Toxicological aspects of trihalomethanes: a systematic review

Environmental Science and Pollution Research - Chlorine is considered the most used chemical agent for water disinfection worldwide. However, water chlorination can lead to by-product generation...     

Feasibility of composting combinations of sewage sludge,olive mill waste and winery waste in a rotary drum reactor

Representative samples of the following biowastes typically generated in Castilla La Mancha (Spain) were composted using a pilot-scale closed rotary drum composting reactor provided with adequate control systems: waste from the olive oil industry (olive mill waste; OMW), winery–distillery waste containing basically grape stalk and exhausted grape marc (WDW), and domestic sewage sludge. Composting these biowastes was only successful when using a bulking agent or if sufficient porosity was supported. OMW waste composting was not possible, probably because of its negligible porosity, which likely caused anaerobic conditions. WDW was successfully composted using a mixture of solid wastes generated from the same winery. SS was also successfully composted, although its higher heavy metal content was a limitation. Co-composting was an adequate strategy because the improved mixture characteristics helped to maintain optimal operating conditions. By co-composting, the duration of the thermophilic period increased, the final maturity level improved and OMW was successfully composted. Using the proposed reactor, composting could be accelerated compared to classical outdoor techniques, enabling easy control of the process. Moisture could be easily controlled by wet air feeding and leachate recirculation. Inline outlet gas analysis helped to control aerobic conditions without excessive aeration. The temperature reached high values in a few days, and sufficient thermal requirements for pathogen removal were met. The correct combination of biowastes along with appropriate reactor design would allow composting as a management option for such abundant biowastes in this part of Spain.     

Selective effects of natural and synthetic insecticides on mortality of Spodoptera frugiperda (Lepidoptera: Noctuidae) and its predator Eriopis connexa (Coleoptera: Coccinellidae)

Spodoptera frugiperda Smith (Lepidoptera: Noctuidae) is a serious pest of corn in several American countries. It is mainly controlled with synthetic insecticides. The objectives of this study were to evaluate the effects of the natural products, neem oil and pyroligneous extract, and the synthetic insecticide, lufenuron, at 2.50mL water (0.25 %) on the mortality of 2-, 4- and 6-day-old caterpillars of S. frugiperda, and their selectivities against fourth instar larvae of Eriopis connnexa Germar (Coleoptera: Coccinellidae). Four- and 6-day-old S. frugiperda caterpillars showed higher mortality after exposure to neem oil (83.33 ± 0.83 and 89.58 ± 0.90 %, respectively) and lufenuron (95.83 ± 0.96 and 85.41 ± 0.83 %), compared to pyroligneous extract (68.75 ± 0.69 and 31.25 ± 0.31 %). The deleterious effect of pyroligneous extract was higher in 2- (83.33 ± 0.83 % mortality) and 4-day-old (68.75 ± 0.69 %) S. frugiperda caterpillars than in 6-day-old caterpillars (31.25 ± 0.31 %). Larval mortality of the predator E. connexa was lower with neem oil and pyroligneous extract (25.00 ± 0.33 %) than with lufenuron (91.66 ± 1.22 %). Neem oil is thus recommended for control of S. frugiperda because of its high toxicity, combined with its relatively low toxicity to larvae of the natural enemy E. connexa.     

Use of different organic wastes in reducing the potential leaching of propanil,isoxaben, cadusafos and pencycuron through the soil

In this study, we examined the effect of four different organic wastes (OW)—composted sheep manure (CSM), spent coffee grounds (SCG), composted pine bark (CPB) and coir (CR)—on the potential groundwater pollution of propanil and isoxaben (herbicides), cadusafos (insecticide) and pencycuron (fungicide) under laboratory conditions. For this purpose, leaching studies were conducted using disturbed soil columns filled with a clay loam soil (Hipercalcic calcisol). The addition of organic matter (OM) drastically reduced the movement of the studied pesticides. The results obtained point to the interest in the use of agro-industrial and composted OW in reducing the groundwater pollution by pesticide drainage.     

