A Proactive Approach Can Make Site Remediation Less Expensive

Without any incentive to clean up a contaminated site, remediation is often delayed until the site owner is compelled to act by regulatory agencies. In such a context, the selected technology is typically the one that will reach the remediation goals as quickly as possible. Unfortunately, this criterion is often met by overly expensive technologies, resulting in high and sometimes unaffordable total remediation costs, leading to a remediation with a negative net benefit. This study examines the effects of time constraint and benefit value on the optimal remediation strategy for a diesel-contaminated site. This strategy is developed using the technico-economic model METEORS, which takes into account the technology’s effectiveness, the uncertainty of the level of contamination, and the possibility of reducing this uncertainty through either an additional characterization (before selecting and applying a technology) or the monitoring of the remediation technology (during its use). Results of simulations with both economic and temporal constraints support a proactive approach to site remediation.     

Use of Physical Sciences in Support of Environmental Management

Offshore drilling for oil and gas has been conducted since the early 1900s. Oil and gas under the seabed continue to be an important part of the energy resources of the United States. The need to balance the value of these resources against the potential for environmental damage is an important concern. This article explains why and how the Minerals Management Service (MMS) of the US Department of the Interior uses research in physical sciences to help fulfill its environmental goals, and it provides background information on the role of physical sciences in decision-making for Outer Continental Shelf (OCS) oil, gas, and other minerals development. Established in the 1970s, the MMS Environmental Studies Program is a highly focused marine research program designed to provide the environmental information necessary for OCS energy and nonenergy minerals planning and development activities. The physical sciences research supported by MMS includes physical oceanography, oil-spill risk analyses, atmospheric sciences, and sand and gravel studies. Instead of giving a comprehensive review on physical sciences research in MMS, this article presents sample MMS studies and illustrates how these studies are utilized to support decision-making in environmental management.Published online Note: This version was published online in June 2005 with the cover date of August 2004.     

Editorial

Editorial Commentary

Editorial     

A Quantitative Safety Assessment Model For Transgenic Protein Products Produced In Agricultural Crops

Transgenic plants are now being used to develop pharmaceutical and industrial products in addition to their use in crop improvement. Using confinement requirements, these transgenic plants are grown and processed under conditions that prevent intermixing with commodity crops. Regulatory agencies in the United States have provided guidance of zero tolerance of these new industrial crops with commodity crops. While this is a worthy goal, it is theoretically unattainable. In spite of the best containment practices, there is a potential risk using any system of production due to unforeseen incidences including natural disasters or exposure to workers. The precautionary principle has been used for numerous regulated articles in addressing the potential risks of new products and technology based on a risk assessment in similar situations. We present here a risk assessment model that could be used as a start to develop an accepted model for the industry. The model is based on current risk models used for other regulated articles, but adapted for these types of products. This could be used to determine action levels in the event of an unintended exposure or to ensure that detection or confinement methods are adequate to avoid risks. As an example, aprotinin, a therapeutic protein now being produced in maize, was evaluated for potential risk to humans using this model.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

Thermal cracking of oils from waste plastics

Thermal cracking of decomposed waste plastic oil produces a good yield of olefins. The solvent extraction of such waste plastic oil seems to be efficient for increasing gas yields and recycling monomers. To assess the potential of monomer recovery from municipal waste plastics, the oils were cracked using a laboratory-scale quartz-tube reactor. The waste plastic oils were provided by two commercial plants of the Sapporo Plastic Recycle Co. and the Dohoh Recycle Center Co. in Japan. A model waste plastic oil made in a laboratory was also examined. Yields of ethene, propene, and other products were measured at different temperatures. Two-step pyrolysis reduces coking compared with the direct thermal degradation of plastics. The raffinates from waste plastic oils extracted by sulfolane were also cracked. The primary products were almost the same as those from nontreated oils. The maximum total gas yield was 78wt%–85wt% at 750°C, an increase of about 20wt% compared with that of nonextracted oil. Solvent extraction removes stable aromatic hydrocarbons such as styrene, which is more coked than cracked.     

