Organochlorine pesticides in soil under irrigated cotton farming systems in Vertisols of the Namoi Valley, north-western New South Wales, Australia

Organochlorine pesticides (OCPs) such as DDT and DDE have been detected in the surface 0.2 m of Vertisols in the lower Namoi Valley of north western New South Wales, Australia even though they have not been applied to crops since 1982. However, their presence in the deeper soil horizons has not been investigated. The objective of this study was to determine if OCPs were present to a depth of 1.2 m in Vertisols under irrigated cotton farming systems in the lower Namoi Valley of New South Wales. Soil was sampled from the 0-1.2 m depths in three sites, viz. the Australian Cotton Research Institute, ACRI, near Narrabri (149°36′E, 30°12′S), and two cotton farms near Wee Waa (149°27′E, 30°13′S) and Merah North (149°18′E, 30°12′S) in northern New South Wales, Australia. The OCPs detected and their metabolites were α-endosulfan, β-endosulfan, endosulfan sulphate, DDD, DDE, DDT and endrin. The metabolite DDE, a breakdown product of DDT, was the most persistent OCP in all depths analysed. Endosulfan sulphate was the second most persistent followed by endrin > α-endosulfan > β-endosulfan > DDT and DDD. DDT was sprayed extensively in the lower Namoi Valley up to the early 1980s and may explain the persistence of DDE in the majority of soil samples. Dicofol and Dieldrin, two OCPs previously undocumented in Vertisols were also detected. The movement of OCPs into the subsoil of Vertisols may occur when irrigation or rain transports soil colloids and organic matter via preferential flow systems into the deeper layers of a soil profile. Persistence of OCPs was closely correlated to soil organic carbon concentrations. The persistence in soil of OCP’s applied to cotton crops grown more than two decades ago suggests that they could enter the food chain. Their presence at depths of 1.2 m suggests that they could move into groundwater that may eventually be used for domestic and stock consumption.     

Electron transfer sensitized photodechlorination of surfactant solubilized PCB 138

Sensitized photodechlorination of polychlorinated biphenyl, PCB 138, in three different surfactant solutions was studied. The sensitizer of choice was leuco-methylene blue, which was produced in situ from methylene blue using either triethylamine or sodium borohydride. Three types of surfactants, anionic (SDS), neutral (TWEEN 80), and cationic (CTAB) at different concentrations were investigated. The neutral and cationic surfactants were found to be more effective than anionic. In each case the surfactant concentration was found to play a significant role in the rate of dechlorination. For different sensitized systems (triethylamine or sodium borohydride), a different product distribution and a different pathway of dechlorination was observed.     

Association of serum lead and mercury level with cardiometabolic risk factors and liver enzymes in a nationally representative sample of adolescents: the CASPIAN-III study

This study aims to determine the difference of serum Pb and Hg levels in adolescents with or without metabolic syndrome (MetS) and the association of serum levels of these heavy metals with cardiometabolic risk factors and liver enzymes in Iranian adolescents. The study population consisted of 320 adolescents (160 with MetS and 160 healthy controls). The relationship between serum heavy metals and cardiometabolic risk factors was assessed by linear regression. The odds ratios (OR) of having metabolic syndrome across Pb and Hg quartiles were determined by multiple logistic regression analysis. The mean (SD) of Pb and Hg concentrations were higher in adolescents with MetS than in those without it (0.83 (0.27) and 0.17 (0.01) vs. 0.65 (0.15) and 0.10 (0.08)?μg/L, P?=?0.01 and 0.0001, respectively). Increase in serum Pb and Hg was associated with increase in some cardiometabolic risk factors. Among boys and girls, diastolic blood pressure (DBP), fasting blood glucose, total cholesterol (TC), triglycerides (TG), and alanine aminotransaminase increased significantly across quartiles of serum Pb. Among girls, SBP, DBP, TC, and TG had a significant increase across Hg quartiles. The corresponding figure among boys was significant for SBP, DBP, and TG. Higher quartiles of Pb increased the risk of having MetS (OR 95 % CI 3.10, 2.25–4.27), the corresponding figure was 2.03, 1.75–3.16, across Hg quartiles. Our study showed significant associations between serum Pb and Hg levels with cardiometabolic risk factors in adolescents. In future surveys, the role of potential confounders should be considered more extensively. The clinical significance of these findings needs to be confirmed in longitudinal studies. By considering the origins of chronic diseases from early life, controlling environmental pollutants should be considered as a health priority for primordial or primary prevention of noncommunicable diseases.     

Systematic review and meta-analysis on the association between phthalates exposure and insulin resistance

Environmental Science and Pollution Research - This study aims to provide an overview of human studies on the association of exposure to phthalates and insulin resistance. We systematically...     

