A comparative study on metal sorption by brown seaweed

This study compared the sorption of Ag, Cd, Co, Cd, Mn, Ni, Pb and Zn by a Ca-treated Sargassum biomass at pH 5.0, under low and high ionic strength (IS) conditions. The sorption isotherms of As [As(V)] and Cr [Cr(III) and Cr(VI)] were also determined at low IS. The isotherm data for the eight cationic metals and Cr(III) were well fitted by Langmuir equations. Generally, the maximum metal uptake (Umax) followed: Cr(III) > Pb approximately Cu > Ag approximately Zn approximately Cd > Ni approximately Mn approximately Co > Cr(VI) > As(V) at low IS and Pb > Cu > Co > Mn approximately Cd > Zn approximately Ag > Ni at high IS. As(V) did not bind to the seaweed at pH 5.0. The results indicated that sorption of Pb was not affected by the increasing IS, though the percentage of free Pb ions in the water was greatly reduced as predicted by the speciation model. High IS lowered Umax by 10-36% (except Co and Pb), and lowered the affinity constant of the metal by 33-91% for all cationic metals, as compared to low IS. Moreover, the removal efficiency of the cationic metals and Cr decreased exponentially with initial metal concentrations and was lower at high IS. Ion-exchange was the mechanism responsible for the cationic metal sorption onto the seaweed, and Na ion interfered with the cationic metal binding through electrostatic interaction. In conclusion, this study showed the differential binding capacity of the Sargassm biomass for different metals and oxidation states and the differential effects of IS. According to the present results, Sargassum may be considered a good biosorbent for cationic metals (especially Pb) in both low and high-salt containing wastewater.     

Reducing dust exposure in indoor climbing gyms

As users of indoor climbing gyms are exposed to high concentrations (PM(10) up to 4000 μg m(-3); PM(2.5) up to 500 μg m(-3)) of hydrated magnesium carbonate hydroxide (magnesia alba), reduction strategies have to be developed. In the present paper, the influence of the use of different kinds of magnesia alba on dust concentrations is investigated. Mass concentrations, number concentrations and size distributions of particles in indoor climbing gyms were determined with an optical particle counter, a synchronized, hybrid ambient real-time particulate monitor and an electrical aerosol spectrometer. PM(10) obtained with these three different techniques generally agreed within 25%. Seven different situations of magnesia alba usage were studied under controlled climbing activities. The use of a suspension of magnesia alba in ethanol (liquid chalk) leads to similar low mass concentrations as the prohibition of magnesia alba. Thus, liquid chalk appears to be a low-budget option to reduce dust concentrations. Magnesia alba pressed into blocks, used as powder or sieved to 2-4 mm diameter, does not lead to significant reduction of the dust concentrations. The same is true for chalk balls (powder enclosed in a sack of porous mesh material). The promotion of this kind of magnesia alba as a means of exposure reduction (as seen in many climbing gyms) is not supported by our results. Particle number concentrations are not influenced by the different kinds of magnesia alba used. The particle size distributions show that the use of magnesia alba predominantly leads to emission of particles with diameters above 1 μm.     

Business strategy,work processes and human resource training: are they congruent?

This study examines the extent to which human resource (HR) training (content and context) is contingent on business strategy (i.e. classified according to Miles and Snow (1984) typology—‘Designing strategic human resource systems’, Organizational Dynamics, 13 , 36–52) as well as the characteristics of the work process. Sixty‐five Spanish organizations (i.e. 65 senior executives and 65 senior HR officers) participated in the study. Using primarily factorial and cluster analyses, support was found to the assertion that companies adopting a particular type of training strategy/policy have a high degree of internal consistency amongst the training objectives sought. In terms of work processes and training, results indicate that under work processes where the content of work provides for enrichment and for long‐term results, companies tend to adopt training strategies where emphasis is on enhancement of individual specialized skills aimed at improving direct productivity. By contrast, firms who use work processes that are characterized by repetitive and routine tasks, de‐emphasize this type of training content. Results also indicae that limited level of contingencies exist between training policies and business strategy, especially when time dimension is also accounted for. While the theory suggests that organizations that have their HR training fit (contingent) on their business strategy are more effective, the empirical results portrayed in this study shows a more complex picture. Copyright © 2000 John Wiley & Sons, Ltd.     

