Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone after the Great East Japan Earthquake

Residences located within 20 km of the damaged Fukushima Daiichi Nuclear Power Plant were evacuated shortly after the Great East Japan Earthquake. The levels of airborne and surface fungi were measured in six houses in the evacuation zone in August 2012 and February 2013. Airborne fungal levels in all of the houses in the summer were higher than the environmental standard levels for residential houses published in Architectural Institute of Japan (>1000 colony-forming units [CFU]/m³). In two houses whose residents rarely returned to visit, fungal levels were extremely high (>52,000 CFU/m³). Although fungal levels in the winter were much lower than those in the summer, they were still higher than environmental standard levels in several houses. Indoor fungal levels were significantly inversely related to the frequency with which residents returned, but they were not correlated with the air exchange rates, temperature, humidity, or radiation levels. Cladosporium spp. and Penicillium spp. were detected in every house. Aspergillus section Circumdati (Aspergillus ochraceus group) was also detected in several houses. These fungi produced ochratoxin A and ochratoxin B, which have nephrotoxic and carcinogenic potential. The present study suggests that further monitoring of fungal levels is necessary in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone, and that some houses may require fungal disinfection.

Implications: The results suggest that residents’ health could be at risk owing to the high levels of airborne fungi and toxic fungi Aspergillus section Circumdati. Therefore, monitoring and decontamination/disinfection of fungi are strongly recommended before residents are allowed to return permanently to their homes. In addition, returning to home with a certain frequency and adequate ventilation are necessary during similar situations, e.g., when residents cannot stay in their homes for a long period, because fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone were inversely correlated with the frequency with which residents returned to visit their houses.     

Leaching characteristics of rare metal elements and chlorine in fly ash from ash melting plants for metal recovery

In terms of resource recovery and environmental impact, melting furnace fly ash (MFA) is attracting much attention in Japan due to its high metal content. The study aims to obtain fundamental information on using a water extraction method not only to concentrate valuable rare metals but also to remove undesirable substances such as chlorine for their recovery from MFA. The composition and leaching characteristics of MFA was investigated. The results revealed that the metal content in MFA is nearly equal to raw ore quality. The content of Ag, In, Pd, Pb, and Zn is, in fact, higher than the content of raw ore. As for leaching behavior, Ag, Bi, In, Ga, Ge, Sb, Sn, and Te showed the lowest release at a neutral pH range. Pd was leached constantly regardless of pH, but its concentration was quite low. On the other hand, most of the Tl was easily leached, revealing that water extraction is not appropriate for Tl recovery from MFA. Major elements Cl, Ca, Na, and K, occupying about 70% of MFA, were mostly leached regardless of pH. Base metal elements Cu, Pb, and Zn showed minimum solubility at a neutral pH. The leaching ratio of target rare metal elements and base metal elements suggests that the optimal pH for water extraction is 8-10, at which the leaching concentration is minimized. The water extraction process removed most of the Cl, Ca, Na, and K, and the concentration of rare metals and base metals increased by four or five times.     

Factors contributing to seasonal variations in wet deposition fluxes of trace elements at sites along Japan Sea coast

In this study, we measured the wet deposition fluxes of ten trace elements (As, Cd, Cr, Cu, Mn, Ni, Pb, Sb, V and Zn) from December 2002 to March 2006 at three sites along the Japan Sea coast, which have been strongly affected by the long-range transport of air pollutants from the Asian continent. Also, factors, contributing to their seasonal variations were investigated. At the northern and central sites, the monthly wet deposition fluxes of all or most trace elements greatly increased during the cold season (typically, November–April), along with their monthly average (volume-weighted) concentrations in the precipitation. The cold/warm season ratios for the average concentrations of trace elements in precipitation were within the range of 2.7–5.1 at the northern site and 1.8–5.9 at the central site, which were similar to the average scavenging ratios (= concentration in precipitation/concentration in air) at each site. However, there were small differences (0.47–1.2 at the northern site and 0.73–1.7 at the central site) in the ratios of average concentrations in air between the two seasons. These suggest that the increase in the wet deposition fluxes of trace elements during the cold season is due to increases in their scavenging ratios. On the other hand, the result for the southern site was different from those at the other sites. The number of days when the daily maximum wind speed exceeded 10 m s^?1 at the meteorological observatories near the study sites increased markedly during the cold season at the northern and central sites, showing that strong winds usually blow during the cold season at those sites, but not at the southern site. Higher wind speed transports larger amounts of constituents into the cloud system, which can result in their increased concentrations in precipitation. Thus, high scavenging ratios of trace elements during the cold season may be caused by the increase in their amounts of discharge into the cloud system owing to high wind speed, suggesting that wind speed is an important factor in the seasonal variations in the wet deposition fluxes.     

