Assessing the impact of weather events at mid-latitudes on the atmospheric transport of chemical pollutants using a 2-dimensional multimedia meteorological model

We investigate the long-range transport potential (LRTP) of five different classes of hypothetical chemical pollutants (volatile, multimedia, semivolatile, particle-associated and hydrophilic) during a low pressure weather event using a novel 2 (x- and z-axis)-Dimensional Multi-Media Meteorological Model (2D4M). The atmosphere (z-axis) is described by three atmospheric layers, where two layers constitute the boundary layer and the third layer the free troposphere. The 2D4M can describe distinct weather events on a regional scale and calculate the LRTP of chemicals as a function of time during these events. Four weather factors are used to model weather events and their influence on the atmospheric transport of chemicals: (1) temperature, (2) wind speed and mixing dynamics of the troposphere, (3) hydroxyl radical concentrations and (4) precipitation. We have modeled the impact of variability in each of these factors on LRTP of pollutants during a front event associated with a low pressure period that interrupts a dominant high pressure system. The physico-chemical properties of the pollutant determine which specific weather factors contribute most to variability in transport potential during the event. Volatile and multimedia chemicals are mainly affected by changing atmospheric mixing conditions, wind speeds and OH radical concentrations, while semivolatile substances are also affected by temperature. Low-vapor-pressure pollutants that are particle-associated, and water-soluble pollutants are most strongly affected by precipitation. Some chemical pollutants are efficiently transported from the boundary layer into the upper troposphere during the modeled low pressure event and are transported by much higher wind speeds than in the boundary layer. Our model experiments show that the transport potential of volatile, multimedia and semivolatile compounds is significantly increased during a front event as a result of efficient tropospheric mixing and fast wind speeds in the upper troposphere, whereas low-volatility and hydrophilic chemicals are largely scavenged from the atmosphere. In future LRTP assessment of chemical contaminants as required by the Stockholm Convention and the convention on long-range transboundary air pollution, it is therefore advised to prioritize volatile, multimedia and semivolatile chemicals that are identified in initial screening.     

Perceptions of climate change,multiple stressors and livelihoods on marginal African coasts

Studies of multiple stressors in Africa often focus on vulnerable inland communities. Rising concentrations of the world’s poor live in coastal rural–urban areas with direct dependencies on marine as well as terrestrial ecosystem goods and services. Using participatory methods we elicited perceptions of stressors and their sources, impacts and consequences held by coastal communities in eastern Africa (Mtwara in Tanzania and Maputo in Mozambique). Respondent-informed timelines suggest wars, economic policies and natural increase have led to natural resource-dependent populations in marginal, previously little-inhabited lowland coastal areas. Respondents (n = 91) in interviews and focus groups rank climate stressors (temperature rise/erratic rain) highest amongst human/natural stressors having negative impacts on livelihoods and wellbeing (e.g., cross-scale cost of living increases including food and fuel prices). Sources of stress and impacts were mixed in time and space, complicating objective identification of causal chains. Some appeared to be specific to coastal areas. Respondents reported farms failing and rising dependence on stressed marine resources, food and fuel prices and related dependence on traders and credit shrunk by negative global market trends. Development in the guise of tourism and conservation projects limited access to land–sea livelihoods and resources in rural–urban areas (coastal squeeze). Mental modelling clarified resource user perceptions of complex linkages from local to international levels. We underline risks of the poor in marginal coastal areas facing double or multiple exposures to multiple stressors, with climate variability suggesting the risks of climate change.     

Electrolytic trichloroethene degradation using mixed metal oxide coated titanium mesh electrodes

