Production of activated carbons from waste tire--process design and economical analysis

The process design and economic analysis of process plants to produce activated carbons from waste tires and coal have been performed. The potential range of products from each process has been considered, namely for waste tire--pyro-gas, active carbon, carbon black and pyro-oil; for coal--pyro-gas and active carbons. Sensitivity analyses have been carried out on the main process factors; these are product price, production capacity, total production cost, capital investment and the tipping fee. Net present values for the two plants at various discount factors have been determined and the internal rates of return have been determined as 27.4% and 18.9% for the waste tire plant and the coal plant, respectively.     

Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption

Activated carbons were prepared from bagasse through a low temperature (160 degrees C) chemical carbonisation treatment and gasification with carbon dioxide at 900 degrees C. The merit of low temperature chemical carbonisation in preparing chars for activation was assessed by comparing the physical and chemical properties of activated carbons developed by this technique to conventional methods involving the use of thermal and vacuum pyrolysis of bagasse. In addition, the adsorption properties (acid blue dye) of these bagasse activated carbons were also compared with a commercial activated carbon. The results suggest that despite the high ash content of the precursor, high surface areas (614-1433 m2 g(-1)) and microporous (median pore size from 0.45 to 1.2 nm) activated carbons can be generated through chemical carbonisation and gasification. The micropore area of the activated carbon developed from chars prepared by the low temperature chemical carbonisation provides favourable adsorption sites to acid blue dye (391 mg g(-1) of carbon). The alkalinity of the carbon surface and total surface area were shown to have complementary effects in promoting the adsorption of acid blue dye. Adsorption of the anionic coloured component of the acid dye was shown to be promoted in carbon exhibiting alkaline or positively charged surfaces. This study demonstrates that activated carbons with high acid dye adsorption capacities can be prepared from high ash bagasse based on low temperature chemical carbonisation and gasification.     

The partitioning of sellafield-derived radiocaesium in scottish coastal sediments

Sequential leaching of Clyde Sea Area and Loch Etive sediments suggests that partitioning of Sellafield (formerly Windscale)-derived ¹³⁷Cs is related, to a larger than expected extent, to the concentration of sedimentary oxides, organics and, less importantly, carbonates. These components act to prevent ¹³⁷Cs release from clay mineral exchange sites. Leaching of wet sediments appears to provide quite different and presumably more realistic information on nuclide associations relative to that produced by leaching dry ground sediments. The latter ¹³⁷Cs partitioning data appear to overestimate the degree of ¹³⁷Cs fixation in these coastal deposits. Because of the observed partial association of ¹³⁷Cs with nonclay constituents, diagenetic remobilisation of the nuclide is in theory feasible and a preliminary study suggests its occurrence to a minor degree.     

PCDD/PCDF reduction by the co-combustion process

A novel process, termed the co-combustion process, has been developed and designed to utilise the thermal treatment of municipal solid waste (MSW) in cement clinker production and reduce PCDD/PCDF emissions. To test the conceptual design; detailed engineering design of the process and equipment was performed and a pilot plant was constructed to treat up to 40 tonnes MSW per day. The novel process features included several units external to the main traditional cement rotary kiln: an external calcinations unit in which the hot gas calcined the limestone thus making significant energy savings for this chemical reaction; the lime generated was used in a second chamber to act as a giant acid gas scrubber to remove SOx and particularly HCl (a source of chloride); an external rotary kiln and secondary combustion unit capable of producing a hot gas at 1200 degrees C; a gas cooler to simulate a boiler turbogenerator set for electricity generation; the incorporation of some of the bottom ash, calcined lime and dust collector solids into the cement clinker. A PCDD/PCDF inventory has been completed for the entire process and measured PCDD/PCDF emissions were 0.001 ng I-TEQ/Nm(3) on average which is 1% of the best practical means [Hong Kong Environmental Protection Department, 2001. A guidance note on the best practicable means for incinerators (municipal waste incineration), BPM12/1] MSW incineration emission limit values.     