Utilization of Photographs for Determining Impact Indicators for Trail Management

Indicators are a key component of resource management, but selecting them can be difficult and controversial. This study explores different methods for selecting impact indicators for management of trail conditions by comparing photo survey methods (PSM) with written survey methods (WSM). A total of 661 subjects participated in interviews conducted within Mudeung- Mountain Provincial Park in Kwang-ju, Korea. PSM explained variation in acceptability better than WSM. Six major photo components (in order of importance: area of large rocks on trail, area of wood steps, area of bare roots, area of bare soil, area of small stones, and area of stone steps) explained 84.7% of the variation in acceptability of trail management conditions. This study suggests that PSM can be a useful tool for selecting impact indicators. Supported by the grant of Post-Doctoral Program, Chonbuk National University (2001)     

A GIS Model of Subsurface Water Potential for Aquatic Resource Inventory,Assessment, and Environmental Management

Biological, chemical, and physical attributes of aquatic ecosystems are often strongly influenced by groundwater sources. Nonetheless, widespread access to predictions of subsurface contributions to rivers, lakes, and wetlands at a scale useful to environmental managers is generally lacking. In this paper, we describe a neighborhood analysis approach for estimating topographic constraints on spatial patterns of recharge and discharge and discuss how this index has proven useful in research, management, and conservation contexts. The Michigan Rivers Inventory subsurface flux model (MRI-DARCY) used digital elevation and hydraulic conductivity inferred from mapped surficial geology to estimate spatial patterns of hydraulic potential. Model predictions were calculated in units of specific discharge (meters per day) for a 30-m²-cell raster map and interpreted as an index of potential subsurface water flux (shallow groundwater and event through-flow). The model was evaluated by comparison with measurements of groundwater-related attributes at watershed, stream segment, and local spatial scales throughout Lower Michigan (USA). Map-based predictions using MRI-DARCY accounted for 85% of the observed variation in base flow from 128 USGS gauges, 69% of the observed variation in discharge accrual from 48 river segments, and 29% of the residual variation in local groundwater flux from 33 locations as measured by hyporheic temperature profiles after factoring out the effects of climate. Although it does not incorporate any information about the actual water table surface, by quantifying spatial variation of key constraints on groundwater-related attributes, the model provides strata for more intensive study, as well as a useful spatial tool for regional and local conservation planning, fisheries management, wetland characterization, and stream assessment.     

Importance of Sediment–Water Interactions in Coeur d’Alene Lake,Idaho, USA: Management Implications

A field study at Coeur dAlene Lake, Idaho, USA, was conducted between October 1998 and August 2001 to examine the potential importance of sediment–water interactions on contaminant transport and to provide the first direct measurements of the benthic flux of dissolved solutes of environmental concern in this lake. Because of potential ecological effects, dissolved zinc and orthophosphate were the solutes of primary interest. Results from deployments of an in situ flux chamber indicated that benthic fluxes of dissolved Zn and orthophosphate were comparable in magnitude to riverine inputs. Tracer analyses and benthic-community metrics provided evidence that solute benthic flux were diffusion-controlled at the flux-chamber deployment sites. That is, effects of biomixing (or bioturbation) and ground-water interactions did not strongly influence benthic flux. Remediation efforts in the river might not produce desired water-quality effects in the lake because imposed shifts in concentration gradients near the sediment–water interface would generate a benthic feedback response. Therefore, development of water-quality models to justify remediation strategies requires consideration of contaminant flux between the water column and underlying sediment in basins that have been affected by long-term (decadal) anthropogenic activities.     

Comparison of Four <Emphasis Type="Italic">Sesbania</Emphasis> Species to Remediate Pb/Zn and Cu Mine Tailings

A 6-month greenhouse pot trial was performed, aimed at screening appropriate Sesbania species for remediation of Pb/Zn and Cu mine tailings. Performances of young seedlings of four Sesbania species (S. cannabina, S. grandiflora, S. rostrata, and S. sesban) were compared with and without inoculation of rhizobia. Seedlings were planted in two types of tailings amended with garden soil or garden soil mixed with river sediment. The results indicated that inoculated plants generally produced a higher biomass than samples without inoculation. Pb/Zn mine tailings containing rather high concentrations of total and water-soluble Cu, Pb, and Zn were toxic to plant growth compared with Cu mine tailings, according to the growth performance of the four species. Sesbania sesban and S. rostrata showed superior growth performance, compared to the other two species. Thus, they can serve as pioneer species to modify the barren environment, by providing organic matter and essential nutrients such as nitrogen, upon decomposition, in a relatively short period of time. This is especially true for S. rostrata, which is an annual plant that forms both stem and root nodules. However, a longer-term field trial should be conducted to investigate if superior species can beneficially modify the habitat for the growth of subsequent plant communities.