Monitoring and modelling walking track impacts in the Tasmanian Wilderness World Heritage Area, Australia

A program has been developed for monitoring the condition of unimproved walking tracks on a 1000-km track system in Western Tasmania, and it has been used as the basis of an eight-year study of track-impact development. The monitoring technique involves measuring track depth and two track-width indicators at permanently marked and widely dispersed sites, each site comprising ten transects located at 2-m intervals. Sites have been 'typed' on the basis of track slope, drainage and substrate characteristics, and the typing scheme has been tested and refined by assessing the relationship between type-usage groups and observed impacts. Analysis reveals that track depth and rates of erosion are strongly influenced by track type and to a lesser extent by usage, while track width is influenced mainly by usage and track bogginess. The time-invariant variable 'usage gradient' was introduced to compensate for the fact that usage levels on most walking tracks in Western Tasmania have varied over time. Data derived from multiple inspections at 2-3 year intervals since 1994 from over 250 sites have been used to derive impact/time curves for different type-'usage gradient' groups. Each of the impact variables can be approximated by the formula m = alphatBeta, where m is the expected value of the impact variable, t is chronological time, and alpha and Beta are constants characteristic of the impact variable and type-'usage gradient' group in question. The typing scheme and impact-development model have the potential to be used for systematically describing and predicting impacts over extensive systems of 'typed' tracks. The implications of these findings for the ongoing monitoring, sitting and management of walking tracks are discussed.     

Natural gamma radiation map (MARNA) and indoor radon levels in Spain

During the last decade, the Department of Applied and Medical Physics has been involved in the development of a radiation protection programme. In the framework of this programme, measurements of indoor radon, principally, have been carried out nationwide. Geometric mean radon concentrations of 45 Bq m(-3) in the whole country and 130 Bq m(-3) in the high natural radiation area have been estimated. On the other hand, the so-called MARNA Project is developed into the framework of an agreement subscribed between the Spanish Nuclear Safety Council (CSN) and the National Uranium (ENUSA), the first phase of which has been the elaboration of the Natural Gamma Radiation Map of Spain on the scale of 1:1,000,000 using radiometric data generated in the 30 years of the lifetime of the ancient National Uranium Exploration and Investigation Plan mainly through airborne, carborne, and by foot surveys, within the MARNA Project itself. The lowest averaged dose rate from external gamma radiation (19.3 nGyh(-1)) was found in carbonate bedrock and the highest (87.7 nGyh(-1)) was found in granite and clay bedrock. This paper summarizes the main results obtained from the measurements performed in both projects, with special interest in those concerning the correlation between the data reported in order to conclude about the potential benefit of the MARNA maps in the definition of affected areas in the country.     

Nitrogen oxide and methane emissions under varying tillage and fertilizer management

Comprehensive assessment of the total greenhouse gas (GHG) budget of reduced tillage agricultural systems must consider emissions of nitrous oxide (N2O) and methane (CH4), each of which have higher global warming potentials than carbon dioxide (CO2). Tillage intensity may also impact nitric oxide (NO) emissions, which can have various environmental and agronomic impacts. In 2003 and 2004, we used chambers to measure N2O, CH4, and NO fluxes from plots that had been managed under differing tillage intensity since 1991. The effect of tillage on non-CO2 GHG emissions varied, in both magnitude and direction, depending on fertilizer practices. Emissions of N2O following broadcast urea (BU) application were higher under no till (NT) and conservation tillage (CsT) compared to conventional tillage (CT). In contrast, following anhydrous ammonia (AA) injection, N2O emissions were higher under CT and CsT compared to NT. Emissions following surface urea ammonium nitrate (UAN) application did not vary with tillage. Total growing season non-CO2 GHG emissions were equivalent to CO2 emissions of 0.15 to 1.9 Mg CO2 ha(-1) yr(-1) or 0.04 to 0.53 Mg soil-C ha(-1) yr(-1). Emissions of N2O from AA-amended plots were two to four times greater than UAN- and BU-amended plots. Total NO + N2O losses in the UAN treatment were approximately 50% lower than AA and BU. This study demonstrates that N2O emissions can represent a substantial component of the total GHG budget of reduced tillage systems, and that interactions between fertilizer and tillage practices can be important in controlling non-CO2 GHG emissions.     

Characterization of slow pyrolysis biochars: effects of feedstocks and pyrolysis temperature on biochar properties

