Analysis of PM2.5and PM10 in the Atmosphere of Mexico City during 2000-2002

Abstract

During the last 10 years, high atmospheric concentrations of airborne particles recorded in the Mexico City metropolitan area have caused concern because of their potential harmful effects on human health. Four monitoring campaigns have been carried out in the Mexico City metropolitan area during 2000-2002 at three sites: (1) Xalos-toc, located in an industrial region; (2) La Merced, located in a commercial area; and (3) Pedregal, located in a residential area. Results of gravimetric and chemical analyses of 330 samples of particulate matter (PM) with an aerodynamic diameter less than 2.5 μm (PM_2.5) and PM with an aerodynamic diameter less than 10 μm (PM₁₀) indicate that (1) PM_2.5/PM₁₀ average ratios were 0.42, 0.46, and 0.52 for Xalostoc, La Merced, and Pedregal, respectively; (2) the highest PM_2.5 and PM₁₀ concentrations were found at the industrial site; (3) PM_2.5 and PM₁₀ concentrations were lower at nighttime; (4) PM_2.5 and PM₁₀ spatial averages concentrations were 35 and 76 μg/m³, respectively; and (5) when the PM_2.5 standard was exceeded, nitrate, sulfate, ammonium, organic carbon, and elemental carbon concentrations were high. Twenty-four hour averaged PM_2.5 concentrations in Mexico City and Sao Paulo were similar to those recorded in the 1980s in Los Angeles. PM₁₀ concentrations were comparable in Sao Paulo and Mexico City but 3-fold lower than those found in Santiago.     

Diurnal and seasonal variations of carbonyls and their effect on ozone concentrations in the atmosphere of Monterrey,Mexico

Few studies have been made regarding carbonyl concentrations in Monterrey, México. The Monterrey Metropolitan Area (MMA) has the third largest population in the country and has increasing pollution issues. The concentrations of 10 aldehydes and two ketones were measured in the MMA, in the spring and fall of 2011 and 2012. Formaldehyde (16–42 ppbv) was the most abundant carbonyl, followed by acetaldehyde (5–15 ppbv) and acetone (7–15 ppbv). The concentrations showed marked diurnal trends with maximum values between 10:00 a.m. and 2:00 p.m., when photochemical activity is intense. Thus, secondary production of carbonyls is statistically significant in the city. Biogenic production of several carbonyls, such as 2-butanone, was supported by their mid correlation with solar radiation and low correlation with propionaldehyde, which is mainly emitted by anthropogenic sources. The seasonal variability of the concentrations was observed in the first three samplings, with the highest levels reached in the fall. The rainy conditions during the fourth sampling did not allow comparison. Carbonyl–NOx–O₃ analysis was made. Results indicated a carbonyl-sensitive atmosphere, especially during the midday samplings of 10:00 a. m. to 2:00 p.m. and 2:00 p.m. and 6:00 p.m. because of the intense solar radiation during these periods.

Implications:?Monitoring of carbonyls in Monterrey, Mexico, was performed to quantify the pollutant concentration in the city’s atmosphere. Although primary emission is significantly important, the secondary production of the pollutants, along with ozone production being carbonyl sensitive, indicates that air pollution controls must address the direct sources and the precursors of the pollutants to achieve air quality.     

Effects of fine particles on children’s hospital admissions for respiratory health in Seville,Spain

This study analyzes the influence of fine particles PM_2.5 on nonprogrammed children’s hospital admissions that occurred in the city of Seville between 2007 and 2011, and makes an economic assessment of the cost of the children’s hospital admissions for respiratory causes due to particle pollution. The PM_2.5 dose-response functions for each type of hospital admission were used to quantify the cost of the hospital admissions. It can be concluded that the PM_2.5 concentrations have negative effects on bronchiolitis, pneumonia, asthma, and bronchitis and other causes. A reduction of the daily average annual PM_2.5 concentration from the existing levels to 10 µg/m³ would show an annual average reduction of children’s hospital admissions due to respiratory diseases of 0.09 cases. This paper shows that the daily average cost for children hospital admissions due to respiratory reasons in the city of Seville, associated with daily average annual levels of PM_2.5 above 10 µg/m³, was almost 200€.

Implications:?Elevated PM_2.5 concentrations in Seville have negative effects on children’s bronchiolitis, pneumonia, asthma, and bronchitis and other causes. A reduction of the daily average annual PM_2.5 concentration from the existing levels to 10 μg/m³ would suppose an annual mean reduction of children’s hospital admissions due to respiratory diseases of 0.09 cases.     