Fundamental characteristics of input waste of small MSW incinerators in Korea

Waste incineration in a small incinerator is a simple and convenient way of treating waste discharged from small areas or from large facilities and buildings such as business centers, marketplaces, factories, and military units. Despite their ostensible advantages, however, many small incinerators frequently suffer from serious problems, e.g., unsystematic waste feeding, unstable combustion, deficient air pollution control devices, and consequently, environmental pollution. To obtain a better understanding of the characterization of wastes in small incinerators, we investigated a series of fundamental characteristics, i.e., physical composition, bulk density, proximate and ultimate analysis, potential energy content, and so on. The main waste components in small incinerators were identified as paper and plastic; the proportion of food waste was less than that in large incinerators. Especially, a low ratio of food waste had a strong influence on other waste characteristics, e.g., lower moisture content and bulk density, and higher potential energy. On the other hand, in contrast with that of HCl, there was no distinguishable linear relationship between Cl content in waste and PCDD/DF concentration in combustion gas.     

A GIS-based zoning of illegal dumping potential for efficient surveillance

To assist in the efficient surveillance against illegal dumping, this study examined and evaluated two methods to illustrate the illegal dumping potential of sites using GIS (Geographic Information System) data. One approach focused on the occurrence of illegal dumping sites; the other on the size of the illegal dumping. Both approaches to zoning were implemented for the Kanto region of Japan, utilizing seven or eight major geographical attributes most closely related to illegal dumping. The zoning results revealed the areas requiring patrols against illegal dumping. Evaluation of the zoning results using the ROC (Receiver Operating Characteristic) curve showed the number of illegal dumping sites detectable under certain surveillance conditions and that the size-based zoning was superior, but this superiority was insignificant for revealing sites with higher potential for large illegal dumping, for which it would be sufficient to use the occurrence-based zoning. The evaluation also showed the contribution of each geographical attribute. Finally, application of the ROC curve to the surveillance planning process was examined, which enables the total social cost of pollution by illegal dumping, rehabilitation of dumping sites, and illegal dumping surveillance to be minimized.     

Enhancement of biodegradation of oil adsorbed on fine soils in a bioslurry reactor

Techniques for enhancing the biodegradation of oil-contaminated fine soils in a slurry-phase bioreactor were investigated. Using a model system consisting of kaolin particles containing adsorbed n-dodecane as a diesel fuel surrogate, we investigated how increasing the temperature and adding a surfactant and various hydrophobic support media affected the biodegradation rate of n-dodecane. Increasing the temperature from 25 to 35 degrees C decreased the time required for complete degradation of n-dodecane by 30%, from 110h to 80h. Addition of the surfactant polyethylene glycol p-1,1,3,3-tetramethylbutylphenyl ether decreased the degradation time to less than 48h at 35 degrees C, although a high concentration of the surfactant (3000mgl(-1)) was required. We suspect that the surfactant increased the degradation rate by solubilizing the n-dodecane into the solution phase in which the microorganisms were suspended. We tested five types of organic polymers as support media for the microorganisms and found that the biodegradation time could be reduced by approximately 50% with a support medium made from polyurethane; in the presence of this medium, only 36h was required for complete decomposition at 35 degrees C. The reduction in the degradation time was probably due to transfer of the n-dodecane from the soil to the support medium, which improved contact between the n-dodecane and the microorganisms. The polyurethane support medium bearing the microorganisms was stable and could be reused.     

Effects of the tsunami on fisheries and coastal livelihood: a case study of tsunami-ravaged southern Sri Lanka

Beyond the death toll, the tsunami of 26 December 2004 crippled many of the livelihood assets (human, social, physical, financial and natural) available to assist those directly affected. Drawing on surveys of three villages in three districts in the south of Sri Lanka, this paper describes the livelihood asset building capacity of the fishing communities. Assessments are also made of the impact of the tsunami on coastal communities and the impact of government policy on rebuilding. A livelihood asset score was calculated for each village by comparing their strengths in capacity building. In all aspects of capital building, including human, social, financial, physical and natural capital, the fishing community in Tangalle was significantly ahead of the fishing communities in Hikkaduwa and Weligama. Experienced fishermen with better educational backgrounds had a significant influence on the capacity building of livelihood assets. Relocation and resettlement plans brought persistent uncertainty to fishermen in Hikkaduwa and Weligama and threatened to disrupt their community bonds and social networks.