Leachability of municipal solid waste ashes in simulated landfill conditions

In Japan the volume of municipal solid waste is reduced by incineration, with fly ash and bottom ash disposed in controlled landfills. The leachability of anions and heavy metal cations, Zn, Cu and Pb, from MSW fly ash and bottom ash at different pHs was examined using batch- and column-leaching tests. The MSW ashes had a high capacity for neutralizing acids. Behaviour during leaching depended on the pH of the solution. For the volumes applied, the leachabilities of MSW fly ash were very similar at pHs from 3 to 6. Due to its amphoteric nature, Pb is leachable at pHs of approximately 10 or more, with leachate concentrations of about 3 and 3-10mg/L for the fly ash and bottom ash, respectively, much higher than for Zn and Cu. Pb concentrations for most leaching solutions were 1 and 3mg/L for the fly ash and bottom ash, respectively. Zn, and Cu leached at low concentrations for solutions of pH 3-6. Na and K ions leached at high concentrations of approximately 5000 mg/L in the first batch leaching test, decreasing to 10mg/L by the fourth leach. Ca and Mg ions leached more gradually than Na and K. Cl(-) and SO(4)(2+) ions were the major anions in the MSW ash. The high pH and cation leaching are expected to have negative impacts on the performance of clay liners.     

Study on 14C-BHA absorption and distribution in rat

BHA was administered to rats at doses of 5 or 500 mg/kg for seven days. ¹⁴C-BHA absorption was investigated on the eighth day and compared with animals receiving a single dose of 5 or 500 mg/kg BHA. Absorption of ¹⁴C-BHA was proportionately greater at the high dose rats. ¹⁴C distribution was 3–6 times higher in the forestomach than in the pyloric region of the stomach. The urinary excretion of BHA conjugates was not dependent on pretreatment with BHA or on the dose.     

A practical and simple method in fractional determination of ambient forms of mercury in air

A collecting method to prepare a fractional determination of ambient forms of mercury in air is proposed. Particulate mercury is collected by a glass fiber filter. Sequential trap tubes consist of four long and slender quartz tubes, in which the Chromosorb W treated with HC$\text{l}$ gas for Hg(II), the Chromosorb W treated with 0.1 M NaOH for methylmercury, the silver-wire tip for metallic mercury and the gold plate tip for dimethylmercury are packed. The collection efficiency for these trap tubes was in the range of about 85 ～ 100% at the μg or ng concentration level. With this method, the air was collected by suction at the rate of 1.5 $\text{l}$/min. for about five hours, the detection limit being 0.2 ng Hg/m³. The results indicate that the regional distribution of total mercury in air was considerably greater in the volcanic and hot spring regions. Mercury species was found to be mostly Hg(II), followed by metallic mercury, methylmercury, dimethylmercury and particulate mercury in this order.     

Analysis of the migration of instantaneously injected cesium in artificial fractures of Lac du Bonnet granite, Manitoba, Canada

Breakthrough curves of ¹³⁷Cs and tritiated water injected instantaneously into artificial fractures in Lac du Bonnet granite were analyzed using the analytical solution for a single rock-fracture system and assuming the linear sorption isotherm of the solute. Parameters of nuclide diffusion and sorption in rock matrices, obtained by fitting, varied depending on the flow velocity in the fractures. According to theoretical calculations, different fracture flow velocities lead to different diffusion distances of nuclides in matrices at the same injection volume. As microscopic inhomogeneity is considered to exist in the rock matrix, the average diffusion-sorption characteristics of the matrix within the diffusion distance may have varied with the fracture flow velocity. Surface sorption was marked in fractures that had relatively high matrix sorption-diffusion capacities. The phenomenon was interpreted using the theoretical relationships developed between the surface sorption, matrix sorption and pore diffusion coefficient, and the porosity of matrices.The effect of the nonlinear sorption of solute was examined by numerically solving model equations that incorporate the nonlinear isotherm. This incorporation may contribute to the reduction of deviations between theoretical and experimental BTC's.     

Extinction-effective population index: incorporating life-history variations in population viability analysis

Viability status of populations is a commonly used measure for decision-making in the management of populations. One of the challenges faced by managers is the need to consistently allocate management effort among populations. This allocation should in part be based on comparison of extinction risks among populations. Unfortunately, common criteria that use minimum viable population size or count-based population viability analysis (PVA) often do not provide results that are comparable among populations, primarily because they lack consistency in determining population size measures and threshold levels of population size (e.g., minimum viable population size and quasi-extinction threshold). Here I introduce a new index called the "extinction-effective population index," which accounts for differential effects of demographic stochasticity among organisms with different life-history strategies and among individuals in different life stages. This index is expected to become a new way of determining minimum viable population size criteria and also complement the count-based PVA. The index accounts for the difference in life-history strategies of organisms, which are modeled using matrix population models. The extinction-effective population index, sensitivity, and elasticity are demonstrated in three species of Pacific salmonids. The interpretation of the index is also provided by comparing them with existing demographic indices. Finally, a measure of life-history-specific effect of demographic stochasticity is derived.     

