An analysis of the developmental differences in Borneo’s Southeastern and Northwestern Coastal Zones

In this research, Landsat TM images were used to extract the land use information for Borneo’s coastal zones (0 to 35 km) during three time periods (1990, 2000, and 2010). Then, in combination with the DEM and shoreline types, the developmental differences under the influences of the geographical boundaries of the Borneo coastal zones were examined from such perspectives as the spatial distribution characteristics of the land development, sea-land gradient variation characteristics, and comparative analyses of the different regions. The results indicated that the geographic boundaries, as well as the different countries, had great influences on the development of the coastal zones. The regions with the most active development in Borneo’s coastal zones were mainly located in the estuary bay, onshore with land on both sides, and the near-shore alluvial plain with DEM?<?50 m. The northwestern coast zone showed relatively flat topography, and was close to an important international waterway. Therefore, the development in this area was found to be more intense than in the southeastern coastal zone, and which was characterized by a long developmental history. On one side of the geographical boundary, the development was also found to differ among the different countries. Malaysia was observed to be dominated by industrial plantations. Meanwhile, the industrial plantations, agriculture, and aquaculture in Indonesia were significantly increased, which was closely linked with the national economic policies. Furthermore, the development of Borneo’s coastal zones has led to vegetation degradation towards a constant inland development, plantation enlargements, agricultural development, and cleared and burnt areas, which have resulted in the land use transfer of 22,000 km² of forest land within the 0 to 35 km range.     

Changes in transport accessibility as a result of flooding: a case study of the Mazovia Province (Eastern Poland)

This paper presents the results of research investigating the impact of flooding on the temporal aspect of transport accessibility at national, regional and local levels in the Mazovia Province – an administrative region in Poland. For the purposes of this study the authors measured the theoretical journey times by private transport between settlement units for two variants: journeys made under normal circumstances, that is, without a flood; and journeys made during a flood event, which would necessitate diversions to avoid flooded road sections. This allowed the theoretical journey time differences to be calculated. It was assumed that vehicles move at the highest permissible speed along routes allowing the shortest travel times. The methods of accessibility assessment employed in this paper are based on distance measurements and use isochrones and a cumulative approach. Analysis carried out by the authors has shown that for interregional, intraregional and local journeys, the flooding of a part of the Mazovia region results in changes in travel times, but their absolute and relative magnitudes vary widely. It was found that in the case of national scale journeys the majority of relative journey time increases were no greater than three times the normal duration, while on a local scale they do not exceed 75%. For areas with a high risk of flooding there should be obligatory analyses of changes in transport accessibility; this would facilitate effective flood risk management. Appropriate traffic management in crisis situations would facilitate emergency and rescue services and help inhabitants and any other persons in flooded areas.     

Shell shape variation in populations of Mytilus chilensis (Hupe 1854) from southern Chile: a geometric morphometric approach

The pattern of shell shape variation in populations of the mussel, Mytilus chilensis (Hupe 1854) from Southern Chile was analyzed as a function of sample origin (cultivated vs. wild) and latitude, using standard tools of geometric morphometrics for landmark data. Additionally, posterior adductor muscle index (PAMI), Freeman condition index and shell thickness were measured in each sample. Highly significant differences in shell shape components were found among mussel populations. These differences are related to the origin of samples (expansion of the posterior adductor muscle scar, elongation of the lateral ligament and of the ventral umbo position in non-cultivated samples) and to latitude (more elongated shells and more extended posterior adductor muscle scar in most southern samples when compared with the northernmost ones). PAMI and shell thickness were statistically higher in wild population, and Freeman condition index was higher in cultivated shells. It is suggested that in wild populations of M. chilensis, the mussels may face higher predator pressures and other environmental stress factors. Consequently, individuals may be using higher energy fraction to reinforce shells and to promote adductor muscle growth at the expense of somatic growth. In contrast, individuals found in calm aquaculture environments are relatively protected from predators and use most of their assimilated energy in somatic growth. In turn, this growth depends on changes that covariate with shell morphology.     

Distribution and availability of potentially toxic metals in soil in central area of Belgrade,Serbia

Belgrade, capital city of Serbia, has over 1,600,000 inhabitants and over 400,000 vehicles trafficking every day on its streets. The investigation of soil pollution was performed by sequential extraction analysis to investigate the availability of potentially toxic metals (Zn, Cd, Pb, Co, Ni, Cu, Cr and Mn) under different oxidation and pH conditions. All investigated metals were mainly extracted from soils with neutral or acidic extractants. Serious pollution was observed along roads and streets with high traffic frequency, but Pb and Ni pollution was the highest since their concentrations exceed both soil Serbian standard and Canadian guidance values and is characteristic for all investigated sites. Cd, Cu, Cr and Zn concentrations are moderately high since they are between Canadian guideline and Serbian standard.     

