Rollover injury: effects of near- and far-seating position, belt use, and number of quarter rolls

PURPOSE: Vehicle and occupant responses in rollovers are complex since many factors influence both. This study analyzes the following factors: 1) belt use, 2) seated position with respect to the lead side in the rollover, 3) another front occupant in the crash, and 4) number of quarter rolls. The aim was to improve our understanding of rollover injury mechanisms. METHOD: Rollover accidents were analyzed using 1992-2004 NASS-CDS data. The sample included adult drivers and right-front passengers. All occupants were evaluated and then a subset of non-ejected occupants was analyzed. Using roll direction and seating position, the sample was divided into near- and far-seated occupants. Injury and fatality risks were determined by seatbelt use, occupancy, rollover direction, and number of quarter rolls. Risk was defined as the number of injured (e.g., MAIS 3+) divided by the number of exposed occupants (MAIS 0-6). Significance in differences was determined. A matched-pair analysis was used to determine the risk of serious injury for near- and far-seated occupants who were either belted or unbelted in the same crash. RESULTS: For all occupants, serious injury risks were highest for far-seated, unbelted occupants at 18.1% +/- 4.8%, followed by near-seated unbelted occupants at 12.0% +/- 3.5%. However, the difference was not statistically significant. Belted near- and far-seated occupants had a similar injury risk of 4.3% +/- 1.2% and 4.0% +/- 1.2%, respectively. For non-ejected occupants, serious injury risk was 9.5% +/- 3.2% for far-seated unbelted occupants and 4.9% +/- 2.1% for near-seated unbelted occupants, not a statistically significant difference. Serious injury risk was similar for belted near- and far-seated non-ejected occupants, at 3.6% +/- 1.1%. Seatbelts were 64.2%-77.9% effective in preventing serious injury for all occupants and 62.1%-26.5% for far- and near-seated, non-ejected occupants, respectively. Based on the matched pairs, seatbelts were less effective for near-seated (5.0%) compared to far-seated (2.8%) occupant MAIS 3+F risks. This was similar for non-ejected occupants. An unbelted near-seated occupant increased the risk for a belted far-seated occupant by 2.2 times, whereas an unbelted far-seated occupant increased the risk for a belted near-seated occupant by 10.2 times. For all occupants, the risk of serious injury increased with the number of quarter rolls, irrespective of seated position. For near-seated occupants, seatbelt effectiveness was higher in < or =1 roll than 1+ roll, at 72.3% compared to 28.3%. For far-seated occupants, seatbelt effectiveness was similar in < or =1 and 1+ roll samples at 78.3% and 76.8%, respectively. Near-seated occupants had the lowest serious injury risk when they were the sole occupant in the vehicle. This was also true for non-ejected occupants. However, far-seated occupants had a lower injury risk when another occupant was involved in the crash. CONCLUSIONS: The effect of carrying another occupant appears to reduce the risk of serious injury to far-seated occupants. However, near-seated occupants are better off being the sole occupant in the vehicle. Seatbelt effectiveness was lowest at 28.3% for non-ejected, near-seated occupants in 1+ rolls. This finding deserves further evaluation in an effort to improve seatbelt effectiveness in rollovers. For belted drivers alone in a rollover, fatality risks are 2.24 times higher for the far- versus near-seated position. Analysis of rollovers by quarter turns indicates that occupants are both far-side and near-side in rollovers. The extent to which this confounds the relationship between roll direction, seating position, and injury risk is unknown.     

Gender and career success: A typology and analysis of dual paradigms

Despite women's advancements in the workplace, gender inequality persists. We classify and test two frameworks used to explain gender differences in career success: unequal attributes and unequal effects. The unequal attributes framework suggests that gender is related to other attributes, which result in unequal career outcomes for men and women (i.e., a mediated effect). The unequal effects framework suggests that even when men and women share the same attribute or circumstances, they are rewarded differently, such that individual attributes have unequal effects on career outcomes for men and women (i.e., a moderated effect). We collected survey data from a gender‐balanced sample of 394 business school alumni. Using structural equation modeling to test the unequal attributes framework, we found that work hours, career orientation, having a nonemployed spouse, and working in a predominantly female job were unequal attributes that explained gender differences in career success. Using multigroup path analysis to examine unequal effects, we found that being agentic, married, having children at home, and working in a predominantly female workplace had unequal effects in relation to career success for men and women. We find support for both models across three categories of career success antecedents (i.e., personal, family, and job attributes).     

Attribution theory: An introduction to the special issue

This special issue of the Journal of Organizational Behavior was developed to further extend attribution theory and its application to the field of organizational behavior. In this introduction, we provide a brief overview of the motivation for this special issue, a concise summary of the papers included in it, a discussion about progress toward the field's goals, and suggestions for how future research can move the field forward. In doing so, we describe how applying attribution theory to studies that utilize a broad range of study designs, research contexts, and focal topics results in insights that enhance our understanding of how attributional processes predict and explain individuals' emotions and behaviors. We also provide suggestions for how to further develop attribution theory so we can more clearly describe the generalizability of relationships across a wide variety of organizational contexts.     

