Geodiversity Assessment of Paraná State (Brazil): An Innovative Approach

Geodiversity is considered as the natural range of geological, geomorphological, and soil features, including their assemblages, relationships, properties, interpretations, and systems. A method developed for the quantitative assessment of geodiversity was applied to Paraná, a Brazilian state with an area of about 200,000 km². The method is based on the overlay of a grid over different maps at scales ranging from 1/500,000 to 1/650,000, with the final Geodiversity Index the sum of five partial indexes calculated on a 25 × 25 km grid. The partial indexes represent the main components of geodiversity, including geology (stratigraphy and lithology), geomorphology, paleontology, and soils. The fifth partial index covers mineral occurrences of geodiversity, such precious stones and metals, energy and industrial minerals, mineral waters, and springs. The Geodiversity Index takes the form of an isoline map that can be used as a tool in land-use planning, particularly in identifying priority areas for conservation, management, and use of natural resources at the state level.     

Environmental management and firm performance: a case study

This study has as its aim to help to clarify the relationship between environmental management and economic performance by integrating it into a wider framework that includes the relationship between environmental strategy and firm performance, the latter being understood as the combination of environmental performance, competitive advantage and economic performance. A case study of the COATO farming cooperative showed us that its environmental management, focused on prevention logic, has had a positive net effect on its environmental performance. Besides, the order in which these practices were adopted favoured the development of new organisational capabilities that have contributed to the appearance of advantages derived from the greater accumulated experience of employees in creating new projects that are designed to reduce residues and pollution. COATO has also obtained a competitive advantage in differentiation thanks to an improved brand image and to its increased credibility in business relationships. Finally, a positive correlation exists between the pioneering proactive strategy adopted by this cooperative and the improvement of its firm performance with respect to the other firms in its sector.     

Solute transport modeling under cultivated sandy soils and transient water regime

Drainable lysimeters offer the possibility to integrate heterogeneous solute leaching conditions caused by row crops and transient water regime, and to conveniently measure water and solute fluxes at the drainage outlet. To compare solute leaching behavior in and around drainable lysimeters operating under a transient water regime in potato (Solanum tuberosum L.) fields, parameters of the convective lognormal transfer (CLT) function model were fitted using bromide (Br-) flux concentrations (Cf) measured in lysimeters and from Br- resident concentrations (Cr) measured in adjacent soil cores. Expected mean values Ez(I) obtained from Cr and Cf CLT parameters were equivalent and well correlated (R2 = 0.78). However, estimated median values mu of the CLT function were smaller when derived from Cr (1.05 to 1.28) compared with Cf (1.23 to 2.14). Most mu values were also smaller than previously reported values for a 30-cm reference depth, indicating that 50% of solute mass would leach more readily in these coarse sandy soils. Higher variance and dispersion of Cr compared with those of Cf could be related to a smaller sampling support (sample size/sampling area) in the case of Cr measured by soil coring, or to disruption of solute transport mechanisms in the repacked lysimeter. Retained Br- in the top soil layer after 12 to 17 cm of cumulative drainage was indicated by measured Cr. Neither CLT function simulated well residual topsoil Cr values, indicating that Br- plant cycling or preferential flow probably interfered even though tuber Br- uptake was relatively small.     

Air quality impact assessment of multiple open pit coal mines in northern Colombia

The coal mining region in northern Colombia is one of the largest open pit mining regions of the world. In 2009, there were 8 mining companies in operation with an approximate coal production of ～70 Mtons/year. Since 2007, the Colombian air quality monitoring network has reported readings that exceed the daily and annual air quality standards for total suspended particulate (TSP) matter and particles with an equivalent aerodynamic diameter smaller than 10 μm (PM??) in nearby villages. This paper describes work carried out in order to establish an appropriate clean air program for this region, based on the Colombian national environmental authority requirement for modeling of TSP and PM(10) dispersion. A TSP and PM?? emission inventory was initially developed, and topographic and meteorological information for the region was collected and analyzed. Using this information, the dispersion of TSP was modeled in ISC3 and AERMOD using meteorological data collected by 3 local stations during 2008 and 2009. The results obtained were compared to actual values measured by the air quality monitoring network. High correlation coefficients (>0.73) were obtained, indicating that the models accurately described the main factors affecting particle dispersion in the region. The model was then used to forecast concentrations of particulate matter for 2010. Based on results from the model, areas within the modeling region were identified as highly, fairly, moderately and marginally polluted according to local regulations. Additionally, the contribution particulate matter to the pollution at each village was estimated. Using these predicted values, the Colombian environmental authority imposed new decontamination measures on the mining companies operating in the region. These measures included the relocation of three villages financed by the mine companies based on forecasted pollution levels.     

Combinatory chemical and biological approaches to investigate metal elements in agricultural runoff water

As part of a project studying the interactions between farming practices, soil erosion processes, and fate of agricultural pollutants into runoff waters, we conducted a pilot study to investigate the relationship between metal contents and metallothionein-2A (MT-2A) as a bioindicator of metal exposure. Runoff water samples were collected between May and November 1999 at the point of outlet of an elementary watershed located in the Paris basin. Selected metals (Al, As, Cd, Cr, Cu, Pb, Hg, Ni, and Zn) were analyzed using conventional techniques. In parallel, human T cells were exposed to water samples for 6 and 18 h and then cell viability and MT-2A gene expression were measured. Results show that among the 10 water samples tested, Al and Zn predominate (highest values = 4.9 and 2.6 microM, respectively), while other metals were below the microM level. Five out of 10 samples induced MT-2A gene expression (30-80% increase at 18 h) as compared with the control. When comparing MT-2A induction profile with metals contents, no obvious correlation was found, suggesting that additional components or parameters are involved. Finally, there was an apparent inverse relationship between Ca concentration and MT-2A gene induction. Although still preliminary, in the absence of longer monitoring, this study shows that MT-2A gene expression is a useful tool to complement chemical analysis in assessing metal elements in water. These combinatory approaches will be pursued and integrated in an ongoing watershed field research project.     

A Systematic Framework for the Design and Implementation of a Quality Management Practice: The Case of a Consulting Engineering Company

Company productivity and competitiveness in today's marketplace requires creative design, innovation, and the reduction of nonconformances, which require costly rework and can damage a firm's reputation with its customers and potential customers. Using the International Organisation of Standardization's (ISO) 9000 and 14000 series of standards, the authors of this article walk readers through the rigorous process of obtaining upper management buy‐in and sponsorship and engaging workers in a bottom‐up approach to establish the procedures necessary to perform world‐class engineering services.