Catalytic gasification of tars from a dumping site

The work deals with catalytic gasification, pyrolysis and non-catalytic gasification of tar from an industrial dumping site. All experiments were carried out in a vertical stainless steel gasification reactor at 800 °C. Crushed calcined dolomite was used as the gasification catalyst. Parameters such as addition of water and air, and the influence of the catalyst in regard to the composition of the process gas were investigated. The catalytic gasification experiment in the steady state produced process gas with the composition: 56 % of H₂, 9 % of CO, 11 % of CH₄ and 12 % of CO₂ (mol.%). Concentration of the C₂ fraction was lower than 1 mol.%. Volume flow of air was later changed from 120 to 230 ml min^?1 reducing the amount of hydrogen to 51 mol.% and that of methane to 10 mol.%. Process gas created in a non-catalytic gasification process contained 26–30 mol.% of methane, 13–15 mol.% of carbon monoxide and 15–17 mol.% of the C₂ fraction and lower amounts of hydrogen (20 mol.%) and carbon dioxide (2–3 mol.%). The highest apparent conversion of tar was reached in the catalytic gasification processes. A higher rate of catalyst deactivation can be observed when water or air is not added.     

Formation of PFOA from 8:2 FTOH in closed-bottle experiments with brackish water

The formation of perfluorooctanoate (PFOA) from 1H,1H,2H,2H-perfluorodecanol (8:2 FTOH) was studied for the first time in laboratory experiments with brackish water. The water samples were collected from the Baltic Sea, which is one of the largest brackish water areas in the world and is polluted with PFOA and other perfluorinated compounds. The formation of PFOA was studied in closed-bottle experiments at different water temperatures. As a reference experiment, a modified OECD 310 test was conducted with sludge from a wastewater treatment plant and with brackish water. The PFOA and 8:2 FTOH were concentrated from water samples by solid-phase extraction (SPE) and were analysed using liquid chromatography–mass spectrometry. The effect of oxygen concentration on the formation of PFOA was studied using surface water samples with high and low oxygen contents. Other experiments were performed with oxygen-rich surface water and oxygen-deficient bottom water. The formation of PFOA was observed in all experiments; it was higher in the trial performed with brackish water than in the reference test carried out with sludge. Clear temperature dependence was observed in the formation of PFOA in brackish water tests; after a 30-day test period, a sixfold increase was observed in the amount of PFOA in surface water between the temperatures of 15 and 20 °C. Microbes were suggested as the major cause of the formation of PFOA, but other environmental characteristics, such as oxygen, could also affect the formation potential of PFOA.     

Genotoxic potential of selected cytostatic drugs in human and zebrafish cells

Due to their increasing use, the residues of anti-neoplastic drugs have become emerging pollutants in aquatic environments. Most of them directly or indirectly interfere with the cell’s genome, which classifies them into a group of particularly dangerous compounds. The aim of the present study was to conduct a comparative in vitro toxicological characterisation of three commonly used cytostatics with different mechanisms of action (5-fluorouracil [5-FU], cisplatin [CDDP] and etoposide [ET]) towards zebrafish liver (ZFL) cell line, human hepatoma (HepG2) cells and human peripheral blood lymphocytes (HPBLs). Cytotoxicity was determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and acridine orange/ethidium bromide staining. All three drugs induced time- and dose-dependent decreases in cell viability. The sensitivity of ZFL and HepG2 cells towards the cytotoxicity of 5-FU was comparable (half maximal inhibitory concentration (IC₅₀) 5.3 to 10.4 μg/mL). ZFL cells were more sensitive towards ET- (IC₅₀ 0.4 μg/mL) and HepG2 towards CDDP- (IC₅₀ 1.4 μg/mL) induced cytotoxicity. Genotoxicity was determined by comet assay and cytokinesis block micronucleus (CBMN) assay. ZFL cells were the most sensitive, and HPBLs were the least sensitive. In ZFL cells, induction of DNA strand breaks was a more sensitive genotoxicity endpoint than micronuclei (MNi) induction; the lowest effective concentration (LOEC) for DNA strand break induction was 0.001 μg/mL for ET, 0.01 μg/mL for 5-FU and 0.1 μg/mL for CDDP. In HepG2 cells, MNi induction was a more sensitive genotoxicity endpoint. The LOEC values were 0.01 μg/mL for ET, 0.1 μg/mL for 5-FU and 1 μg/mL for CDDP. The higher sensitivity of ZFL cells to cytostatic drugs raises the question of the impact of such compounds in aquatic ecosystem. Since little is known on the effect of such drugs on aquatic organisms, our results demonstrate that ZFL cells provide a relevant and sensitive tool to screen genotoxic potential of environmental pollutant in the frame of hazard assessment.     