Daily dietary intakes of zinc,copper, lead,and cadmium as determined by duplicate portion sampling combined with either instrumental analysis or the use of food composition tables,Shiraz, Iran

Estimation of essential and toxic element intakes is crucial to evaluate the risks of deficiency or toxicity. The purpose of this study was to investigate and also to compare the dietary intakes of zinc (Zn) and copper (Cu) by adults living in Shiraz, Iran, determined by two procedures: duplicate portion sampling of 21 hospital meals combined with either instrumental analysis (voltammetric measurement) or the use of food composition tables (FCTs). The level of exposure to lead (Pb) and cadmium (Cd) was evaluated as well. The daily Zn intakes of both methods were not significantly different and were higher than the RDA values except the value measured by the instrumental analysis which was lower than the RDA established for a male adult. Daily intake of Cu determined by instrumental analysis was significantly lower and closer to RDA for adults compared with the value estimated by FCTs. The dietary intakes of Pb and Cd were 313 and 61 % of the respective provisional tolerable weekly intakes (PTWIs), respectively. The accuracy of two methods used for estimation of Zn intake was similar. In the case of Cu, the use of FCTs, in which the influence of environmental conditions and dietary habits of meal preparation is not taken into account, overestimated dietary intake. The risk of zinc deficiency was found in adult males. Moreover, the estimated intake of Pb, but not Cd, could be a cause of concern for Shiraz population. Thus, conducting regular periodic studies to assess the dietary intake of mentioned elements are recommended.     

Health risk assessment of potentially toxic elements intake via food crops consumption: Monte Carlo simulation-based probabilistic and heavy metal pollution index

Environmental Science and Pollution Research - The aim of this study is to assess the content of heavy metals and their potential health risk in consumed food crops. To this end, the samples from...     

Biosorption potential of Cr(VI) by Kocuria sp. ASB107, a radio-resistant bacterium isolated from Ramsar,Iran

Heavy metal pollution in soil and wastewater is a worldwide environmental issue in which microorganisms play a significant role for its removal. In the present study, biosorption of Cr(VI) by the live and dead cells of Kocuria sp. ASB107, a radio-resistant bacterium, was investigated. The effect of contact time, solution pH, initial hexavalent chromium concentration and adsorbent dose on biosorption efficiency was studied. Also, live cells were further immobilised on various matrices by different techniques and then were examined for tolerance to chromium biosorption. Experimental results indicated that the removal efficiency of chromium increased with decrease in pH, initial Cr(VI) concentration, and also increase in adsorbent dose and the contact time. The maximum removal efficiency of live and dead cells at acidic pH of 4–4.5, contact time of 24 hours, adsorbent dose 1.6?g/100?mL and initial chromium concentration 25?mg/L were 82.4% and 69.2%, respectively. The adsorption data was described well by Langmuir isotherm model. Among all immobilisation techniques tested, cross-linking showed the highest biosorption of Cr(VI). Results indicated that live cells of Kocuria sp. ASB107 were better than dead ones.     

Optimization and determination of Cd (II) in different environmental water samples with dispersive liquid�Cliquid microextraction preconcentration combined with inductively coupled plasma optical emission spectrometry

Dispersive liquid?Cliquid microextraction followed by inductively coupled plasma-optical emission spectrometry has been investigated for determination of Cd(II) ions in water samples. Ammonium pyrrolidine dithiocarbamate was used as chelating agent. Several factors influencing the microextraction efficiency of Cd (II) ions such as extracting and dispersing solvent type and their volumes, pH, sample volume, and salting effect were optimized. The optimization was performed both via one variable at a time, and central composite design methods and the optimum conditions were selected. Both optimization methods showed nearly the same results: sample size 5 mL; dispersive solvent ethanol; dispersive solvent volume 2 mL; extracting solvent chloroform; extracting solvent volume 200  $\upmu $ L; pH and salt amount do not affect significantly the microextraction efficiency. The limits of detection and quantification were 0.8 and 2.5 ng L^???1, respectively. The relative standard deviation for five replicate measurements of 0.50 mg L^???1 of Cd (II) was 4.4%. The recoveries for the spiked real samples from tap, mineral, river, dam, and sea waters samples ranged from 92.2% to 104.5%.     

Heavy metals removal/stabilization from municipal solid waste incineration fly ash: a review and recent trends

Waste treatment using thermal technologies, such as incineration, leads to the production of pollutants and wastes, including fly ash (FA). Fly ash contains heavy metals (HMs) and other contaminants and can potentially pose high risks to the environment and negatively impact health and safety. Consequently, stabilizing fly ash prior to either use or landfilling is crucial. The toxicity of fly ash through heavy metal leaching can be assessed using leaching tests. The leaching rates of heavy metals primarily depend on the surrounding conditions as well as fly ash properties and metal speciation. Physical separation, leaching or extraction, thermal treatment and solidification/chemical stabilization are proposed as suitable approaches for fly ash treatment. Economic considerations, environmental concerns, energy consumption and processing times can define the efficiency and selection of the treatment approach. This review considers the latest findings and compares the advantages and shortcomings of different fly ash treatment methods with the aim of highlighting the recent advances in the field. The review concludes that the simultaneous implementation of various methods can lead to highly efficient heavy metals removal/stabilization while simultaneously taking economic and environmental considerations into account.