Multi-GCM projections of future drought and climate variability indicators for the Mediterranean region

Future climate conditions for the Mediterranean region based on an ensemble of 16 Global Climate Models are expressed and mapped using three approaches, giving special attention to the intermodel uncertainty. (1) The scenarios of mean seasonal temperature and precipitation agree with the projections published previously by other authors. The results show an increase in temperature in all seasons and for all parts of the Mediterranean with good intermodel agreement. Precipitation is projected to decrease in all parts and all seasons (most significantly in summer) except for the northernmost parts in winter. The intermodel agreement for the precipitation changes is lower than for temperature. (2) Changes in drought conditions are represented using the Palmer Drought Severity Index and its intermediate Z-index product. The results indicate a significant decrease in soil moisture in all seasons, with the most significant decrease occurring in summer. The displayed changes exhibit high intermodel agreement. (3) The climate change scenarios are defined in terms of the changes in parameters of the stochastic daily weather generator calibrated with the modeled daily data; the emphasis is put on the parameters, which affect the diurnal and interdiurnal variability in weather series. These scenarios indicate a trend toward more extreme weather in the Mediterranean. Temperature maxima will increase not only because of an overall rise in temperature means, but partly (in some areas) because of increases in temperature variability and daily temperature range. Increased mean daily precipitation sums on wet days occurring in some seasons, and some parts of the Mediterranean may imply higher daily precipitation extremes, and decreased probability of wet day occurrence will imply longer drought spells all across the Mediterranean.     

Episode control criteria and strategy for carbon monoxide

With respect to health effects and types of emission sources, carbon monoxide is different from SO₂ and airborne participates. The effects of nontoxic CO levels are temporary and reversible. The primary sources are automobiles and trucks, and concentrations are often highly localized. Episode control strategies developed for other pollutants are not applicable for coping with CO episodes.     

Cooling Towers and the Environment

Measurements of natural draft cooling tower plume behavior, as well as meteorological variables, were obtained from aircraft flights near major power plants of the American Electric Power System. Persistence of the visible plume to great distances depends essentially on ambient humidity. Atmospheric stability at plume elevation was also important. Cooling tower-induced fog at ground-level was never observed in any of the tests, and aerodynamic downwash of the visible plume was absent also. The cooling towers did cause modification of natural clouds and they occasionally shadowed some local areas from the sun. Merging of the stack and cooling tower plumes was a common occurrence.     

Pollutant Removal from Wood and Coal Flue Gases by Soil Treatment

If many homeowners convert to solid fuels for heating, residential flue gases will be a large source of air pollution. Control of this pollution requires an inexpensive, reliable, and effective method of flue gas treatment. One such method is to force flue gases through soil beds. Such soil treatment removes all detectable smoke, odor, and polynuclear organic matter (POM), up to 97% of the CO, and at least 97% of the SO₂ from flue gases of wood and coal combustion. The technique is low cost, reliable, almost maintenance-free, and also appears suitable for other small point sources of air pollution.     

Emission Impacts of Electric Vehicles

Alternative vehicular fuels are proposed as a strategy to reduce urban air pollution. In this paper, we analyze the emission Impacts of electric vehicles In California for two target years, 1995 and 2010. We consider a range of assumptions regarding electricity consumption of electric vehicles, emission control technologies for power plants, and the mix of primary energy sources for electricity generation. We find that, relative to continued use of gasoline-powered vehicles, the use of electric vehicles would dramatically and unequivocally reduce carbon monoxide and hydrocarbons. Under most conditions, nitrogen oxide emissions would decrease moderately. Sulfur oxide and particulate emissions would Increase or slightly decrease. Because other areas of the United States tend to use more coal in electricity generation and have less stringent emission controls on power plants, electric vehicles may have less emission reduction benefits outside California.     

Site Sampling and Treatability Studies for Demonstration of WasteChem’s Asphalt Encapsulation Technology Under EPA’s SITE Program

ABSTRACT

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5μm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals.

Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors.

This paper describes a preliminary research effort to develop a methodology for the measurement of nonvi-able biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 um were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 um is evidence of fragmentation of larger source particles that are known allergens.     

Solvent Extraction Processes: A Survey of Systems in the SITE Program

Solvent extraction of contaminated soils, sludges and sediments has been successfully completed at a number of Superfund sites. Each commercialized process uses a unique operating system to extract organic contaminants from solids. These operating systems may be classified by the properties of the solvents each utilizes: (1) standard solvents, (2) near-critical fluids/liquified gases, and (3) critical solution temperature solvents. Pretreatment and post-treatment requirements vary depending upon the operating systems of the solvent extraction system. Future demonstrations of these technologies by the U.S. EPA’s Superfund Innovative Technology Evaluation Program will provide additional information regarding the efficacy of these processes.     

Method Comparisons for Particulate Nitrate,Elemental Carbon,and PM2.5 Mass in Seven U.S. Cities

ABSTRACT

Methods that measure PM₂₅ mass, total particulate NO₃ ^-, and elemental carbon (EC) were evaluated in seven U.S. cities from 1997 to 1999. Sampling was performed in Bakersfield, CA; Boston, MA; Chicago, IL; Dallas, TX; Philadelphia, PA; Phoenix, AZ; and Riverside, CA. Evaluating and validating methods that measure the components of fine mass are important to the effort of establishing a speciation-monitoring network. The Harvard Impactor (HI), which measures fine particle mass, showed excellent agreement (r² = 0.99) with the PM₂₅ Federal Reference Method (FRM) for 81 24-hr samples in Riverside and Bakersfield. The HI also showed good precision (4.8%) for 243 24-hr collocated samples over eight studies.

