A model for estimation of potential generation of waste electrical and electronic equipment in Brazil

Sales of electrical and electronic equipment are increasing dramatically in developing countries. Usually, there are no reliable data about quantities of the waste generated. A new law for solid waste management was enacted in Brazil in 2010, and the infrastructure to treat this waste must be planned, considering the volumes of the different types of electrical and electronic equipment generated.This paper reviews the literature regarding estimation of waste electrical and electronic equipment (WEEE), focusing on developing countries, particularly in Latin America. It briefly describes the current WEEE system in Brazil and presents an updated estimate of generation of WEEE. Considering the limited available data in Brazil, a model for WEEE generation estimation is proposed in which different methods are used for mature and non-mature market products.The results showed that the most important variable is the equipment lifetime, which requires a thorough understanding of consumer behavior to estimate. Since Brazil is a rapidly expanding market, the “boom” in waste generation is still to come. In the near future, better data will provide more reliable estimation of waste generation and a clearer interpretation of the lifetime variable throughout the years.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Correlation analysis between sulphate content and leaching of sulphates in recycled aggregates from construction and demolition wastes

In some recycled aggregates applications, such as component of new concrete or roads, the total content of soluble sulphates should be measured and controlled. Restrictions are usually motivated by the resistance or stability of the new structure, and in most cases, structural concerns can be remedied by the use of techniques such as sulphur-resistant cements. However, environmental risk assessment from recycling and reuse construction products is often forgotten. The purpose of this study is to analyse the content of soluble sulphate on eleven recycled aggregates and six samples prepared in laboratory by the addition of different gypsum percentages. As points of reference, two natural aggregates were tested. An analysis of the content of the leachable amount of heavy metals regulated by European regulation was included. As a result, the correlation between solubility and leachability data allow suggest a limiting gypsum amount of 4.4% on recycled aggregates. This limit satisfies EU Landfill Directive criteria, which is currently used as reference by public Spanish Government for recycled aggregates in construction works.     

Wet and dry deposition of 129I in Seville (Spain) measured by accelerator mass spectrometry.

Iodine-129 (T1/2 = 1.57 x 10(7) yr) concentrations have been determined by accelerator mass spectrometry in rainwater samples taken at Seville (southwestern Spain) in 1996 and 1997. This technique allows a reduction in the detection limits for this radionuclide in comparison to radiometric counting and other mass spectrometric methods such as ICP-MS. Typical 129I concentrations range from 4.7 x 10(7) 129I atoms/l (19.2%) to 4.97 x 10(9) 129I atoms/l (5.9%), while 129I depositions are normally in the order of 10(8)-10(10) atoms/m2d. These values agree well with other results obtained for recent rainwater samples collected in Europe. Apart from these, the relationship between 129I deposition and some atmospheric factors has been analyzed, showing the importance of the precipitation rate and the concentration of suspended matter in it.     

A study of the atmospheric reaction of CH3S with O3 as a function of temperature

The atmospheric reaction of the methylthiyl radical (CH₃S) with O₃ was investigated as a function of temperature (259–381 K), in the pressure range of 25–300 Torr, using the technique of laser photolysis/laser-induced fluorescence. The resulting Arrhenius expression, with an uncertainty of ±2σ, was k₁(T=259–381 K)=(1.02±0.30)×10⁻¹² exp[(432±77) K/T] cm³ molecule⁻¹ s⁻¹. The obtained rate constant k₁ was independent of pressure over the limited range employed. Our results are compared with the previous studies carried out, at single temperature and as a function of temperature, by different techniques.     

Extractable atrazine and its metabolites in agricultural soils from the temperate humid zone

Extractable atrazine and its metabolites (hydroxyatrazine, deethylatrazine and deisopropylatrazine) were evaluated in agricultural soils from the temperate humid zone (Galicia, NW Spain) under laboratory conditions. The experiment was performed with five soils with different properties (organic C, soil texture and atrazine application history), both unamended and treated with atrazine at field application rate. Measurements of the atrazine compounds were made at different time intervals (1, 3, 6, 9 and 12 weeks) during a 3-month incubation period. Results showed that only hydroxyatrazine was detected in the extractable fraction of the unamended soils, with values remaining relatively constant throughout the incubation period. Atrazine addition notably increased the concentration of the parent compound and its degradation products; deisopropylatrazine and hydroxyatrazine were the main metabolites detected in the extractable fraction of the treated soils, whereas deethylatrazine was not detected. After 7 days incubation, values of total extractable residues, expressed as percentage of initially added atrazine, ranged from 75 to 86% (25–68% of atrazine, 7–11% of hydroxyatrazine and 9–57% of deisopropylatrazine). The values decreased rapidly during the first 3 weeks of incubation, showing values of 2–8% in soils with higher atrazine application and from 28 to 30% in soils with lower application history. At the end of the incubation, 2–8% of total extractable residues were still detected (0–4% of atrazine, 2–3% of hydroxyatrazine and 0–2% of deisopropylatrazine), indicating a residual effect of atrazine addition. These variations in the extractable fraction indicated that most added atrazine was rapidly degraded, especially in soils with higher application history.     