Biomonitoring of heavy metals in fish from the Danube River

The Croatian part of the Danube River extends over 188 km and comprises 58 % of the country’s overall area used for commercial freshwater fishing. To date, the heavy metal contamination of fish in the Croatian part of the Danube has not been studied. The main purpose of this study was to determine heavy metal levels in muscle tissue of sampled fish species and to analyze the measured values according to feeding habits of particular groups. Lead ranged from 0.015 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in herbivorous fish, cadmium from 0.013 μg^?1 dry weight in herbivorous to 0.018 μg^?1 dry weight in piscivorous fish, mercury from 0.191 μg^?1 dry weight in omnivorous to 0.441 μg^?1 dry weight in planktivorous fish and arsenic from 0.018 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in omnivorous fish. Among the analyzed metals in muscle tissue of sampled fish, only mercury exceeded the maximal level (0.5 mg kg^?1) permitted according to the national and EU regulations determining maximum levels for certain contaminants in foodstuffs, indicating a hazard for consumers of fish from the Danube River.     

波罗的海地区地方级可持续政策:波罗的海城市联盟网中的地方21世纪议程

"地方21世纪议程"(LA21)有两个主要目标.①在本研究论文中的一些经验证据的基础上,首要目标是改进民主(环境)决策程序,以便使大多数人能够参与规划和决策,并能够了解这些决策的重大意义.②LA2l程序寻求以既考虑地方的情况又考虑全球情况的方式改善(至少间接地)当地广义的环境状况.本文的第一部分探讨了LA21的概念与方法并阐明对于波罗的海LA2l非常重要的不同的行动领域.此外,研究论文还将描述和展示在一个城市网,即波罗的海城市联盟(uBC)范围内的LA2l形势.包括传递信息、模型及观念的联网是将LA2l理念传播到特别是新近民主化的社会的一个主要手段.最后,本文将对波罗的海边缘的LA2l形势作一全面的评价.     

Recombinant luminescent bacterial sensors for the measurement of bioavailability of cadmium and lead in soils polluted by metal smelters

Environmental hazard of heavy metals in soils depends to a large extent on their bioavailability. The approach used in this study enables the determination of bioavailable metals in solid-phase samples. Two recombinant bacterial sensors, one responding specifically to cadmium and the other to lead and cadmium by increase of luminescence (firefly luciferase was used as a reporter) were used to determine the bioavailability of these metals in soil-water suspensions (a contact assay) and respective particle-free extracts. Fifty agricultural soils sampled near zinc and lead smelters in the Northern France containing up to (mg/kg) 20.1 of Cd, 1050 of Pb and 1390 of Zn were analysed. As the soil matrix interferes with the assay, recombinant luminescent control bacteria lacking the metal recognizing protein and corresponding promoter (thus, being not metal-inducible) but otherwise comparable to the sensor bacteria (the same host bacterium and plasmid encoding luciferase) were used in parallel to take into account the possible quenching and/or stimulating effects of the sample on the luminescence of the sensor bacteria. Both, chemical and sensor analysis showed that only microg/l levels of metals were extracted from the soil into the water phase (0.1% of the total Cd, 0.07% of Pb and 0.5% of Zn). However, 115-fold more Cd and 40-fold more Pb proved bioavailable if the sensor bacteria were incubated in soil suspensions (i.e., in the contact assay). The bioavailability of metals in different soils varied (depending probably on soil type) ranging from 0.5% to 56% for cadmium and from 0.2% to 8.6% for lead.     

Bioluminescent yeast assays for detecting estrogenic and androgenic activity in different matrices

In this paper we describe the construction and use of a set of bioluminescent yeast strains for the detection of compounds that can affect androgen or estrogen receptor mediated hormonal signalling. The set includes Saccharomyces cerevisiae strains expressing human androgen receptor (AR), estrogen receptor alpha (ERalpha) or estrogen receptor beta (ERbeta), along with firefly luciferase controlled by a respective hormone responsive promoter. A constitutively luminescent strain was included in the set for determining the cytotoxicity of the sample. Yeast cells were incubated with pure chemicals or complex samples for 2.5 h, after which the signal could be detected from the cell-sample mixture after simply adding the D-luciferin substrate. The assays could be completed in one day and they required no cell lysis or centrifugation steps, which makes them suitable for high-throughput analysis of samples. Due to a short incubation time the assays are directly applicable to different sample matrices, requiring no pretreatment of the samples. The assays were used to assess the hormonal activity in moisturizing lotions as an example of a complex sample matrix known to contain endocrine disrupting chemicals. Six out of eight tested moisturisers showed high estrogenic activity, whereas no androgenic activity was observed in the samples.     

