Leaching of metals from fly ashes in the presence of complexing agents

The leachability of some metals (Al, As, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Ti, Zn) from fly ashes was studied in the presence of ethylenediamine tetraacetic acid (EDTA) and naturally occurring complexing agents-humic acids (HAs). Secondary complex-forming equilibria taking place in the leachates increase significantly the leached amounts of most metals. Kinetic experiments showed that almost the whole "available" amounts of metals are leached from fly ash within a time period of several hours (mostly within 20 h), with exceptions of matrix constituents (typically aluminium), which are released more slowly.     

Baseline levels of PCDD/Fs in soil and herbage samples collected in the vicinity of a new hazardous waste incinerator in Catalonia,Spain

The construction in Constantí (Catalonia, Spain) of a new hazardous waste incinerator (HWI), which is the first one in Spain, finished in 1999. In order to determine the temporal variation (1996–1998) in the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in the vicinity of the new HWI, 40 soil and 40 herbage samples were collected (1998) at the same sampling points in which samples had been taken two years before (1996). Each sample was analyzed for PCDDs and PCDFs by high resolution gas chromatography/high resolution mass spectrometry. In the 1996 survey, PCDD/F concentrations in soils ranged from 0.13 to 24.20 ng I-TEQ/kg (d.m.), with median and mean values of 0.67 and 1.68 ng I-TEQ/kg (d.m.), respectively. In the present study, PCDD/F concentrations ranged from 0.12 to 17.20 ng I-TEQ/kg (d.m.), with a median value of 0.75 ng I-TEQ/kg (d.m.) and a mean value of 1.59 ng I-TEQ/kg (d.m.). In turn, in the present study PCDD/F concentrations in vegetation ranged from 0.14 to 2.01 ng I-TEQ/kg (d.m.) (median and mean values: 0.23 and 0.31 ng I-TEQ/kg, respectively), while in the 1996 survey PCDD/F concentrations ranged from 0.24 to 1.22 ng I-TEQ/kg (d.m.) (median and mean values: 0.53 and 0.61 ng I-TEQ/kg, respectively). According to the present (1998) and the previous (1996) levels of PCDD/Fs found in soils and vegetation, the area under potential influence of the new facility shows a rather low contamination by these compounds. The current results should be useful to establish the environmental impact of the HWI.     

Scaled-up and economic assessment approach of the split-phase glycolysis process for the recycling of flexible polyurethane foam wastes

The economic viability of the split-phase glycolysis process for the recycling of any kind of flexible polyurethane foam waste employing crude glycerol as cleavage agent has been demonstrated. First, experiments at pilot plant scale were carried out to check that the process can be extrapolated to larger scales. With the goal of scaling-up the process from laboratory scale to pilot plant, geometric similarity criteria were applied together with dynamic similarity for laminar flow in agitated tank reactors. Hence, a pilot plant installation was designed with geometrically similar equipment to those used for lab scale, obtaining analogous results in terms of recovered polyol properties. Then, the basic design of a split-phase glycolysis industrial plant with a capacity for treating 270 Tm per year of flexible PU foams scraps was proposed. Finally, the economic feasibility of such recycling process was confirmed because of the obtention of a Net Present Value (NPV) of 1,464,555€, with an Internal Rate of Return (IRR) of 27.99%, and a payback time between 4 and 5 years.

     

Drivers and barriers to a circular economy adoption: a sector perspective on rare earth magnets

Journal of Material Cycles and Waste Management - The transition from the current linear to a circular economy (CE) is a great challenge, especially in industries where the theme was barely...     

Drivers and barriers to successful solid waste management: assessing through an aggregated indicator

Journal of Material Cycles and Waste Management - Solid waste management is the main topic of the circular economy and remains a challenge for public management, because despite the recent economic...     

Blending Linz–Donawitz and Blast Furnace slags with the Kambara reactor byproduct to improve their reuse in roadworks

Journal of Material Cycles and Waste Management - The use of industrial byproducts as replacement of natural aggregates has been extensively investigated to design eco-friendly roads. One of the...     

Polyhydroxyalkanoates: Biosynthesis from Alternative Carbon Sources and Analytic Methods: A Short Review

Journal of Polymers and the Environment - In recent decades, the global accumulation of plastics and the resulting pollution, as well as the increase in the price of oil, have driven studies aimed...     

Thermoplastic Starch (TPS)/Polylactic Acid (PLA) Blending Methodologies: A Review

Polylactic acid (PLA) and thermoplastic starch (TPS) are biodegradable polymers of biological origin, and the mixture of these polymers has been studied due to the desirable mechanical properties of PLA and the low processing cost of TPS. However, the TPS/PLA combination is thermodynamically immiscible due to the poor interfacial interaction between the hydrophilic starch granules and the hydrophobic PLA. To overcome these limitations, researchers studied the modification, processing, and properties of the mixtures as a strategy to increase the compatibility between phases. This review highlights recent developments, current results, and trends in the field of TPS/PLA-based compounds during the last two decades, with the main focus of improving the adhesion between the two components. The TPS/PLA blends were classified as plasticized, compatible, reinforced and with nanocomposites. This article presents, based on published research, TPS/PLA combinations, considering different methods with significant improvements in mechanical properties, with promising developments for applications in food packaging and biomedicine.

     

Active Biodegradable Film Based on Chitosan and Cenostigma Nordestinum' Extracts for Use in the Food Industry

Journal of Polymers and the Environment - Bioactive biodegradable films are emerging biomaterials in the food packaging field. This study aims to investigate the effect of different Cenostigma...