Cougar Dispersal Patterns, Metapopulation Dynamics, and Conservation

Abstract: We examined cougar (   Puma concolor ) dispersal, emigration, and immigration in the San Andres Mountains, New Mexico, from 1985 to 1995 to quantify the effects of dispersal on the local population and surrounding subpopulations. We captured, tagged, and radio-collared animals to detect the arrival of new immigrants and dispersal characteristics of progeny. We found that cougars in southern New Mexico exhibited a metapopulation structure in which cougar subpopulations were separated by expanses of noncougar habitat and linked by dispersers. Of 43 progeny (n = 20 males , 23 females ) studied after independence, only 13 females exhibited philopatric behavior. Males dispersed significantly farther than females, were more likely to traverse large expanses of noncougar habitat, and were probably most responsible for nuclear gene flow between habitat patches. We estimated that an average of 8.5 progeny (i.e., cougars born in the study area) successfully emigrated from and 4.3 cougars successfully immigrated to the San Andres Mountains each year. Concurrently, an average of 4.1 progeny were recruited into the San Andres cougar population. Protected cougar subpopulations can contribute to metapopulation persistence by supplying immigrants to surrounding subpopulations that are affected by fragmentation or offtake by humans. Cougar population dynamics and dispersal behavior dictate that cougar management and conservation should be considered on a regional scale.     

Potential of fly ash for neutralisation of acid mine drainage

Lignite (PK), bituminous (FI) and biomass (SE) fly ashes (FAs) were mineralogically and geochemically characterised, and their element leachability was studied with batch leaching tests. The potential for acid neutralisation (ANP) was quantified by their buffering capacity, reflecting their potential for neutralisation of acid mine drainage. Quartz was the common mineral in FAs detected by XRD with iron oxide, anhydrite, and magnesioferrite in PK, mullite and lime in FI, and calcite and anorthite in SE. All the FAs had high contents of major elements such as Fe, Si, Al and Ca. The Ca content in SE was six and eight times higher compared to PK and FI, respectively. Sulphur content in PK and SE was one magnitude higher than FI. Iron concentrations were higher in PK. The trace element concentrations varied between the FAs. SE had the highest ANP (corresponding to 275 kg CaCO₃?tonne^?1) which was 15 and 10 times higher than PK and FI, respectively. The concentrations of Ca²⁺, SO₄ ^2?, Na⁺ and Cl^? in the leachates were much higher compared to other elements from all FA samples. Iron, Cu and Hg were not detected in any of the FA leachates because of their mild to strong alkaline nature with pH ranging from 9 to 13. Potassium leached in much higher quantity from SE than from the other ashes. Arsenic, Mn and Ni leached from PK only, while Co and Pb from SE only. The concentrations of Zn were higher in the leachates from SE. The FAs used in this study have strong potential for the neutralisation of AMD due to their alkaline nature. However, on the other hand, FAs must be further investigated, with scaled-up experiments before full-scale application, because they might leach pronounced concentrations of elements of concern with decreasing pH while neutralising AMD.     

Monitoring of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere of southern Luxembourg using XAD-2 resin-based passive samplers

XAD-2 resin-based passive samplers (PAS) with dimensions adapted to 100 mL accelerated solvent extraction cells were used to study the temporal and spatial variations of 17 PAHs on five sites in the atmosphere of southern Luxembourg. This new design allowed extracting the PAS without emptying the resin from the shelter. PAH analyses were done with gas chromatography–tandem mass spectrometry. PAS were deployed for 1 year with varying sampling periodicities, and 16 PAHs were detected with concentrations ranging from 1 ng/PAS for chrysene to 9,727 ng/PAS for naphthalene. The PAS were found adapted to the monitoring of temporal and spatial variations for lightweight PAHs (up to four aromatic rings) though not for heavy PAHs with five aromatic rings or more, as these compounds are preferably in the particle phase of the atmosphere and the amount of these PAHs trapped on the PAS will be too low.     

Technical efficiency of Kenya’s smallholder food crop farmers: do environmental factors matter?

