Anaerobic microbial dechlorination: an approach to on-site treatment of toxaphene-contaminated soil

Enhanced microbial degradation of toxaphene by natural microorganisms occurred in soil and sediment amended with organic matter kept under anaerobic (flooded) conditions. Laboratory experiments yielded a dissipation half-life of approximately 3 and 1 week for soil and sediment, respectively, containing 10 ppm of technical toxaphene and a 1% alfalfa meal amendment. Dissipation was accompanied by an increase in early eluting gas chromatographic peaks and a decrease in later eluting peaks, indicating that dechlorination had occurred. Enhanced anaerobic dissipation also took place in soil containing 500 ppm of toxaphene, although at a lesser rate than at 10 ppm, and when cotton gin waste was used as amendment in place of alfalfa meal. Sediment in a toxaphene-contaminated pesticide waste disposal ditch was amended with 10% steer manure and flooded to ascertain field utility of the technique for on-site decontamination. Toxaphene residues were reduced from 63 to 23 ppm in 120 days, and some degradation activity still occurred up to 8 months after this single treatment.     

Determination of sorbent point zero charge: usefulness in sorption studies

Potentiometric mass titration (PMT) technique has been adapted to determine the pH _pzc of four vegetable wastes: grape stalks, cork, yohimbe bark and olive stones wastes used for Cu(II) removal. The pH at the point zero charge (pH _pzc), determined by PMT, are compared with that obtained by two classical techniques: mass titration (MT) and immersion technique (IT). PMT has been found to be an easy and appropriate technique to determine pH _pzc of the studied materials. From the results, the knowledge of sorbents pH _pzc provides information about the possible attraction and repulsion between sorbent and sorbate but in any case enables to ensure that electrostatic force is one of the mechanisms that takes place in metal sorption.     

Enhancement of the anaerobic hydrolysis and fermentation of municipal solid waste in leachbed reactors by varying flow direction during water addition and leachate recycle

Poor performance of leachbed reactors (LBRs) is attributed to channelling, compaction from waste loading, unidirectional water addition and leachate flow causing reduced hydraulic conductivity and leachate flow blockage. Performance enhancement was evaluated in three LBRs M, D and U at 22 ± 3 °C using three water addition and leachate recycle strategies; water addition was downflow in D throughout, intermittently upflow and downflow in M and U with 77% volume downflow in M, 54% volume downflow in U while the rest were upflow. Leachate recycle was downflow in D, alternately downflow and upflow in M and upflow in U. The strategy adopted in U led to more water addition (30.3%), leachate production (33%) and chemical oxygen demand (COD) solubilisation (33%; 1609 g against 1210 g) compared to D (control). The total and volatile solids (TS and VS) reductions were similar but the highest COD yield (g-COD/g-TS and g-COD/g-VS removed) was in U (1.6 and 1.9); the values were 1.33 and 1.57 for M, and 1.18 and 1.41 for D respectively. The strategy adopted in U showed superior performance with more COD and leachate production compared to reactors M and D.     

Modelling local and synoptic scale influences on ozone concentrations in a topographically complex region of Southern Italy

A modelling study with the on-line coupled Eulerian chemical-weather model WRF/Chem for the Southern Italian region around Cosenza (Calabria) was conducted to identify the influences of synoptic scale meteorology, local scale wind systems and local emissions on ozone concentrations in this orographically complex region. Four periods of 5–7 days were chosen, one from each season, which had wind pattern characteristics representative of typical local climatological conditions, in order to study the local versus non-local impacts on ozone transport and formation. To account for the complex terrain, the horizontal resolution of the smallest modelling domain was 3 km. Model results were compared with measurements to demonstrate the capability of the model to reproduce ozone concentrations in the region. The comparison was favourable with a mean bias of ?1.1 ppb. The importance of local emissions on ozone formation and destruction was identified with the use of three different emission scenarios. Generally the influence of regional emissions on the average ozone concentration was small. However during periods when mountain-sea wind systems were well developed and synoptic scale winds were weak, the influence of local emissions from the urban area was at its greatest. The maximum influence of local emissions on ozone concentrations was 18 ppb.     

Predicting black smoke levels from deposit gauge and SO2 data to estimate long-term exposure in the United Kingdom, 1956–1961

BackgroundIn the UK air quality has been monitored systematically since 1914, providing valuable data for studies of the long-term trends in air pollution and potentially for studies of health effects of air pollutants. There are, however, challenges in interpreting these data due to changes over time in the number and location of monitored sites, and in monitoring techniques. Particulate matter was measured as deposited matter (DM) using deposit gauge monitors until the 1950s when black smoke (BS) filters were introduced. Estimating long-term exposure to particulates using data from both deposit gauge and BS monitors requires an understanding of the relationships between DM, SO₂ and BS.AimsTo explore whether DM and/or SO₂, along with seasonal and location specific variables can be used to predict BS levels.MethodsAir quality data were abstracted from hard copies of the monthly Atmospheric Pollution Bulletins for the period April 1956–March 1961 for any sites with co-located DM, SO₂ and BS data for three or more consecutive years. The relationships between DM, SO₂, and BS were assessed using mixed models.ResultsThere were 34 eligible sites giving 1521 triplets of data. There was a consistent correlation between SO₂ and BS at all sites, but the association between DM and BS was less clear and varied by location. Mixed modelling allowing for repeat measurements at each site revealed that SO₂, year, rainfall and season of measurement explained 72% of the variability in BS levels.ConclusionsSO₂ can be used as a surrogate measure for BS in all monitoring locations. This surrogate can be improved upon by consideration of site specific characteristics, seasonal effects, rainfall and year of measurement. These findings will help in estimating historic, long-term exposure to particulates where BS or other measures are not available.     

Reviewing the carbon footprint analysis of hotels: Life Cycle Energy Analysis (LCEA) as a holistic method for carbon impact appraisal of tourist accommodation

This study discusses the potential for Life Cycle Assessment (LCA) to be utilized for the environmental assessment of tourism accommodation facilities, and their contribution to global carbon footprint. To demonstrate the viability of employing LCA in the hotel sector, its simplified derivative, Life Cycle Energy Analysis (LCEA), is applied to two tourism accommodation facilities in Poole, Dorset (UK) to quantify their CO₂ emissions. The results indicate that the reviewed hotels are less energy and carbon-intense than the tourism accommodation establishments reported in the literature. This may indirectly imply the continuous progress of hotel’s energy efficiency over time. The implications of the current energy use practices in the reviewed hotels are discussed and suggestions are made on how to further improve the energy performance and therefore cut the carbon footprint. Recommendations for hotel management and policy-making are developed to reduce the energy and carbon intensity of the hotel industry. A method for energy and carbon footprint analysis of outsourced laundries and breakfast services is also proposed.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.