Determination of BTEX by GC–MS in Air of Offset Printing Plants: Comparison between Conventional and Ecological Inks

The use of inks containing organic solvents by the offset printing process implies in the release of volatile organic compounds to the work environment. Many of these compounds such as benzene, toluene, ethylbenzene, and the xylene isomers (well known by the acronym BTEX) are extremely toxic. In this study, the BTEX concentrations were determined in two different printing plants that use distinct types of inks: the conventional and the so-called ecological, which is manufactured based on vegetal oil. Concentration ranges were 43–84, 15–3,480, 2–133, 5–459, and 2–236 μg m^?3 for benzene, toluene, ethylbenzene, m?+?p-xylene, and o-xylene, respectively, for the conventional printing plant. At the ecological printing plant, concentration ranges were below limit of detection (<LD)-31, <LD-618, <LD-1,690, <LD-10,500, <LD-3,360 μg m^?3 for benzene, toluene, ethylbenzene, m?+?p-xylene, and o-xylene, respectively. BTEX concentrations are lower at the ecological printing environment than in the conventional, where mineral oil-based inks are used. However, the worker who cleans the printing matrices is exposed to high concentrations of ethylbenzene and xylenes, due probably to the cleaning product’s composition (containing high amounts of BTEX). Although the BTEX concentrations found in both printing work environments were below the limits considered by the Brazilian Law for Activities and Unhealthy Operations (NR-15), the exposure to such vapors characterizes risk to the workers’ health for some of the evaluated samples, mainly the personal ones.     

Optimal planning for the sustainable utilization of municipal solid waste

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits.     

Feasibility of storing CO2 in the Utsira formation as part of a long term Dutch CCS strategy: An evaluation based on a GIS/MARKAL toolbox

This study provides insight into the feasibility of a CO₂ trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO₂. The feasibility is investigated in competition with CO₂ storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of a Dutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO₂ intensive industry. The results show that under the condition that a CO₂ permit price increases from €25 per tCO₂ in 2010 to €60 per tCO₂ in 2030, and remains at this level up to 2050, CO₂ emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO₂ is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO₂ would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO₂ from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO₂ from the Netherlands would have been stored in the Utsira formation by 2050. On the short term, CO₂ storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.     

An investigation of renewable resources and renewable technology applications in Bulgaria

A preliminary assessment of renewable energy resources in Bulgaria shows that these resources are significant on a national level. Terminology for total, accessible, and reserve resources is provided, and preliminary estimates for solar, wind, biomass, hydroelectric, and geothermal resources are given. The process used to make a first-level selection of renewable energy technologies for further evaluation is described and an initial ranking of technologies for electricity generation, industry, and buildings is provided.     

Notes on the dynamics and decomposition of leaves in a Nothofagus pumilio forest

A research project was conducted in a native forest of Nothofagus pumilio in one of the southernmost Chilean Nation Parks, Torres del Paine, to check the amount and timing of leaf fall, their decomposition rate and the respiration rate of the soil on an annual cycle.This paper also provides the results of the decay of fallen leaves in time, the loss curve of leaf weights, the evolution of water content and records of the larger taxonomic groups of microarthropods associated with the decomposition of the material.Research supported by the United Nations Project FP(4101-8301) PP(2314).     

Comprehensive study on dioxin contents in binder and anti-caking agent feed additives

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in some additives widely employed as binder and anti-caking agents in feedstuffs, such as kaolin, bentonite, zeolite, etc. with an special attention on sepiolite samples. Owing to their physico-chemical properties, the little information of these materials reported in the literature, the variability of PCDDs/PCDFs found in a preliminary evaluation and the absence of reference materials highlighted further research needed. Therefore, an extensive study on the analytical procedures based on the classical methods was performed with sepiolite samples. The study includes evaluation of reproducibility and repeatibility. To this end, a series of intra-day and nine inter-day analysis were made. The methodolgy was also assessed against the sample size and series of 12.5, 25, 37.5 and 50 g were analyzed. In all cases, the results confirmed good correlation with the parameters evaluated.     

Light Availability Prevails Over Soil Fertility and Structure in the Performance of Asian Knotweeds on Riverbanks: New Management Perspectives

Asian knotweeds (Fallopia spp.) are considered one of the world’s most invasive species. Restoring habitats dominated by these exotic species requires a better understanding of the importance of abiotic factors controlling the invasive knotweeds performance. We used observational data obtained on the embankment of the Isère River (France) to study the performance of Fallopia spp. under different soil, light, and disturbance conditions. On the Isère riverbanks, light intensity assessed by light quantity transmitted through canopy was the most important factor explaining the variability observed on knotweed performance expressed as above-ground biomass per square meter. Asian knotweeds were more productive under intensive light conditions. Alternatively other factors such as mowing (twice a year), soil fertility, soil texture, position on the bank or exposure to the sun had no significant effect on knotweed biomass production. We conclude that decreasing light resources, for example, by increasing competitive pressure on sites dominated by Asian knotweeds could be included in management plans to control the populations of this invasive taxon.