Electrochemical systems provide a low cost, versatile, and controllable platform to potentially treat contaminants in water, including chlorinated solvents. Relative to bare metal or noble metal amended materials, dimensionally stable electrode materials such as mixed metal oxide coated titanium (Ti/MMO) have advantages in terms of stability and cost, important factors for sustainable remediation solutions. Here, we report the use of Ti/MMO as an effective cathode substrate for treatment of trichloroethene (TCE). TCE degradation in a batch reactor was measured as the decrease of TCE concentration over time and the corresponding evolution of chloride; notably, this occurred without the formation of commonly encountered chlorinated intermediates. The reaction was initiated when Ti/MMO cathode potentials were less than -0.8 V vs. the standard hydrogen electrode, and the rate of TCE degradation increased linearly with progressively more negative potentials. The maximum pseudo-first-order heterogeneous rate constant was approximately 0.05 cm min(-1), which is comparable to more commonly used cathode materials such as nickel. In laboratory-scale flow-though column reactors designed to simulate permeable reactive barriers (PRBs), TCE concentrations were reduced by 80-90%. The extent of TCE flux reduction increased with the applied potential difference across the electrodes and was largely insensitive to the spacing distance between the electrodes. This is the first report of the electrochemical reduction of a chlorinated organic contaminant at a Ti/MMO cathode, and these results support the use of this material in PRBs as a possible approach to manage TCE plume migration.     

Evaluation of vacuum filter sock surface sample collection method for Bacillus spores from porous and non-porous surfaces

Vacuum filter socks were evaluated for recovery efficiency of powdered Bacillus atrophaeus spores from two non-porous surfaces, stainless steel and painted wallboard and two porous surfaces, carpet and bare concrete. Two surface coupons were positioned side-by-side and seeded with aerosolized Bacillus atrophaeus spores. One of the surfaces, a stainless steel reference coupon, was sized to fit into a sample vial for direct spore removal, while the other surface, a sample surface coupon, was sized for a vacuum collection application. Deposited spore material was directly removed from the reference coupon surface and cultured for enumeration of colony forming units (CFU), while deposited spore material was collected from the sample coupon using the vacuum filter sock method, extracted by sonication and cultured for enumeration. Recovery efficiency, which is a measure of overall transfer effectiveness from the surface to culture, was calculated as the number of CFU enumerated from the filter sock sample per unit area relative to the number of CFU enumerated from the co-located reference coupon per unit area. The observed mean filter sock recovery efficiency from stainless steel was 0.29 (SD = 0.14, n = 36), from painted wallboard was 0.25 (SD = 0.15, n = 36), from carpet was 0.28 (SD = 0.13, n = 40) and from bare concrete was 0.19 (SD = 0.14, n = 44). Vacuum filter sock recovery quantitative limits of detection were estimated at 105 CFU m(-2) from stainless steel and carpet, 120 CFU m(-2) from painted wallboard and 160 CFU m(-2) from bare concrete. The method recovery efficiency and limits of detection established in this work provide useful guidance for the planning of incident response environmental sampling for biological agents such as Bacillus anthracis.     

Environmental forensics: an emerging discipline within UK higher education?

Environmental forensics is an established discipline in North America, but has yet to make an impact within Europe and more specifically within the UK. In this paper we explore the reasons for this and explore the nature and fundamental philosophy that underlies this discipline. Case studies can be used to explore the complexity that can be associated with an environmental forensic investigation and we argue that there is a demand for professionals with skills in forensic practice within the environmental sector today. The paper finishes by suggesting that environmental forensics is a discipline of its moment within Europe for which the Higher Education sector must now cater.     

Pricing Policy for Tourism in Protected Areas: Lessons from Komodo National Park, Indonesia

Abstract: Protected areas are under increasing pressure to provide economic justification for their existence, particularly in developing countries where demand for land and natural resources is high. Nature-based tourism offers a mechanism to generate substantial benefits from protected areas for both governments and local communities, and ecotourism is increasingly promoted as a sustainable use of protected areas. The extent to which ecotourism offsets the costs of a protected area has rarely been examined. We used financial data from Komodo National Park, Indonesia, and a willingness-to-pay questionnaire of independent visitors to (1) examine the financial contribution of tourism in offsetting the costs of tourism and wider management and (2) assess the effect of hypothetical fee increases on park revenues, visitation patterns, and local economies. Although only 6.9% of park management costs were recovered, visitors were willing to pay over 10 times the current entrance fee, indicating a substantial potential for increased revenue. The potential negative effect of large fee increases on visitor numbers and the resultant effect on local economic benefits from tourism may limit the extent to which greater financial benefits from Komodo National Park (KNP) can be realized. Our results suggest that a moderate, tiered increase in entrance fees is most appropriate, and that partial revenue retention by KNP would help demonstrate the conservation value of tourism to both visitors and managers and has the potential to increase visitors' willingness to pay.     