Degradation of clofibric acid in acidic aqueous medium by electro-Fenton and photoelectro-Fenton

Acidic aqueous solutions of clofibric acid (2-(4-chlorophenoxy)-2-methylpropionic acid), the bioactive metabolite of various lipid-regulating drugs, have been degraded by indirect electrooxidation methods such as electro-Fenton and photoelectro-Fenton with Fe(2+) as catalyst using an undivided electrolytic cell with a Pt anode and an O(2)-diffusion cathode able to electrogenerate H(2)O(2). At pH 3.0 about 80% of mineralization is achieved with the electro-Fenton method due to the efficient production of oxidant hydroxyl radical from Fenton's reaction between Fe(2+) and H(2)O(2), but stable Fe(3+) complexes are formed. The photoelectro-Fenton method favors the photodecomposition of these species under UVA irradiation, reaching more than 96% of decontamination. The mineralization current efficiency increases with rising metabolite concentration up to saturation and with decreasing current density. The photoelectro-Fenton method is then viable for treating acidic wastewaters containing this pollutant. Comparative degradation by anodic oxidation (without Fe(2+)) yields poor decontamination. Chloride ion is released during all degradation processes. The decay kinetics of clofibric acid always follows a pseudo-first-order reaction, with a similar rate constant in electro-Fenton and photoelectro-Fenton that increases with rising current density, but decreases at greater metabolite concentration. 4-Chlorophenol, 4-chlorocatechol, 4-chlororesorcinol, hydroquinone, p-benzoquinone and 1,2,4-benzenetriol, along with carboxylic acids such as 2-hydroxyisobutyric, tartronic, maleic, fumaric, formic and oxalic, are detected as intermediates. The ultimate product is oxalic acid, which forms very stable Fe(3+)-oxalato complexes under electro-Fenton conditions. These complexes are efficiently photodecarboxylated in photoelectro-Fenton under the action of UVA light.     

Comparing the response of biochemical indicators (biomarkers) and biological indices to diagnose the ecological impact of an oil spillage in a Mediterranean river (NE Catalunya, Spain)

Three biomarkers of hydrocarbon exposure, liver 7-ethoxyresourfin-O-deethylase activity (EROD), fluorescent hydrocarbon compounds (FACs) in bilis, and the liver antioxidant enzyme catalase (CAT) were examined in the autochthonous fish species Barbus meridionalis collected in the river Fluvià (NE Catalunya, Spain) after an oil spillage. Four different locations were sampled, including the impacted site, upstream and downstream sites and a reference site. Biomarker responses were compared with diatom and macroinvertebrate community assemblage metrics (Specific Pollution Sensitivity index - IPS, and Iberian Biological Monitoring Working Party - IBMWP, respectively). Chemical analyses denoted that polycyclic aromatic hydrocarbon levels in sediment were much higher at the impacted site than in downstream reaches. Four fold increase of EROD activity together with increased levels of biliary FACs in barbs collected at the spilled site indicated exposure of inhabiting fish to the oil. Additionally, CAT activity was significantly depressed (four fold) when compared to other stations, thus suggesting that fish collected from the impacted sites could be more susceptible to suffer oxidative stress. Biological indices (particularly that of the diatom community IPS) showed slight significant effects between control and impacted sites, indicating that more tolerant taxa were favoured because of the oil spillage. These results support the need to include biochemical responses measured in local species in monitoring programmes aimed to diagnose specific pollution effects in stressed river ecosystems.     

Evaluation of the effects, on canopy arthropods, of two agricultural management systems to control pests in olive groves from north-east of Portugal

This study aims to investigate the effect of management regime on canopy arthropod community of the olive tree (Olea europaea L.). Field studies were performed in two successive years, 2002 and 2003, in two olive groves, one under organic farming and the other under integrated protection. The integrated protection grove was sprayed once a year in June, with dimethoate, to control the anthophagous generation of the olive moth, Prays oleae (Bern.). From April to November of each year, the canopy arthropods were sampled weekly. PRC method was used to analyse the effect of management regime at the community level and results showed that taxa responded differently to insecticide application suggesting that the organic grove was a more suitable habitat for the arthropods than the integrated protection grove. Abundance of arthropods peaked in May and June for both years but, after spraying with dimethoate, decreased significantly in integrated protection grove, recovering very slowly thereafter. Psocoptera, Miridae, Formicidae and Coccinellidae were the most sensitive taxa to insecticide application. Their decreasing in abundance was more evident in the second year of the trial. On the other hand chrysopids showed some tolerance to insecticide applications. These results suggest that the timing of spray is of utmost importance in reducing the side effects of spraying on beneficial arthropods. Moreover, differences in population susceptibility as well as in life cycle patterns must be considered.     