Nonequilibrium transport of organic chemicals: The impact of pore-water velocity

The impact of variations in pore-water velocity on the nonequilibrium sorption and transport of organic chemicals was investigated. Miscible displacement experiments were performed with four organic chemicals (dichlorobenzene, naphthalene, tetrachloroethene and p-xylene) and three aquifer materials having low organic-carbon contents (0.02–0.1%). The results of the experiments were analyzed by using a one-dimensional advective-dispersive transport model, wherein sorption is considered instantaneous for a fraction of the sorbent and rate-limited for the remainder. An inverse relationship between the reverse sorption rate constant and the equilibrium sorption constant was evident for each of two velocities. However, there was an order-of-magnitude difference between the rate constants obtained at the two velocities. This suggests the existence of a time-scale effect, which must be accounted for when modeling the transport of organic solutes.     

Potential role of fire retardant-treated polyurethane foam as a source of brominated diphenyl ethers to the US environment

Five tetra- to hexabrominated diphenyl ether (BDE) congeners (BDE-47, -99, -100, -153 and -154) are the most frequently reported in wildlife and humans. The commercial penta-BDE product, used predominantly to flame-retard polyurethane foam, consists primarily of these same congeners. In 1999, North American demand accounted for 98% of the total global penta-market of 8500 metric tons. Frogs, housed with flame retardant-treated polyurethane foam as a dry substrate, accumulated 10,100 microg/kg (wet weight) of the above BDEs. Crickets kept therein as food contained 14,400 microg/kg. The crickets are believed to have browsed directly on the foam and, in turn, were consumed by the frogs. BDE congener composition in all three matrices matched that of the penta-commercial product. Similar congeners were also observed in soil and stream sediments collected near a polyurethane foam manufacturing plant. Summed concentrations of BDE-47, -99 and -100, the dominant congeners observed in these samples, ranged from < 1 to 132 microg/kg (dry weight basis). Sunfish fillets obtained from a nearby, off-site pond contained a total of 624 microg/kg (lipid basis). Sewage treatment plant (STP) sludge exhibited these same congeners at 1370 microg/kg (dry weight). BDE-209, the fully brominated congener predominant in the commercial deca-BDE product, was also present at 1470 microg/kg. While no known polyurethane foam manufacturers discharged to this plant, the distribution pattern of the low brominated congeners in the sludge matched that of the penta-product. After four weeks of exposure to ambient outdoor conditions, the surface of flame-retarded polyurethane foam became brittle and began to disintegrate. Subsequent dispersal of these penta-containing foam fragments may be one mechanism by which these BDEs reach the environment.     

Uptake of heavy metals and As by Brassica juncea grown in a contaminated soil in Aznalcóllar (Spain): the effect of soil amendments

Two crops of Brassica juncea (L.) Czern. were grown in a field experiment, at the site affected by the toxic spillage of acidic, metal-rich waste in Aznalcóllar (Seville, Spain), to study its metal accumulation and the feasibility of its use for metal phytoextraction. The effects of organic soil amendments (cow manure and mature compost) and lime on biomass production and plant survival were also assessed; plots without organic amendment and without lime were used as controls. Plots, with or without organic amendment, having pH < 5 were limed for the second crop. Soil acidification conditioned plant growth and metal accumulation. The addition of lime and the organic amendments achieved higher plant biomass production, although effects concerning metal bioavailability and accumulation were masked somewhat by pH variability with time and between and within plots. Tissue metal concentrations of B. juncea were elevated for Zn, Cu and Pb, especially in leaves of plants from plots with low pH values (maxima of 2029, 71 and 55 microg g(-1), respectively). The total uptake of heavy metals in the plants was relatively low, emphasising the problems faced when attempting to employ phytoextraction for clean-up of pluri-contaminated sites.     

Influence of hydroxypropyl-beta-cyclodextrin (HPCD) on the bioavailability and biodegradation of pyrene

It is well known that the limited aqueous solubilities of polycyclic aromatic hydrocarbons (PAH) often reduce their bioavailability to bacterial populations. The objective of this study was to test the impact of a solubility-enhancement reagent, hydroxypropyl-beta-cyclodextrin (HPCD), on the bioavailability and biodegradation of pyrene. No measurable loss of pyrene occurred for the control vials throughout the first 22 weeks of the experiment, indicating the absence of mass loss via abiotic transformation and volatilization. The vials containing pyrene and the degrader isolate (Burkholderia CRE 7), but no HPCD, also exhibited no measurable loss of pyrene throughout the experiment. Conversely, biodegradation of pyrene appears to have been initiated after approximately 15 weeks for the vials containing 10(4) mg l(-1) HPCD. By the end of the experiment, approximately 14% (w/w) of the pyrene was biodegraded in the presence of HPCD. These results indicate that HPCD may be useful for enhancing the bioavailability and biodegradation of pyrene and other PAHs.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 2. Inactivation of pathogens and indicator organisms in a continuous-flow reactor followed by batch treatment.