Assessment of groundwater contamination caused by uncontrolled dumping in old gravel quarries in the Besòs aquifers (Barcelona,Spain)

The contamination of groundwater in the aquifer of the La Llagosta basin (Besòs river basin) due to waste disposal in quarries formerly used for the extraction of dry raw materials has led to the cessation of groundwater extraction for public water supply. The mobilization of pollutants was largely caused by fluctuations in piezometric levels, which led to the washing of buried waste. The hydrogeochemical processes associated with uncontrolled waste disposal in these landfilled areas of the La Llagosta basin aquifer were studied along a flow path that crosses the contaminated area. The PHREEQC code was used to establish the reactions associated with the different mineral phases through inverse modeling. This transport code, ionic exchange phenomena, surface reactions and balance (mineral phase) reactions were used to simulate the dilution phenomenon associated with the pollution after the potential removal of the sources of contamination. One-dimensional advective–dispersive modeling indicates a substantial reduction in Ca, Mg, Na and SO₄²⁻ within one year and stabilization within four years.     

Sexual selection and the function of a melanin-based plumage ornament in polygamous penduline tits <Emphasis Type="Italic">Remiz pendulinus</Emphasis>

Melanin-based ornaments are often involved in signaling aggression and dominance, and their role in sexual selection is increasingly recognized. We investigated the functions of a melanin-based plumage ornament (facial ‘mask’) in male Eurasian penduline tits Remiz pendulinus in the contexts of male–male aggression, mating success, and parental care. The penduline tit is a passerine bird with a unique mating system in which both sexes may mate with several mates in a breeding season, and one (or both) parent deserts the clutch. Our study revealed that mask size of males is more likely an honest signal used by females in their mate choice decisions than a trait involved in male–male competition. First, mask size increased with both age and body condition, indicating that the mask may signal male quality. Second, males with larger masks paired more quickly and had more mates over the breeding season than males with smaller masks. Third, we found no evidence that male mask size signals male–male aggression or dominance during competitive encounters. The increased mating success of large-masked males, however, did not translate into higher reproductive success, as nestling survival decreased with mask size. Therefore, we conclude that there is either no directional selection on male mask size or males with larger masks receive indirect, long-term benefits.     

Advertisement-call modification,male competition,and female preference in the bird-voiced treefrog <Emphasis Type="Italic">Hyla avivoca</Emphasis>

Senders and receivers influence dynamic characteristics of the signals used for mate attraction over different time scales. On a moment-to-moment basis, interactions among senders competing for a mate influence dynamic characteristics, whereas the preferences of receivers of the opposite gender exert an influence over evolutionary time. We observed and recorded the calling patterns of the bird-voiced treefrog Hyla avivoca to assess how the dynamic characters of calls vary during interactions among groups of males in a chorus. This question was also addressed using playback experiments with males. Playback experiments with females showed how changes in dynamic call properties are likely to affect male mating success. Frogs calling in pairs, groups, or in response to playbacks produced longer calls than did isolated males. During call overlap, males often increased the duration of the silent interval (gaps) between the pulses of their calls so that the pulses of the calls of two neighbors interdigitated. This change resulted in increased variability of pulse rate, a traditionally static acoustic property; however, males also produced high proportions of non-overlapped calls in which variability in pulse rate was low and had species-typical values. Females preferred long calls to short- and average-duration calls, and non-overlapped calls to overlapped calls. Given a choice between pairs of overlapped calls, females preferred pairs in which the proportion of overlap was low and pairs in which the pulses of such calls interdigitated completely. The observed patterns of vocal competition thus reflect the preferences of conspecific females, which have influenced the evolution of the calling behavior of H. avivoca. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Territory characteristics and coexistence with heterospecifics in the Dartford warbler <Emphasis Type="Italic">Sylvia undata</Emphasis> across a habitat gradient

The study of successional gradients may help to understand the relative influence of habitat structure and competition on territory characteristics. Here, we evaluate the effects of vegetation cover, conspecific and heterospecific densities, and distance to the nearest neighbor on territory size, shape, and overlap in insectivorous birds. We studied these effects along a gradient of postfire habitat regeneration in which foliage cover and densities of focal species varied several-fold. We delineate 197 territories (minimum convex polygons) of the shrub-dwelling Dartford warbler (Sylvia undata) and 255 of the syntopic Sardinian (Sylvia melanocephala), subalpine (Sylvia cantillans) and melodious (Hippolais polyglotta) warblers at three plots in NE Catalonia (Spain and France) in 1987–2005. After accounting for the effect of the number of locations used to delineate polygons, generalized linear mixed models (GLMM) showed a reduction in territory area of the Dartford warbler as conspecific density increased and distance to nearest neighbor decreased, in accordance with the contender pressure hypothesis for territory size regulation. Heterospecific density was not included in the final model of territory size and the effect of habitat structure was marginal. Territory roundness was positively correlated with its size and with conspecific density, probably in relation to energetic constraints, and negatively with heterospecific density. Territorial exclusion was almost complete among Dartford warblers, whereas interspecific territory overlap was extensive and tended to increase with heterospecific density and with structural diversity along the gradient. Our results support the hypothesis that Mediterranean warbler coexistence derives from ecological segregation and not from interspecific territoriality.