Tailoring dam structures to water quality predictions in new reservoir projects: Assisting decision-making using numerical modeling

Selection of reservoir location, the floodable basin forest handling, and the design of dam structures devoted to water supply (e.g. water outlets) constitute relevant features which strongly determine water quality and frequently demand management strategies to be adopted. Although these crucial aspects should be carefully examined during dam design before construction, currently the development of ad hoc limnological studies tailoring dam location and dam structures to the water quality characteristics expected in the future reservoir is not typical practice. In this study, we use numerical simulation to assist on the design of a new dam project in Spain with the aim of maximizing the quality of the water supplied by the future reservoir. First, we ran a well-known coupled hydrodynamic and biogeochemical dynamic numerical model (DYRESM–CAEDYM) to simulate the potential development of anoxic layers in the future reservoir. Then, we generated several scenarios corresponding to different potential hydraulic conditions and outlet configurations. Second, we built a simplified numerical model to simulate the development of the hypolimnetic oxygen content during the maturation stage after the first reservoir filling, taking into consideration the degradation of the terrestrial organic matter flooded and the adoption of different forest handling scenarios. Results are discussed in terms of reservoir design and water quality management. The combination of hypolimnetic withdrawal from two deep outlets and the removal of all the valuable terrestrial vegetal biomass before flooding resulted in the best water quality scenario.     

Determination of organic compounds in landfill leachates treated by Fenton–Adsorption

The objective of this study was to identify the organic compounds removed from the leachate when treated with Fenton–Adsorption by gas chromatography coupled to mass spectrometry (GC–MS) in order to identify toxic compounds that could be harmful for the environment or human health.The physicochemical characterization of the raw leachate was carried out before and after the Fenton–Adsorption process. The effluent from each stage of this process was characterized: pH, Biological Oxygen Demand (BOD₅), Chemical Oxygen Demand (COD), Total Organic Carbon (TOC), Total Carbon (TC), Inorganic Carbon (IC), Total Solids (TS), Total Suspended Solids (TSS) and Color. The organic compounds were determined by GC–MS.The removal of COD and color reached over 99% in compliance with the Mexican Standard NOM-001-SEMARNAT-1996, which establishes the maximum permissible limits for contaminants present in wastewater discharges to water and national goods. The chromatographic analysis from the Fenton–Adsorption effluent proved that this treatment removed more than 98% of the organic compounds present in the initial sample. The mono (2-ethylhexyl) ester 1,2-benzenedicarboxylic acid persisted, although it is not considered as toxic compound by the NOM-052-SEMARNAT-2005. Therefore, the treated effluent can be safely disposed of into the environment.     

Coarse and fine aerosol source apportionment in Rio de Janeiro,Brazil

The metropolitan area of Rio de Janeiro is one of the twenty biggest urban agglomerations in the world, with 11 million inhabitants in the metropolitan area, and has a high population density, with 1700 hab. km^?2. For this aerosol source apportionment study, the atmospheric aerosol sampling was performed at ten sites distributed in different locations of the metropolitan area from September/2003 to December/2005, with sampling during 24 h on a weekly basis. Stacked filter units (SFU) were used to collect fine and coarse aerosol particles with a flow rate of 17 L min^?1. In both size fractions trace elements were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) as well as water-soluble species by Ion-Chromatography (IC). Also gravimetric analysis and reflectance measurements provided aerosol mass and black carbon concentrations. Very good detection limits for up to 42 species were obtained. Mean annual PM₁₀ mass concentration ranged from 20 to 37 μg m^?3, values that are within the Brazilian air quality standards. Receptor models such as principal factor analysis, cluster analysis and absolute principal factor analysis were applied in order to identify and quantify the aerosol sources. For fine and coarse modes, circa of 100% of the measured mass was quantitatively apportioned to relatively few identified aerosol sources. A very similar and consistent source apportionment was obtained for both fine and coarse modes for all 10 sampling sites. Soil dust is an important component, accounting for 22–72% and for 25–48% of the coarse and fine mass respectively. On the other hand, anthropogenic sources as vehicle traffic and oil combustion represent a relatively high contribution (52–75%) of the fine aerosol mass. The joint use of ICP-MS and IC analysis of species in aerosols has proven to be reliable and feasible for the analysis of large amount of samples, and the coupling with receptor models provided an excellent method for quantitative aerosol source apportionment in large urban areas.