Evolving Pb isotope signatures of London airborne particulate matter (PM 10)-constraints from on-filter and solution-mode MC-ICP-MS

Pb isotope compositions of biologically significant PM(10) atmospheric particulates from a busy roadside location in London UK were measured using solution- and laser ablation-mode MC-ICP-MS. The solution-mode data for PM(10) sampled between 1998-2001 document a dramatic shift to increasingly radiogenic compositions as leaded petrol was phased out. LA-MC-ICP-MS isotope analysis, piloted on a subset of the available samples, is shown to be a potential reconnaissance analytical technique. PM(10) particles trapped on quartz filters were liberated from the filter surface, without ablating the filter substrate, using a 266 nm UV laser and a dynamic, large diameter, low-fluence ablation protocol. The Pb isotope evolution noted in the London data set obtained by both analytical protocols is similar to that observed elsewhere in Western Europe following leaded petrol elimination. The data therefore provide important baseline isotope composition information useful for continued UK atmospheric monitoring through the early 21(st) century.     

PFOS or PreFOS? Are perfluorooctane sulfonate precursors (PreFOS) important determinants of human and environmental perfluorooctane sulfonate (PFOS) exposure?

The extent to which perfluorooctanesulfonate precursors (PreFOS) play a role in human or environmental exposure to perfluorooctanesulfonate (PFOS) is not well characterized. The diversity of manufactured PreFOS and its degradation products (e.g. C(8)F(17)SO(2)R and C(8)F(17)SO(2)NR'R', where R is H or F, and R' and R' are various) has made it difficult to track their fate. Temporal trends of PFOS in both humans and wildlife are discrepant, thus it is difficult to predict future exposure, and hypotheses about the role of PreFOS have been raised. Although abiotic degradation of commercially important PreFOS materials requires further research, current data suggest that the yield of PFOS is negligible or minor. On the other hand, in vivo biotransformation of PreFOS yields PFOS as the major metabolite, and >32% yields have been observed. In Canadians, exposure to PreFOS was equivalent or greater than direct PFOS exposure prior to 2002. In most ocean water, PFOS is dominant to PreFOS, but in the oceans east of Greenland there may be more PreFOS than PFOS, consistent with the fact that whales and humans in this region also show evidence of substantial PreFOS exposure. Quantitative assessments of PFOS body-burdens coming from PreFOS are complicated by the fact that PreFOS partitions to the cellular fraction of blood, thus biomonitoring in serum under predicts PreFOS relative to PFOS. Many unknowns exist that prevent accurate modelling, thus analytical methods that can distinguish directly manufactured PFOS, from PFOS that has been biotransformed from PreFOS, should be applied in future human and environmental monitoring. Two new source tracking principles are presented and applied to human serum.     

Exploring Environmental and Economic Trade-offs Associated with Aggregate Recycling from Decommissioned Forest Roads

Forest road decommissioning is a pro-active mechanism for preventing future habitat degradation and for increasing the likelihood of endangered salmonid survival in the western U.S. High implementation costs however preclude many desirable projects from being undertaken, especially on federally owned land. Previous research and real-world applications have demonstrated the cost savings potential of reusing aggregate recovered from forest roads during decommissioning. These cost savings can effectively subsidize decommissioning projects, suggesting an economic benefit associated with improving environmental benefit. We present a mixed integer, multiple objective formulation to identify the efficient trade-off surface between conflicting economic and environmental criteria, where environmental benefit is defined as the hazard weighted length of roads decommissioned. We compare nondominated frontiers identified with and without the opportunity to recycle aggregate. Our results suggest that aggregate recycling promotes a synergistic relationship between cost savings (subsidy) and environmental performance, where subsidies generally increase with increasing environmental performance. Effective subsidy values can reach 31% of total expenditure, at the maximum level of environmental benefit. Transportation managers are therefore able to recover and reuse a nonrenewable resource, while at the same time promoting economic and environmental efficiency.