Biochars are increasingly used as soil amendment and for C sequestration in soils. The influence of feedstock differences and pyrolysis temperature on biochar characteristics has been widely studied. However, there is a lack of knowledge about the formation of potentially toxic compounds that remain in the biochars after pyrolysis. We investigated biochars from three feedstocks (wheat straw, poplar wood, and spruce wood) that were slowly pyrolyzed at 400, 460, and 525°C for 5 h (straw) and 10 h (woodchips), respectively. We characterized the biochars' pH, electrical conductivity, elemental composition (by dry combustion and X-ray fluorescence), surface area (by N adsorption), water-extractable major elements, and cation exchange capacity (CEC). We further conducted differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffractometry to obtain information on the biochars' molecular characteristics and mineralogical composition. We investigated trace metal content, total polycyclic aromatic hydrocarbon (PAH) content, and PAH composition in the biochars. The highest salt (4.92 mS cm) and ash (12.7%) contents were found in straw-derived biochars. The H/C ratios of biochars with highest treatment temperature (HTT) 525°C were 0.46 to 0.40. Surface areas were low but increased (1.8-56 m g) with increasing HTT, whereas CEC decreased (162-52 mmol kg) with increasing HTT. The results of DSC and FTIR suggested a loss of labile, aliphatic compounds during pyrolysis and the formation of more recalcitrant, aromatic constituents. X-ray diffractometry patterns indicated a mineralogical restructuring of biochars with increasing HTT. Water-extractable major and trace elements varied considerably with feedstock composition, with trace elements also affected by HTT. Total PAH contents (sum of EPA 16 PAHs) were highly variable with values up to 33.7 mg kg; irrespective of feedstock type, the composition of PAHs showed increasing dominance of naphthalene with increasing HTT. The results demonstrate that biochars are highly heterogeneous materials that, depending on feedstock and HTT, may be suitable for soil application by contributing to the nutrient status and adding recalcitrant C to the soil but also potentially pose ecotoxicological challenges.     

Formation factor logging by electrical methods. Comparison of formation factor logs obtained in situ and in the laboratory

In this paper, a new in situ method for obtaining the formation factor, which is essential for the matrix diffusion, is described and tested in intrusive igneous rock. The method is based on electrical resistivity measurements in rock where the pore water and rock resistivities are essential parameters. The method is based on electromigration instead of diffusion as in traditional diffusion experiments. In previous works, quantitative formation factors of rock have been obtained by electrical methods in the laboratory. Here, a similar approach is used in situ. An in situ logging campaign was performed by SKB during 2000 in the 1700-m-deep borehole KLX02 in Laxemar, Sweden. The rock resistivity was measured with the slimhole Dual Laterolog from Antares. The groundwater resistivity was measured with the Difference Flow Meter from Posiva. A formation factor log was obtained with the maximum vertical resolution of 10 cm. In order to validate the log, 100 rock samples were taken from the bore core, and a formation factor log was obtained by using electrical methods in the laboratory. Both direct current (DC) and alternating current (AC) were used. The measurements on the core confirmed that the in situ log was quantitative, but with a possible systematic error. The in situ formation factors were on average about 1/3 to 1/5 of the laboratory formation factors, depending on depth.     

Chlorinated hydrocarbons and shell thinning in eggs of (Accipiter) hawks in Ontario, 1986-1989

Eggs of sharp-shinned hawks (Accipiter striatus), Cooper's hawks (A. cooperii), and northern goshawks (A. gentilis) were collected from nests in south-central Ontario from 1986 to 1989. Detectable levels of the chlorinated hydrocarbons DDE, DDT, DDD, mirex, photomirex, cis-nonachlor, trans-nonachlor, oxychlordane, dieldrin, heptachlor expoxide, HCB and PCB were present in all the eggs analyzed. Mean contaminant levels were highest in sharp-shinned hawks, slightly lower in Cooper's hawks, and significantly lower in goshawks; for example, mean DDE values were 7.23, 4.48 and 0.90 mg kg(-1) (wet weight), respectively. Total PCB levels were generally less than 1.5 mg kg(-1), lower than those associated with reproductive effects in field and laboratory studies with other species. Mean shell thicknesses of sharp-shinned and Cooper's hawk eggs were significantly less than mean pre-DDT era thicknesses (-10 and -8%, respectively), reductions that were probably not relevant to reproductive success. Goshawk eggs exhibited no significant reduction in shell thickness. Contaminant levels among the three species probably reflect differing food habits and migratory patterns.     

Reduced Chitinase Activities in Ant Plants of the Genus Macaranga

Many plant species have evolved mutualistic associations with ants, protecting their host against detrimental influences such as herbivorous insects. Letourneau (1998) reported in the case of Piper that ants defend their plants principally against stem-boring insects and also reduce fungal infections on inflorescences. Macaranga plants that were experimentally deprived of their symbiotic Crematogaster ants suffered heavily from shoot borers and pathogenic fungi (Heil 1998). Here we report that ants seem to reduce fungal infections actively in the obligate myrmecophyte Macaranga triloba (Euphorbiaceae), while ant-free plants can be easily infected. We also found extremely low chitinase activity in Macaranga plants. The plants' own biochemical defense seems to be reduced, and low chitinase activity perhaps may represent a predisposition for the evolution of myrmecophytism. These plants are therefore highly dependent on their ants, which obviously function not only as an antiherbivore defense but also as an effective agent against fungal pathogens. Received: 5 August 1998 / Accepted in revised form: 18 November 1998