Screening of phthalic acid esters in raw materials,premixes and feed additives

Phthalates are animal carcinogens and may cause death or tissue deformities. Samples of feedstuffs collected in 2005 and 2006 from industrial feed manufacturers in the Czech Republic were analysed for contamination with phthalic acid esters (PAEs), specifically di-2-ethylhexyl phthalate (DEHP) and di-n-butyl phthalate (DBP). Samples of feed additives, premixes and raw materials were collected (year 2005, n = 26). For soybean oil, the total volume of phthalates measured (DBP + DEHP) reached a level of 131.42 mg kg⁻¹; for rapeseed oil, fish meal and animal fats, the levels measured were 15.00, 7.96 and 58.87 mg kg⁻¹, respectively. The lowest level of DBP + DEHP was found in corn (2.03 mg kg⁻¹). Since phthalates were detected, samples of feed additives (n = 28) and raw materials (n = 28) were collected again in 2006. The highest levels of DBP + DEHP were found in raw materials containing fat. Phthalate levels in rapeseed oil samples ranged from 1.38 to 32.40 mg kg⁻¹ DBP + DEHP. For feed additives, contamination levels in vitamins and amino acids ranged from 0.06 to 3.15 and 1.76 to 4.52 mg kg⁻¹ DBP + DEHP, respectively. Here, we show that the levels of PAEs found in cereals such as wheat, barley and corn may be regarded as being alarmingly high, because cereals make up the largest proportion of compound feed of farm animals.     

Food waste in municipal mixed waste produced at household level: empirical evidence from the Czech Republic

Journal of Material Cycles and Waste Management - The problem of food waste is broadly discussed, but empirical data are still missing. The importance of this topic increases as the reporting of...     

电催化氧化技术处理造纸废水的实验研究

通过邻苯二甲酸氢钾(KHP)溶液的电解实验研究了德国引进的金属铌掺硼金刚石膜电极(Nb/BDD)的电化学性质,并利用该电极处理装置处理了东莞某造纸厂造纸废水。考察了电解时间、电流强度及废水的pH值、电解质的浓度、电导率等参数对电化学降解效率的影响。结果表明,Nb/BDD具有优异的污水降解性能,在pH值为3.0,电流密度为37.23 mA/cm2,电压6.9 V,NaCl充当电解质质量浓度0.4 g/L的条件下,电解200 min,装置对再生纸造纸废水的COD的去除率接近70%,BOD/COD为0.4,比能耗为27.6(kW.h/kg)。     

Hydrogeochemical and Isotopic Investigations on Groundwater Salinization in the Datong Basin,Northern China1

Abstract: Analyses of major elements, environmental isotope ratios (δ¹⁸O, δ²H), and PHREEQC inverse modeling investigations were conducted to understand the processes controlling the salinization of groundwater within the Datong Basin. The hydrochemical results showed that groundwater with high total dissolved solid (TDS) concentrations was dominated by sodium bicarbonate (Na‐HCO₃), sodium chlorite (Na‐Cl), and sodium sulfate (Na‐SO₄) type waters, whereas low‐TDS groundwater from near mountain areas was dominated by calcium bicarbonate (Ca‐HCO₃) and magnesium bicarbonate (Mg‐HCO₃) type waters. The characterization of the major components of groundwater and PHREEQC inverse modeling indicated that the aluminosilicate hydrolysis, cation exchange, and dissolution of evaporites (halite, mirabilite, and gypsum) governed the salinization of groundwater within the Datong Basin. The environmental isotope (δ¹⁸O, δ²H) and Cl^?/Br^? ratios revealed the impact of fast vertical recharge by irrigation returns and salt‐flushing water on the groundwater salinization. According to the analyses of major hydrochemical components and PHREEQC inverse modeling, evaporite dissolution associated with irrigation and salt‐flushing practice was probably the dominant controlling factor for the groundwater salinization, especially in the central part of the basin. Therefore, groundwater pumping for irrigation and salt‐flushing should be controlled to protect groundwater quality in this area.     

改进的稳健统计技术在排水检测人员技能评价中的应用

目前排水检测行业中仍缺乏对技术人员进行技能评价的方法,或虽有评价方法,但方法存在不尽规范、合理等问题。稳健统计技术作为能力验证试验中广泛使用的结果评价方法,可消除异常数据的影响,使评价结果准确可靠。将稳健统计技术改进,作为技能评价要素中的一个分量,按照操作的准确性、规范性与熟练性三个方面评价排水检测人员检测数据结果,可以较科学、合理地反映检测人员的技能水平,为提高检测工作质量和实验室管理起到一定的借鉴作用。     

原子荧光法测定污泥中总砷含量的不确定度评定

对采用原子荧光法测定污泥中总砷过程中引入的不确定度进行分析,找出了影响测定结果的因素,并对各不确定度分量及合量进行了评定。测量不确定度主要来源于试样称量、标准溶液配制、工作曲线拟合、污泥含水率、各种玻璃量器的使用及测量重复性。其中样品预处理、样品消解液中总砷的质量浓度及污泥含水率所产生的不确定度较大。这对进一步优化试验方法,提高检测结果的准确性有重要意义。