Smallholder agriculture dominates Kenya’s agricultural landscape, accounting for 75 % of total agricultural output and 70 % of the marketed agricultural produce. As a result, the Government of Kenya, with the support of development partners, has invested in production and dissemination of productivity-enhancing technologies such as high-yielding varieties and inorganic fertilizers targeting the smallholders. Adoption of these technologies has remarkably improved, especially in the maize sub-sector. However, productivity has been declining or, at best, stagnating. Productivity is attributable to not only technological improvements but also technical efficiency. Consequently, this study sought to determine the technical efficiency of the country’s smallholder food crop farmers and establish how it correlates with environmental factors. The study used a two-stage nonparametric approach on household panel data to estimate the efficiency levels of the smallholders and establish the sources of its variation across households. Controlling for endogeneity and incorporating geographic information system-derived measures of environmental factors in the analysis, the study finds that technical efficiency differentials are influenced by environmental factors, production risks and farmer characteristics. The policy implication is that the country has room to improve agricultural productivity by addressing environmental and farm-level constraints. Viable options include switching from rain-fed to irrigated agriculture, entrenching land tenure security, improving transport network among farm communities and setting up smallholder credit schemes.     

Air quality assessment by tree bark biomonitoring in urban, industrial and rural environments of the Rhine Valley: PCDD/Fs, PCBs and trace metal evidence

Tree barks were used as biomonitors to evaluate past atmospheric pollution within and around the industrial zones of Strasbourg (France) and Kehl (Germany) in the Rhine Valley. The here estimated residence time for trace metals, PCBs and PCDD/Fs in tree bark is >10 years. Thus, all pollution observed by tree bark biomonitoring can be older than 10 years. The PCB baseline concentration (sum of seven PCB indicators (Σ₇PCB_ind)) determined on tree barks from a remote area in the Vosges mountains is 4 ng g⁻¹ and corresponds to 0.36 × 10⁻³ ng toxic equivalent (TEQ) g⁻¹ for the dioxin-like PCBs (DL-PCBs). The northern Rhine harbor suffered especially from steel plant, waste incinerator and thermal power plant emissions. The polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/Fs) concentrations analyzed in tree barks from this industrial area range between 392 and 1420 ng kg⁻¹ dry-weight (dw) corresponding to 3.9 ng TEQ_PCDD/Fs kg⁻¹ to 17.8 ng TEQ_PCDD/Fs kg⁻¹, respectively. Highest PCDD/F values of 7.2 ng TEQ kg⁻¹ to 17.8 ng TEQ kg⁻¹ have been observed close to and at a distance of <2 km southwest of the chemical waste incinerator. However, very close to this incinerator lowest TEQ dioxin-like PCB (TEQ_DL-PCB) values of 0.006 ng TEQ g⁻¹ have been found. On the other hand close to and southwest and northeast of the steel plant the values are comparatively higher and range between 0.011 ng TEQ g⁻¹ and 0.026 ng TEQ g⁻¹. However, even stronger Σ₇PCB_ind enrichments have been observed at a few places in the city center of Kehl, where ΣDL-PCB values of up to 0.11 ng TEQ g⁻¹ have been detected. These enrichments, however, are the result of ancient pollutions since recent long-term measurements at the same sites indicate that the atmospheric PCB concentrations are close to baseline. Emissions from an old landfill of waste and/or great fires might have been the reasons of these PCB enrichments. Other urban environments of the cities of Kehl and Strasbourg show significantly lower Σ₇PCB_ind concentrations. They suffer especially from road and river traffic and have typically Σ₇PCB_ind concentrations ranging from 11 ng g⁻¹ to 29 ng g⁻¹. The PCB concentration of 29 ng g⁻¹ has been found in tree bark close to the railway station of Strasbourg. Nevertheless, the corresponding TEQ_DL-PCB are low and range between 0.2 × 10⁻³ ng TEQ g⁻¹ and 7 × 10⁻³ ng TEQ g⁻¹. Samples collected near road traffic are enriched in Fe, Sb, Sn and Pb. Cd enrichments were found close to almost all types of industries. Rural environments not far from industrial sites suffered from organic and inorganic pollution. In this case, TEQ_DL-PCB values may reach up to 58 × 10⁻³ ng TEQ g⁻¹ and the corresponding V, Cr, Co, Ni, and Cd concentrations are comparatively high.     

Multi-criteria evaluation technique for SFI site identification of NORMS and oil industry waste disposal – Possibilities in Kuwait

Waste generation and accumulating quantities of oil field waste are a matter of environmental concern. This study proposes the Slurry Fracture Injection (SFI) technique as an alternative waste disposal method. The slurried solids injection waste disposal method is environmentally secure and permanent, leaving no future liabilities that must be risk-evaluated or priced. An entire waste stream comprising ground solids and waste water can be injected into deep and hydraulically secure target strata with no contamination of potable water-bearing formations or formations outside the target zone that may contain resources (gas and oil). The slurry injection method can be used to clean and reclaim landfills, oil pits and granular waste dumps. This article proposes a two-tier screening method for evaluating the feasibility of this technique and the identification of suitable target zones. A stringent environmental and process control monitoring program should complement the planning and operational period to ensure environmental protection, waste containment, and regulatory HSE compliance.     

