Environmental management and firm performance: a case study

This study has as its aim to help to clarify the relationship between environmental management and economic performance by integrating it into a wider framework that includes the relationship between environmental strategy and firm performance, the latter being understood as the combination of environmental performance, competitive advantage and economic performance. A case study of the COATO farming cooperative showed us that its environmental management, focused on prevention logic, has had a positive net effect on its environmental performance. Besides, the order in which these practices were adopted favoured the development of new organisational capabilities that have contributed to the appearance of advantages derived from the greater accumulated experience of employees in creating new projects that are designed to reduce residues and pollution. COATO has also obtained a competitive advantage in differentiation thanks to an improved brand image and to its increased credibility in business relationships. Finally, a positive correlation exists between the pioneering proactive strategy adopted by this cooperative and the improvement of its firm performance with respect to the other firms in its sector.     

Predictive mapping of soil organic carbon in wet cultivated lands using classification-tree based models: The case study of Denmark

Soil organic carbon (SOC) is one of the most important carbon stocks globally and has large potential to affect global climate. Distribution patterns of SOC in Denmark constitute a nation-wide baseline for studies on soil carbon changes (with respect to Kyoto protocol). This paper predicts and maps the geographic distribution of SOC across Denmark using remote sensing (RS), geographic information systems (GISs) and decision-tree modeling (un-pruned and pruned classification trees). Seventeen parameters, i.e. parent material, soil type, landscape type, elevation, slope gradient, slope aspect, mean curvature, plan curvature, profile curvature, flow accumulation, specific catchment area, tangent slope, tangent curvature, steady-state wetness index, Normalized Difference Vegetation Index (NDVI), Normalized Difference Wetness Index (NDWI) and Soil Color Index (SCI) were generated to statistically explain SOC field measurements in the area of interest (Denmark). A large number of tree-based classification models (588) were developed using (i) all of the parameters, (ii) all Digital Elevation Model (DEM) parameters only, (iii) the primary DEM parameters only, (iv), the remote sensing (RS) indices only, (v) selected pairs of parameters, (vi) soil type, parent material and landscape type only, and (vii) the parameters having a high impact on SOC distribution in built pruned trees. The best constructed classification tree models (in the number of three) with the lowest misclassification error (ME) and the lowest number of nodes (N) as well are: (i) the tree (T1) combining all of the parameters (ME = 29.5%; N = 54); (ii) the tree (T2) based on the parent material, soil type and landscape type (ME = 31.5%; N = 14); and (iii) the tree (T3) constructed using parent material, soil type, landscape type, elevation, tangent slope and SCI (ME = 30%; N = 39). The produced SOC maps at 1:50,000 cartographic scale using these trees are highly matching with coincidence values equal to 90.5% (Map T1/Map T2), 95% (Map T1/Map T3) and 91% (Map T2/Map T3). The overall accuracies of these maps once compared with field observations were estimated to be 69.54% (Map T1), 68.87% (Map T2) and 69.41% (Map T3). The proposed tree models are relatively simple, and may be also applied to other areas.     

Carbon speciation in municipal solid waste incinerator (MSWI) bottom ash in relation to facilitated metal leaching

The release of inorganic and organic contaminants from municipal solid waste incinerator (MSWI) bottom ash is controlled to a large extent by the release of dissolved organic carbon (DOC), and in particular by the reactive humic (HA) and fulvic acids (FA) subfractions of DOC. The properties of organic matter contributing to the release of DOC, HA and FA are, therefore, important for environmental risk assessment. In this study we have quantitatively measured the carbon speciation, and its relation with the leaching of Cu, in three fresh and carbonated MSWI bottom ash samples. Results show that up to only 25% of loss on ignition (LOI) consists of organic carbon (OC), while about 17% of OC in the three samples consists of HA and FA. Up to 50% of DOC in MSWI bottom ash leachates was identified as fulvic acid (FA). This value is substantially higher than previously estimated for these MSWI bottom ash samples and is consistent with the higher recovery of the new method that was applied. The results of this study imply that methods focusing on specific carbon fractions are more appropriate for assessment of environmentally relevant organic carbon species than the measurement of LOI.     

Aspects of biopsy procedures prior to preimplantation genetic diagnosis

Today, preimplantation genetic diagnosis (PGD) is offered in over 40 centres worldwide for an expanded range of genetic defects causing disease. This very early form of prenatal diagnosis involves the detection of affected embryos by fluorescent in situ hybridization (FISH) (sex determination or chromosomal defects) or by polymerase chain reaction (PCR) (monogenic diseases) prior to implantation. Genetic analysis of the embryos involves the removal of some cellular mass from the embryos (one or two blastomeres at cleavage-stage or some extra-embryonic trophectoderm cells at the blastocyst stage) by means of an embryo biopsy procedure. Genetic analysis can also be performed preconceptionally by removal of the first polar body. However, additional information is then often gained by removal of the second polar body and/or a blastomere from the embryo. Removal of polar bodies or cellular material from embryos requires an opening in the zona pellucida, which can be created in a mechanical way (partial zona dissection) or chemical way (acidic Tyrode's solution). However, the more recent introduction of laser technology has facilitated this step enormously. Different biopsy procedures at different preimplantation stages are reviewed here, including their pros and cons and their clinical applications. The following aspects will also be discussed: safety of zona drilling by laser, use of Ca²⁺/Mg²⁺-free medium for decompaction, and removal of one or two cells from cleavage-stage embryos. Copyright © 2001 John Wiley & Sons, Ltd.     

Diel periodicity of pheromone release by females of Planococcus citri and Planococcus ficus and the temporal flight activity of their conspecific males

The diel periodicity of sex pheromone release was monitored in two mealybug species, Planococcus citri and Planococcus ficus (Hemiptera; Pseudococcidae), using sequential SPME/GCMS analysis. A maximal release of 2 ng/h pheromone by 9–12-day-old P. citri females occurred 1–2 h before the beginning of photophase. The highest release of pheromone by P. ficus females was 1–2 ng/2 h of 10–20-day-old females, approximately 2 h after the beginning of photophase. Mating resulted in termination of the pheromone release in both mealybug species. The temporal flight activity of the males was monitored in rearing chambers using pheromone baited delta traps. Males of both P. citri and P. ficus displayed the same flight pattern and began flying at 06:00 hours when the light was turned on, reaching a peak during the first and second hour of the photophase. Our results suggest that other biparental mealybug species display also diel periodicities of maximal pheromone release and response. Direct evaluation of the diel periodicity of the pheromone release by the automatic sequential analysis is convenient and will be very helpful in optimizing the airborne collection and identification of other unknown mealybug pheromones and to study the calling behavior of females. Considering this behavior pattern may help to develop more effective pheromone-based management strategies against mealybugs.     

Preventive activity in the greenhouse-construction industry of south-eastern Spain

Preventive action in companies is one of the bases of ergonomic intervention. Therefore, in the present work, the preventive activity of greenhouse-construction companies in south-eastern Spain is characterized. A sample was taken by means of a questionnaire structured in four groups of variables: general characteristics of the company, characteristics of safety and health in the construction procedures, characteristics of prevention and management in safety and health, and characteristics of the coordination during the execution of the work. The results indicate that the prevention is very poor, not adopting any preventive-management model for internationally recognized work hazards so that the information and training in preventive matters of companies and workers is insufficient. In addition, the companies have been classified into three clusters, correlating the company size and prevention management of labour hazards, revealing that the companies with higher gross income and number of workers showed better prevention management.