Simultaneous determination of atmospheric sulfur and nitrogen oxides using a battery-operated portable filter pack sampler

We developed a method to analyze atmospheric SO(x) (particulate SO(4)(2-)+ gaseous SO(2)) and NO(x) (NO + NO(2)) simultaneously using a battery-operated portable filter pack sampler. NO(x) determination using a filter pack method is new. SO(x) and NO(x) were collected on a Na(2)CO(3) filter and PTIO (2-phenyl-4,4,5,5-tetramethylimidazoline-3-oxide-1-oxyl) + TEA (triethanolamine) filters (6 piled sheets), respectively. Aqueous solutions were then used to extract pollutants trapped by the filters and the resulting extracts were pre-cleaned (e.g. elimination of PTIO) and analyzed for sulfate and nitrite by ion chromatography. Recoveries of SO(2) and NO(x) from standard pollutant gases and consistency of the field data with those from other instrumental methods were examined to evaluate our method. SO(x) and NO(x) could be analyzed accurately with determination limits of 0.2 ppbv and 1.0 ppbv (as daily average concentrations), respectively. The sampler can determine SO(x) and NO(x) concentrations at mountainous or remote sites without needing an electric power supply.     

Effect of ZnCl<Subscript>2</Subscript> impregnation ratio on pore structure of activated carbons prepared from cattle manure compost: application of N<Subscript>2</Subscript> adsorption-desorption isotherms

Activated carbons were prepared from cattle manure compost (CMC) by ZnCl₂ activation with various ZnCl₂/CMC mass ratios. Based on the N₂ adsorption-desorption isotherms, mathematical models including the Dubinin-Radushkevich (DR) equation, the α_s plot, and the Horvath-Kawazoe method were used to analyze the pore structural characteristics of the prepared activated carbons. It was found that for carbons possessing both micro-and mesopores, the DR method provided a more accurate estimation than the α_s method for the extent of microporosity. The effect of the ZnCl₂ impregnation ratio on the pore structure was discussed using the DR method. The results revealed that pore evolution involved three distinct regions with increases in the amount of impregnated ZnCl₂: raising the ZnCl₂/CMC mass ratio from 0.00 to 0.50 resulted in a 19-fold increase in micropore volume (V_me ^D) but caused no change in the mesopore volume (V_me ^D); increasing the ZnCl₂/CMC mass ratio from 0.50 to 1.00 led to an increment in V_mi ^D of about 50% and in V_me ^D of 170%; while raising the ratio from 1.50 to 2.50 caused a slight decrease in V_mi ^D but a 200% increment in the value of V_me ^D.     

Studies on the coupling product between oxidation products derived from pentachlorophenol and cyclodextrins

The coupling products (CPs), which were formed via the peroxosulfate catalyzed oxidation of pentachlorophenol (PCP) with iron(III)-tetrakis(sulfonatophenyl)porphyrin (Fe(III)-TPPS) in the presence of hydroxypropyl-beta -cyclodextrin (HP-beta -CD) or HP-gamma -CD, were separated by ultrafiltration from the reaction mixture. When the percentages of chlorine species in the reaction mixture were calculated from the concentrations of organic chlorine in the reaction mixture and CPs, 10-25% of chlorine species in the reaction mixture was organic chlorine that was incorporated into CDs. Analyses of the CPs by pyrolysis-GC/MS (Py-GC/MS) and 13C NMR showed that the PCP-derived products were covalently incorporated into the CDs. To evaluate the acute toxicity of the CPs, a Microtox test was examined. Toxicities of the CPs were reduced slightly, compared to the controls (PCP alone and PCP + reaction blanks). In the reaction blanks, mesaconic acid (MA) moieties were detected as a result of the oxidation of CDs in the absence of PCP. Thus, factors in the toxicities, detected in the CPs, can be attributed to the oxidation products derived from CDs, such as MA, as well as the PCP-derived products incorporated into the CDs.     

Effect of humic acids on the toxicity of pollutants to Chlamydomonas reinhardtii: Investigation by a microscale algal growth inhibition test

Dissolved humic substances (DHSs) are the major components of organic matter in the aquatic environment. DHSs are well known to considerably affect the speciation, solubility, and toxicity of a wide variety of pollutants in the aquatic environment. In this study, the effects of the toxicity of heavy metals and hydrophobic organic pollutants (HOPs) on Chlamydomonas reinhardtii in the presence of humic acid (HA) were examined by a microscale algal growth inhibition (μ-AGI) test based on spectrophotometric detection. To clarify the relationship between the chemical properties of HAs and the toxicity change of pollutants, eight HAs from different sources were prepared and used. HAs were responsible for mitigating the toxicity of Hg, Cu, pesticides (γ-HCH, 2,4-D, and DDT), and polycyclic aromatic hydrocarbons (PAHs) such as naphthalene (Nap), anthracene (Ant), and benzo[a]pyrene (BaP). In particular, an approximately 100-fold decrease in the toxicity of BaP was observed in the presence of 10 ppm HAs extracted from tropical peat. The results indicated that the carboxylic group content and the HA molecular weight are correlated to the changes in the heavy metal toxicity. For HOPs, the aromaticity and polarity of HAs are crucial for mitigating their toxicity. Furthermore, it was clearly shown that the lake water including a high concentration of DHSs collected from Central Kalimantan, Indonesia, reduced the toxicity of Hg and γ-HCH on Chlamydomonas reinhardtii.

Graphical abstract