Ozone uptake by citrus trees exposed to a range of ozone concentrations

The Citrus genus includes a large number of species and varieties widely cultivated in the Central Valley of California and in many other countries having similar Mediterranean climates. In the summer, orchards in California experience high levels of tropospheric ozone, formed by reactions of volatile organic compounds (VOC) with oxides of nitrogen (NO_x). Citrus trees may improve air quality in the orchard environment by taking up ozone through stomatal and non-stomatal mechanisms, but they may ultimately be detrimental to regional air quality by emitting biogenic VOC (BVOC) that oxidize to form ozone and secondary organic aerosol downwind of the site of emission. BVOC also play a key role in removing ozone through gas-phase chemical reactions in the intercellular spaces of the leaves and in ambient air outside the plants. Ozone is known to oxidize leaf tissues after entering stomata, resulting in decreased carbon assimilation and crop yield. To characterize ozone deposition and BVOC emissions for lemon (Citrus limon), mandarin (Citrus reticulata), and orange (Citrus sinensis), we designed branch enclosures that allowed direct measurement of fluxes under different physiological conditions in a controlled greenhouse environment. Average ozone uptake was up to 11 nmol s^?1 m^?2 of leaf. At low concentrations of ozone (40 ppb), measured ozone deposition was higher than expected ozone deposition modeled on the basis of stomatal aperture and ozone concentration. Our results were in better agreement with modeled values when we included non-stomatal ozone loss by reaction with gas-phase BVOC emitted from the citrus plants. At high ozone concentrations (160 ppb), the measured ozone deposition was lower than modeled, and we speculate that this indicates ozone accumulation in the leaf mesophyll.     

A tool to aid emergency managers and communities in appraising private dam safety and policy

Issues concerning dam safety and equitable sharing of catchment run-off are receiving more attention throughout the world. This paper assesses these matters in the context of Australia, and the need for policy responses. Landholders often overlook the common law obligation to review/design dams to current standards because of high costs, leaving them vulnerable to litigation if their dam fails. The paper reports on an innovative spillway design/review procedure, applicable to southeast Australia, but transferable to any region worldwide. Dam safety policy models and guidelines derived from international best practice are linked to the procedure and intended to aid government decision-making. The procedure minimises costs to landholders and provides an acceptable level of safety assurance to downstream communities. Also discussed are recent surveys testing community attitudes to the procedure and implemented dam safety and water allocation policies. These further guide any government wanting to implement this'integrated engineering and community partnerships'approach to preventing potential disasters due to private dam failure and achieving sustainable and safe water storage and use.     

Efficacy of Bacteroides measurements for reducing the statistical uncertainty associated with hydrologic flow and fecal loads in a mixed use watershed

This paper presents an analysis of the occurrence and uncertainty of source-specific Bacteroides and Escherichia coli in a stream in a mixed land-use watershed with human, cattle, and wildlife fecal inputs located in a karstic geologic region during baseflow conditions. The objectives of the study were to evaluate the occurrence, hydrologic significance, and source of fecal mass in the stream using assays for total Bacteroides (AllBac) and bovine-specific Bacteroides (BoBac), and then to compare these measurements with E. coli densities and loads. Samples were collected during baseflow conditions over several months at seven different main channel sites in the Stock Creek watershed, a 49.3 km2 basin located in Knoxville, TN (USA). We determined instantaneous loads for total fecal loads, bovine fecal loads, and E. coli from measured flow rates and the representative Bacteroides fecal masses and/or E. coli densities. The study indicated a strong correlation between total fecal load (kg d(-1)), bovine fecal load (kg d(-1)), E. coli load rate (CFU d(-1)), 7-d antecedent precipitation, and turbidity. The various datasets were used to establish parameter correlations and spatial dependencies throughout the watershed. The data analysis demonstrated two prevalent patterns throughout the watershed: (i) a runoff-dominated transport and occurrence; and (ii) potential groundwater-dominated transport and occurrence.     

Fixed bed adsorption for the removal of pollutants from water

The adsorption of phenol, p-chlorophenol and mercuric ions from aqueous solution onto activated carbon has been studied in fixed bed columns. The influence of varying parameters such as bed depth, solution flowrate and pollutant concentration has been studied. The Bed Depth Service Time has been used to analyse the experimental data and identify design correlations. Furthermore, an optimization procedure based on the Empty Bed Residence Time has been applied to the data.