Thermophilic-anaerobic digestion in a single-stage, mixed, continuous-flow reactor is not approved in the United States as a process capable of producing Class A biosolids for land application. This study was designed to evaluate the inactivation of pathogens and indicator organisms in such a reactor followed by batch treatment in a smaller reactor. The combined process was evaluated at 53 degrees C with sludges from three different sources and at 51 and 55 degrees C with sludge from one of the sources. Feed sludge to the continuous-flow reactor was spiked with the pathogen surrogates Ascaris suum and vaccine-strain poliovirus. Feed and effluent were analyzed for these organisms and for indigenous Salmonella spp., fecal coliforms, Clostridium perfringens spores, and somatic and male-specific coliphages. No viable Ascaris eggs were observed in the effluent from the continuous reactor at 53 or 55 degrees C, with greater than 2-log removals across the digester in all cases. Approximately 2-log removal was observed at 51 degrees C, but all samples of effluent biosolids contained at least one viable Ascaris egg at 51 degrees C. No viable poliovirus was found in the digester effluent at any of the operating conditions, and viable Salmonella spp. were measured in the digester effluent in only one sample throughout the study. The ability of the continuous reactor to remove fecal coliforms to below the Class A monitoring limit depended on the concentration in the feed sludge. There was no significant removal of Clostridium perfringens across the continuous reactor under any condition, and there also was limited removal of somatic coliphages. The removal of male-specific coliphages across the continuous reactor appeared to be related to temperature. Overall, at least one of the Class A pathogen criteria or the fecal coliform limit was exceeded in at least one sample in the continuous-reactor effluent at each temperature. Over the range of temperatures evaluated, the maximum time required to meet the Class A criteria by batch treatment of the continuous-reactor effluent was 1 hour for Ascaris suum and Salmonella spp. and 2 hours for fecal coliforms.     

Migrating an incident reporting system to a CCPS process safety metrics model

A major chemical company established a formal incident investigation and reporting system several years ago. The original system focused heavily on worker-related injuries, illnesses, and near-misses and was used primarily to track statistics reportable to the Occupational Safety and Health Administration (OSHA). This Occupational Injury and Illness (OII) approach has been recognized to be an ineffective tool for measuring, predicting, and preventing process safety incidents. The Center for Chemical Process Safety (CCPS) recently published guidelines on how to establish safety metrics for the measurement and reduction of process safety incidents. The process safety metrics approach relies upon leading and lagging metrics to improve organization process safety. This paper is a case study of the analysis of one organization’s incident database, which represents approximately five years of data from over a dozen facilities. The aim of this investigation was to extract useful process safety metrics from the incident investigation and reporting system, which would be pertinent to the types of process units and process functions at these facilities. This paper will discuss the approach taken to extract process incident information from an OII-based database and present the difficulties of performing an analysis on such a database. This paper provides guidance on how to migrate an existing OII-based reporting system to a program that includes process safety metrics in accordance with industry best practices.     

Prevalence of alcohol-impaired driving and riding in northern Ghana

Objective: The objective of this study was to determine the roadside prevalence of alcohol-impaired driving among drivers and riders in northern Ghana. The study also verifies motorists' perceptions of their own alcohol use and knowledge of the legal blood alcohol concentration (BAC) limit in Ghana.

Method: With the assistance of police, systematic random sampling was used to collect data at roadblocks using a cross-sectional study design. Breathalyzers were used to screen whether motorists had detectable alcohol in their breath and follow-up breath tests were conducted to measure the actual breath alcohol levels among positive participants.

Results: In all, 9.7% of the 789 participants had detectable alcohol, among whom 6% exceeded the legal BAC limit of 0.08%. The prevalence of alcohol-impaired driving/riding was highest among cyclists (10% of all cyclists breath-tested) followed by truck drivers (9%) and motorcyclists (7% of all motorcyclists breath-tested). The occurrence of a positive BAC among cyclists was about 8 times higher (odds ratio [OR] = 7.73; P < .001) and it was 2 times higher among motorcyclists (OR = 2.30; P = .039) compared to private car drivers. The likelihood for detecting a positive BAC among male motorists/riders was higher than that among females (OR = 1.67; P = .354). The odds for detecting a positive BAC among weekend motorists/riders was significantly higher than on weekdays (OR = 2.62; P = .001).

Conclusion: Alcohol-impaired driving/riding in Ghana is high by international standards. In order to attenuate the harmful effects of alcohol misuse such as alcohol-impaired driving/riding, there is the need to educate road users about how much alcohol they can consume and stay below the legal limit. The police should also initiate random breath testing to instill the deterrence of detection, certainty of apprehension and punishment, and severity and celerity of punishment among drink-driving motorists and riders.