Impact of aquacultures on the marine ecosystem: Modelling benthic carbon loading over variable depth

In order to be used within Environmental Impact Assessment study, we have developed a three-dimensional particle tracking model for prediction of benthic carbon loading (BCL) caused by fish farms. The model is based on stochastic differential equations for particle transport consistent with the well-known semi-empirical advection/diffusion equation. It requires only easily obtainable input data in the form of measured current record, the source location and a specification of local bathymetry. The model accounts for advection by long-term residual and tidal currents, turbulent diffusion, realistic bathymetry and variations in daily (monthly or yearly) emissions from fish farm.Here, we concentrate on the changes in sedimentation pattern caused by various bathymetric shapes. Examination of idealized cases reveals where and why we can expect the worst impact on benthic communities. For future reference, these results will be included into guidelines for fish farming.     

Transport and Diffusion of Ozone in the Nocturnal and Morning Planetary Boundary Layer of the Phoenix Valley

The evolution of ozone (O ₃) in the nocturnal and morning-transitional planetary boundary layer (PBL) of the Phoenix valley was measured as a part of the `Phoenix Sunrise Experiment 2001' of the U.S. Department of Energy conducted in June 2001. The goal of the field program was to study the transport, distribution and storage of ozone and its precursors in the urban boundary layer over a diurnal cycle. The ground level O <sub>3</sub> as well as mean meteorological variables and turbulence were measured over the entire period, and vertical profiling (using a tethered balloon) was made during the morning transition period. Approximately half of the observational days showed the usual diurnal cycle of high O <sub>3</sub> during the day and low O <sub>3</sub> at night, with nitrogen oxides (NO <sub>x</sub> = NO <sub>2</sub> + NO) showing an out of phase relationship with O <sub>3</sub>. The rest of the days were signified by an anomalous increase of O <sub>3</sub> in the late evening ( 2200 LST), concomitant with a sudden drop of temperature, an enhancement of wind speed and Reynolds stresses, a positive heat flux and a change of wind direction. NO <sub>x</sub> measurements indicated the simultaneous arrival of an `aged' air mass, which was corroborated by the wind predictions of a mesoscale numerical model. In all, the results indicate that the recirculation of O ₃ rich air masses is responsible for the said high-O ₃ events. Such air masses are produced during the transport of O ₃ precursors by the upslope flow toward mountainous suburbs during the day, and they return back to the city at night via downslope winds (i.e. mountain breeze). The corresponding flow patterns, and hence the high-O ₃ events, are determined by background meteorological conditions. The vertical profiling of O ₃ and flow variables during the morning transition points to a myriad of transport, mixing and chemical processes that determine the fate of tropospheric O ₃. How well such processes are incorporated and resolved in predictive O ₃ models should determine the accuracy of their predictions.     

Comparison of VOC emissions between air-dried and heat-treated Norway spruce (Picea abies), Scots pine (Pinus sylvesteris) and European aspen (Populus tremula) wood

Heat-treated wood is an increasingly popular decoration material. Heat-treatment improves dimensional stability of the wood and also prevents rot fungus growth. Although production of heat-treated wood has been rapidly increasing, there is only little information about the VOC emissions of heat-treated wood and its possible influences on indoor air quality. In the present study, VOC emissions from three untreated (air-dried) and heat-treated wood species were compared during a four weeks test period. It appeared that different wood species had clearly different VOC emission profiles. Heat-treatment was found to decrease VOC emissions significantly and change their composition. Especially, emissions of terpenes decreased from softwood samples and aldehydes from European aspen samples. Emissions of total aldehydes and organic acids were at the same level or slightly higher from heat treated than air-dried softwood samples. In agreement with another recent study, the emissions of furfural were found to increase and those of hexanal to decrease from all the wood species investigated. In contrast to air-dried wood samples, emissions of VOCs were almost in steady state from heat treated wood samples even in the beginning of the test.