical properties and density profiles in accordance with the Australian Standards. However, this board product has some perceived issues which have been hindering ready commercial uptake. The current product requires a 10% higher resin load, has a 10% higher board density, and requires 10% longer pressing times compared to normal softwood particleboard. The paper presents an analysis of the current production process of particleboard to investigate the economic feasibility of particleboard production using hardwood sawmill residues. A major challenge in the analysis is converting the environmental benefit of utilizing large quantities of sawmill residue to a monetary term. Investigation of the global impact of particleboard by considering emission of carbon dioxide to the atmosphere is also included. A comparison is presented between different methods of disposing wood residues to understand the environmental benefit of using hardwood residue in particleboard.     

Improving team effectiveness using tactical decision games

This paper addresses the development of training in team-level decision making to lead to improvements in safety and performance. A one-day Workshop was developed around tactical decision games (TDGs) for use by action teams, i.e. involving a team of multi-disciplinary experts, in the oil and gas drilling industry. Three TDGs were conducted to help team members to rehearse how they would respond to potential challenging situations, focusing in particular on team skills, such as decision making, situation awareness and communication. TDGs have previously been presented as a useful training technique to improve decision making and have been introduced in many high hazard industries [Crichton, M., Flin, R., Rattray, W.A., 2000. Training decision makers – tactical decision games. Journal of Contingencies and Crisis Management 8(4), 208–217]. Building on TDGs for individuals, in a team-based TDG, team members discuss the scenario and reach a team-based solution, allowing team members to recognise the potential differing perspectives brought to the solution by team members from different disciplines. Specific team skills aspects raised during the TDG scenario were then generalised to the wider project, and their impact on overall team performance, safety, and effectiveness. Members of a deepwater exploration wells team (n = 30) attended the Workshop and reported that the use of TDGs in the Workshop was valuable in defining and illustrating team skills and their influence on team performance, and helping to prepare better for their forthcoming operations.