Design,Modelling and Assessment of Emission Scenarios Resulting from a Network of Wood Biomass Boilers

The use of wood biomass as a fuel for domestic and industrial heating systems allows for a reduction of CO₂ emissions at a global scale, but it may also result in worse local air quality conditions, due to their emissions of particulate matter. The aim of this study is to assess the actual trend of atmospheric pollution in a study area, assuming that all heating systems are replaced by small size biomass boilers linked to the buildings through district heating network. Ground level concentrations of particulate matter, emitted by different heating systems, are therefore evaluated through numerical simulations performed by means of an atmospheric dispersion model (Sirane). As a first step, we have compared the environmental impact of a woodchip boilers network with that given by the use of traditional heating systems, i.e. wood stoves and natural gas boilers. As a second step, we have analysed the impact of such a network taking into account different emission scenarios, related to different boilers operating conditions. Results show that the environmental performances of a woodchip boilers network can be optimized by combining it with other renewable sources of energy devoted to the supply of hot water. The adopted analysis methodology can be applied to other real or hypothetic punctual sources on the territory.     

Estimation of PCDD/F distribution and fluxes in the Venice Lagoon,Italy: combining measurement and modelling approaches

The available experimental information on the occurrence of PCDD/Fs in the Venice Lagoon, Italy, was compiled and used to calculate fugacities for the environmental compartments of sediment, suspended particulate matter (SPM), water and air and then used to estimate fugacity ratios and assess the likely net direction of flux between media. The bottom sediment: SPM fugacity ratios for different PCDD/Fs indicate conditions close to equilibrium, suggestive of the close coupling of SPM with re-suspended sediment. Sediment/water and the sediment/air fugacity ratios suggest that net flux directions vary depending on the congener and the location within the lagoon. Net sediment-water-air movement (i.e. re-mobilisation/volatilisation) is suggested for the lighter congeners from the industrial canals, where the highest PCDD/F concentrations in the lagoon occur. The tendency to volatilise increases with decreasing congener molecular weight. In contrast, net deposition (air-water-sediment) appears to be occurring for the heaviest (hepta- and octa-) substituted PCDD/Fs. OCDF represents a marker of the industrial district of the lagoon, decreasing in concentration and as a fraction of total PCDD/Fs with increasing distance. The fugacity-based quantitative water air sediment interaction (QWASI) mass-balance model was applied to the central part of the lagoon. The key parameters for the determination of the model output, identified by a sensitivity analysis, were: the sediment active depth, the sediment re-suspension and deposition rates, and the total input of PCDD/Fs to the system. The QWASI model also indicates the tendency for the lighter PCDD/Fs to be released from surface sediment to the water column.     

EPR monitoring of the bioavailability of an organic xenobiotic (4-hydroxy-TEMPO) in model clay suspensions and pastes

Electron paramagnetic resonance spectroscopy is used to monitor the bioavailability of a nitroxide spin probe, 4-hydroxy-Tempo or Tempol, in Ca-hectorite suspensions and pastes, to bacteria capable of degrading this probe co-metabolically. In nutrient solutions with an initial probe concentration of 1.2 mM and in the absence of hectorite, bacteria are able to denature Tempol and eliminate its paramagnetic signal within 48 h. In the presence of hectorite and after flocculation, the effect of bacteria is significantly delayed, but almost complete denaturation still occurs, after roughly 120 h. When hectorite is added but the bacterial/clay suspension is not centrifuged, Tempol denaturation levels off after about 24 h and reaches a plateau with approximately 45% of Tempol remaining. This plateau does not constitute evidence of limited bioavailability, as is widely assumed, since subsequent addition of nutrients causes the denaturation reaction to proceed to a second plateau, with merely 10% of Tempol remaining.     

Reduction of silver solubility by humic acid and thiol ligands during acanthite (beta-Ag2S) dissolution

Precipitation of highly insoluble metal sulfide minerals like acanthite (beta-Ag2S) or red cinnabar (HgS) is in principle an effective means to reduce metal availability and toxicity in contaminated soils. Unfortunately, experiments have shown that red cinnabar may be solubilized in the presence of dissolved organic matter or thiol ligands. To determine whether the same applies to acanthite, a laboratory synthesized beta-Ag2S mineral was incubated for up to 3 weeks in the presence of KNO3, dissolved humic acids, cysteine, methionine and thiosulfate. XPS analysis identified Ag2O (52%), Ag2SO4 (8%) and Ag2S (40%) on the particle surfaces. Ag was released into solution in the presence of KNO3 and methionine, presumably from mixed-oxidation surface layers. Contrary to earlier results with cinnabar, however, humic acids reduced Ag concentrations in solution by about 75%, and cysteine and thiosulfate, each containing a free -SH functional group, almost completely suppressed Ag release into solution.     

Evaluation of fast atmospheric dispersion models in a regular street network

Environmental Fluid Mechanics - The need to balance computational speed and simulation accuracy is a key challenge in designing atmospheric dispersion models that can be used in scenarios where...     

Rapid analysis of neonicotinoid insecticides in guttation drops of corn seedlings obtained from coated seeds

Regarding the hypothesis that neonicotinoid insecticides used for seed coating of agricultural crops - mainly corn, sunflower and seed rape - are related to the extensive death of honey bees, the phenomenon of corn seedling guttation has been recently considered as a possible route of exposure of bees to these systemic insecticides. In the present study, guttation drops of corn plants obtained from commercial seeds coated with thiamethoxam, clothianidin, imidacloprid and fipronil have been analyzed by an optimized fast UHPLC-DAD procedure showing excellent detection limits and accuracy, both adequate for the purpose. The young plants grown both in pots - in greenhouse - and in open field from coated seeds, produced guttation solutions containing high levels of the neonicotinoid insecticides (up to 346 mg L(-1) for imidacloprid, 102 mg L(-1) for clothianidin and 146 mg L(-1) for thiamethoxam). These concentration levels may represent lethal doses for bees that use guttation drops as a source of water. The neonicotinoid concentrations in guttation drops progressively decrease during the first 10-15 days after the emergence of the plant from the soil. Otherwise fipronil, which is a non-systemic phenylpyrazole insecticide, was never detected into guttation drops. Current results confirm that the physiological fluids of the corn plant can effectively transfer neonicotinoid insecticides from the seed onto the surface of the leaves, where guttation drops may expose bees and other insects to elevated doses of neurotoxic insecticides.     

Drivers of broadleaved evergreen species spread into deciduous forests in the southern Swiss Alps

Regional Environmental Change - The spread of non-native species into natural communities is a noticeable phenomenon linked to global change. Drivers of such invasions, however, may differ...     

Isolation of fetal cells from transcervical samples by micromanipulation: Molecular confirmation of their fetal origin and diagnosis of fetal aneuploidy

Transcervical cell (TCC) samples have been shown to contain fetal cells amenable to molecular analysis. However, the presence of ‘contaminating’ maternal cells limits their use for prenatal diagnoses. In this report we show that clumps of fetal cells can be isolated from transcervical samples by micromanipulation and tested by fluorescence in situ hybridization (FISH) and polymerase chain reaction (PCR). Out of 129 clumps, isolated from mucus aspirates and transcervical lavages from 29 patients, 29 clumps from 11 patients were found to be exclusively of fetal origin as judged by the detection of chromosome 21-specific polymorphic DNA markers and Y-derived DNA sequences by PCR and FISH. One case of a male triploid fetus, diagnosed by the analysis of TCC samples obtained by mucus aspiration and lavage, was confirmed by testing clumps of cells isolated by micromanipulation.