Wood bison population recovery and forage availability in northwestern Canada

Forage availability was assessed to determine sustainable stocking rates for eight broadly defined vegetation types (Treed Uplands, Treed Lowlands, Mixed Tall Shrub/Sedge, Closed-canopied Willow, and Open-canopied Willow, Meadow, Wetland Grass, Wetland Sedge) for use by wood bison (Bison bison athabascae), a threatened subspecies, in the Canadian boreal forest of northern Alberta. Clip plots (n=108) were used to sample peak availability of herbs and current annual growth of Salix spp. in late summer. Graminoid wetlands dominated by Carex atherodes, Carex aquatilis, Carex utriculata, Scolochloa festucacea, or Calamagrostis stricta produced 1975-4575 kg ha(-1) of fair to good quality forage, whereas treed stands produced < 250 kg ha(-1) of forb-dominated forage (>85% content), which was below a published 25% foraging efficiency threshold of 263 kg ha(-1) for bison. Upland forests that dominate the region produced < or = 1 animal unit day (AUD) of forage per hectare in summer. Most forest understory plants were of poor forage value, suggesting the potential sustainable stocking rate of such areas was actually < or = 0.3 AUD ha(-1), with even lower rates during winter due to snow cover. Herbaceous wetlands contained approximately 78 AUD ha(-1) of forage, but were considered largely unavailable in summer because of flooding and soft organic soils that make access difficult. Conversion of prime foraging habitat to agricultural land, forest expansion due to fire control, and a warmer and wetter climatic regime after the mid-1900s likely contributed to a regional reduction in carrying capacity. It is hypothesized that substantial recovery of the wood bison population toward historical levels will be constrained in northern Alberta by the availability of summer forage, and the limited extent of graminoid wetlands that provide winter foraging habitat.     

Impact of water saturation level on arsenic and metal mobility in the Fe-amended soil

The impact of water saturation level (oxidizing-reducing environment) on As and metal solubility in chromium, copper, arsenic (CCA)-contaminated soil amended with Fe-containing materials was studied. The soil was mixed with 0.1 and 1 wt% of iron grit (Fe(0)) and 1, 7 and 15 wt% of oxygen scarfing granulate (OSG, a by-product of steel processing). Solubility of As and metals was evaluated by a batch leaching test and analysis of soil pore water. Soil saturation with water greatly increased As solubility in the untreated as well as in the Fe-amended soil. This was related to the reductive dissolution of Fe oxides and increased concentration of As(III) species. Fe amendments showed As reducing capacity under both oxic and anoxic conditions. The cytotoxicity of the soil pore water correlated with the concentration of As(III). The Fe-treatments as well as water saturation of soil were less significant for the solubility of Cu, Cr and Zn than for As. The batch leaching test used for waste characterization substantially underestimated As solubility that could occur under water-saturated (anaerobic) conditions. In the case of soil landfilling, other techniques than Fe-stabilization of As containing soil should be considered.     

The social and scientific values that shape national climate scenarios: a comparison of the Netherlands,Switzerland and the UK

This paper seeks to understand why climate information is produced differently from country to country. To do this, we critically examined and compared the social and scientific values that shaped the production of three national climate scenarios in the Netherlands, Switzerland and the UK. A comparative analysis of documentary materials and expert interviews linked to the climate scenarios was performed. Our findings reveal a new typology of use-inspired research in climate science for decision-making: (i) innovators, where the advancement of science is the main objective; (ii) consolidators, where knowledge exchanges and networks are prioritised; and (iii) collaborators, where the needs of users are put first and foremost. These different values over what constitutes ‘good’ science for decision-making are mirrored in the way users were involved in the production process: (i) elicitation, where scientists have privileged decision-making power; (ii) representation, where multiple organisations mediate on behalf of individual users; and (iii) participation, where a multitude of users interact with scientists in an equal partnership. These differences help explain why climate knowledge gains its credibility and legitimacy differently even when the information itself might not be judged as salient and usable. If the push to deliberately co-produce climate knowledge is not sensitive to the national civic epistemology at play in each country, scientist–user interactions may fail to deliver more ‘usable’ climate information.