The Aethalometer was employed in six of the sampling locations to measure black carbon (BC). These values were compared to EC as measured from a quartz filter using thermal analysis. For the six cities combined, the two methods were highly correlated (r² = 0.94; 187 24-hr samples); however, the BC values were approximately 24% less than the EC measurements consistently across all six cites. This compares well to results observed for EC/BC measurements observed in other semi-urban areas. Par-ticulate NO₃ ^- was measured using the Harvard-EPA Annular Denuder System (HEADS). This was compared to the NO₃ ^- measured from the HI Teflon (DuPont) filter to assess NO₃ ^- artifacts. Significant NO₃ ^- losses (approximately 50% of total NO₃ ^-) were found in Riverside, Philadelphia, and Boston, while minimal artifacts were observed in the other sites. Two types of HEADS configurations were employed in five cities. One system used a Na₂CO₃-coated glass fiber filter, and the other type used a nylon filter to collect volatilized NO₃ ^- from the Teflon filter. The HEADS with the Na₂CO₃-coated filter consistently underestimated the total particulate NO₃ ^- by approximately 20% compared to the nylon HEADS.     

Perfluoroalkyl carboxylates and sulfonates and precursors in relation to dietary source tracers in the eggs of four species of gulls (Larids) from breeding sites spanning Atlantic to Pacific Canada

In the present study, we identified and examined the spatial trends, sources and dietary relationships of bioaccumulative perfluorinated sulfonate (PFSA; C(6), C(8), and C(10) chain lengths) and carboxylate (PFCA; C(6) to C(15) chain lengths) contaminants, as well as precursor compounds including several perfluorinated sulfonamides, and fluorotelomer acids and alcohols, in individual eggs (collected in 2008) from four gull species [glaucous-winged (Larus glaucescens), California (Larus californicus), ring-billed (Larus delawarensis) and herring (Larus argentatus) gulls] from 15 marine and freshwater colony sites in provinces across Canada. The pattern of PFSAs was dominated by perfluorooctane sulfonate (PFOS; >89% of ΣPFSA concentration) regardless of egg collection location. The highest ΣPFSA concentrations were found in the eggs collected in the urbanized areas in the Great Lakes and the St. Lawrence River area [Big Chicken Island 308 ng/g ww, Toronto Harbour 486 ng/g ww, and Ile Deslauriers (HG) 299 ng/g ww]. Also, eggs from all freshwater colony sites had higher ΣPFSA concentrations, which were significant (p<0.05) in many cases, compared to the marine sites with the exception of the Sable Island colony in Atlantic Canada off the coast of Nova Scotia. C(6) to C(15) chain length PFCAs were detected in the eggs, although the pattern was variable among the 15 sites, where PFUnA and PFTrA dominated the pattern for most colonies. Like the ΣPFSA, the highest concentrations of ΣPFCA were found in the eggs from Big Chicken Island, Toronto Harbour, Ile Deslauriers (HG), and Sable Island, although not all freshwater sites had higher concentrations compared to marine sites. Dietary tracers [δ(15)N and δ(13)C stable isotopes (SIs)] revealed that PFSA and PFCA exposure is colony dependent. SI signatures suggested that gulls from most marine colony sites were exposed to PFCs via marine prey. The exception was the Mandarte Island colony in Pacific British Columbia, where PFSA and PFCA exposure appeared to be via terrestrial and/or freshwater prey consumption. The same was true for the freshwater sites where egg SIs suggested both aquatic and terrestrial prey consumption as the source for PFC exposure depending on the colony. Both aquatic (marine and freshwater) and terrestrial prey are likely sources of PFC exposure to gulls but exposure scenarios are colony-specific.     

Parameters of well-being and subjective health and their relationship with residential traffic noise exposure--a representative evaluation in Switzerland

In the present paper, the associations between residential traffic noise exposure from the noise sources--road, rail and aircraft--and self-reported indicators of health and well-being are investigated in a representative sample of the Swiss population. The study is based on record linkage of the Swiss GIS Noise Database (SonBase) and the Swiss Household Panel (SHP), a large panel survey with more than 10,000 respondents all over the country. A range of exposure-effect relationships of noise exposure and parameters of health and well-being such as self-reported health status, satisfaction with health, sleep disturbances, the intensity of the wish to move from the current residence as well as the awareness of "noise problems" at the place of living were investigated. Both unadjusted as well as models that controlled for age, sex, socioeconomic status, degree of urbanization at the place of residence, and personal living conditions were developed. A contribution of residential noise exposure as regards subjective estimates of health cannot been ruled out, but must be put into perspective as the effects of exposure measures were of rather small magnitude, especially compared to well-established determinants of health. Against the background of the explanatory power of classic health predictors, the present analyses allow one to gage the contribution of residential noise exposure on subjective health outcomes from a more general, integral point of view.