Degradation of the herbicide 2,4-DP by anodic oxidation, electro-Fenton and photoelectro-Fenton using platinum and boron-doped diamond anodes

This paper reports the degradation of 2,4-DP (2-(2,4-dichlorophenoxy)-propionic acid) solutions of pH 3.0 by environmentally friendly electrochemical methods such as anodic oxidation, electro-Fenton and photoelectro-Fenton with a Pt or boron-doped diamond (BDD) anode. In the two latter techniques an O(2)-diffusion cathode was used and 1.0mM Fe(2+) was added to the solution to give hydroxyl radical (*OH) from Fenton's reaction between Fe(2+) and H(2)O(2) generated at the cathode. All treatments with BDD are viable to decontaminate acidic wastewaters containing 2,4-DP since they give complete mineralization, with loss of chloride ion, at high current due to the great production of oxidant *OH at the BDD surface favoring the destruction of final carboxylic acids. *OH formed from Fenton's reaction destroys more rapidly aromatic products, making the electro-Fenton and photoelectro-Fenton processes much more efficient than anodic oxidation. UVA light in photoelectro-Fenton with BDD has little effect on the degradation rate of pollutants. The comparative procedures with Pt lead to slower decontamination because of the lower oxidizing power of this anode. The effect of current on the degradation rate and efficiency of all methods is studied. The 2,4-DP decay always follows a pseudo-first-order kinetics. Chlorohydroquinone, chloro-p-benzoquinone and maleic, fumaric, malic, lactic, pyruvic, acetic, formic and oxalic acids are detected as products by chromatographic techniques. A general sequence accounting for by the reaction of all these intermediates with the different oxidizing agents is proposed.     

Speciation of zinc in contaminated soils

The chemical speciation of zinc in soil solutions is critical to the understanding of its bioavailability and potential toxic effects. We studied the speciation of Zn in soil solution extracts from 66 contaminated soils representative of a wide range of field conditions in both North America and Europe. Within this dataset, we evaluated the links among the dissolved concentrations of zinc and the speciation of Zn(2+), soil solution pH, total soil Zn, dissolved organic matter (DOM), soil organic matter (SOM) and the concentrations of different inorganic anions. The solid-liquid partitioning coefficient (K(d)) for Zn ranged from 17 to 13,100Lkg(-1) soil. The fraction of dissolved Zn bound to DOM varied from 60% to 98% and the soil solution free Zn(2+) varied from 40% to 60% of the labile Zn. Multiple regression equations to predict free Zn(2+), dissolved Zn and the solid-liquid partitioning of Zn are given for potential use in environmental fate modeling and risk assessment. The multiple regressions also highlight some of the most important soil properties controlling the solubility and chemical speciation of zinc in contaminated soils.     

Spain's greatest and most recent mine disaster

On 25 April 1998, the mineral waste retaining wall at the Swedish-owned pyrite mine at Aznalcóllar (Seville, Spain) burst, causing the most harmful environmental and socio-economic disaster in the history of the River Guadiamar basin. The damage was so great that the regional government decided in May 1998 to finance a comprehensive, multidisciplinary research initiative with the objective of eradicating or at least minimising all of the negative social, economic and environmental impacts. This paper utilises a Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis to identify eight strategic measures aimed at providing policymakers with key guidelines on implementing a sustainable development model, in a broad sense. Empirical evidence, though, reveals that, to date, major efforts to tackle the negative impacts have centred on environmental concerns and that the socio-economic consequences have not been completely mitigated.     

Investigations on the sorption of a toxaphene model congener, the B7-1450, on marine sediments

Sorption is a natural process that takes place in sediments or soils and changes the mobility and availability of hydrophobic organic compounds, such as toxaphene pesticide in the environment. The sorption of the 2-exo,3-endo,5-exo,8,9,10,10-heptachlorobornane (B7-1450), used as a model compound of the toxaphene heptachlorobornane congeners found in sediments, was investigated for the first time through a series of batch sorption experiments. The losses of B7-1450 due to adsorption onto glass walls and to evaporation occurring during analytical treatment steps were corrected. The study showed that these specific losses ranged from 2% to 3.5% for the glass walls adsorption and can be as high as 15% for the evaporation treatment. The sorption coefficients, K(d) and K(oc), of B7-1450 could be overestimated by >30%, particularly for low-concentration samples, if the losses were not corrected. Loss correction equations were established, validated and applied to determine sorption coefficients for the B7-1450 congener. The K(oc) values for B7-1450 determined over a gradient of concentrations ranged from 3.5x10(4) to 6.5x10(4)mlg(-1), revealing a strong affinity of B7-1450 for marine sediments.