Tagging Diesel and Residential Oil Furnace Emissions in Roanoke,Virginia, with Enriched Isotopes of Samarium

Stable isotopic tracers were used in Roanoke, Virginia, to tag particulate emissions from diesel trucks and residential oil furnaces, two sources of soot and PAHs which cannot be differentiated on the basis of known constituents. Approximately 1.6 g of enriched ¹⁴⁹Sm were used to tag 264 m³ of diesel fuel burned by the city bus and truck fleets; 0.39 g of ¹⁵⁰Sm were used to tag 106 m³ of residential heating oil. Picogram amounts of the tracers were determined simultaneously by thermal-ionization mass spectrometry in fine particles collected within the city at signal-to-noise ratios as large as 6000. These results demonstrate the feasibility of tracing particles from multiple combustion sources with stable, separated isotopes.     

Pyrolysis of waste tyres: A review

Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. The key influence on the product yield, and gas and oil composition, is the type of reactor used which in turn determines the temperature and heating rate. Tyre pyrolysis oil is chemically very complex containing aliphatic, aromatic, hetero-atom and polar fractions. The fuel characteristics of the tyre oil shows that it is similar to a gas oil or light fuel oil and has been successfully combusted in test furnaces and engines. The main gases produced from the pyrolysis of waste tyres are H₂, C₁–C₄ hydrocarbons, CO₂, CO and H₂S. Upgrading tyre pyrolysis products to high value products has concentrated on char upgrading to higher quality carbon black and to activated carbon. The use of catalysts to upgrade the oil to a aromatic-rich chemical feedstock or the production of hydrogen from waste tyres has also been reported. Examples of commercial and semi-commercial scale tyre pyrolysis systems show that small scale batch reactors and continuous rotary kiln reactors have been developed to commercial scale.     

Evolving social influence in large populations

Darwinian studies of collective human behaviour, which deal fluently with change and are grounded in the details of social influence among individuals, have much to offer “social” models from the physical sciences which have elegant statistical regularities. Although Darwinian evolution is often associated with selection and adaptation, “neutral” models of drift are equally relevant. Building on established neutral models, we present a general, yet highly parsimonious, stochastic model, which generates an entire family of real-world, right-skew socio-economic distributions, including exponential, winner-take-all, power law tails of varying exponents, and power laws across the whole data. The widely used Barabási and Albert (1999) Science 286: 509-512 “B-A” model of preferential attachment is a special case of this general model. In addition, the model produces the continuous turnover observed empirically within these distributions. Previous preferential attachment models have generated specific distributions with turnover using arbitrary add-on rules, but turnover is an inherent feature of our model. The model also replicates an intriguing new relationship, observed across a range of empirical studies, between the power law exponent and the proportion of data represented in the distribution.     

Lethal and sublethal effects of the pyrethroid,bifenthrin, on grass shrimp (Palaemonetes pugio) and sheepshead minnow (Cyprinodon variegatus)

This study investigated the lethal and sublethal effects of the pyrethroid insecticide bifenthrin on adult and larval grass shrimp, Palaemonetes pugio, and adult sheepshead minnows, Cyprinodon variegatus. The effects were determined by conducting 96-h aqueous static renewal tests and 24-h static tests with sediment. Oxidative stress biomarkers, lipid peroxidation, glutathione, and catalase were also assessed. The 96-h aqueous LC₅₀ value for adult shrimp was 0.020 μ g/L (95% CI: 0.015–0.025 μ g/L) and for larval shrimp was 0.013 μ g/L (95% CI: 0.011–0.016 μ g/L). The 96-h aqueous LC₅₀ for adult sheepshead minnow was 19.806 μ g/L (95% CI: 11.886–47.250 μ g/L). The 24-h sediment LC₅₀ for adult shrimp was 0.339 μ g/L (95% CI: 0.291–0.381 μ g/L) and for larval shrimp was 0.210 μ g/L (95% CI: 0.096–0.393 μ g/L). The oxidative stress assays showed some increasing trends toward physiological stress with increased bifenthrin concentrations but they were largely inconclusive. Given the sensitivity of grass shrimp to this compound in laboratory bioassays, additional work will be needed to determine if these exposure levels are environmentally relevant.     

Using social resilience and resource dependency to increase the effectiveness of marine conservation initiatives in Salum,Egypt

The social and economic ramifications of marine conservation strategies such as marine protected areas (MPAs) are important to consider prior to their implementation to ensure that they do not exceed the resilience of resource-users and that resource protection might be maximised through compliance and low resistance. This paper presents a framework in which the human dimensions can be more easily and usefully integrated into the design and delivery of conservation initiatives. The framework espouses quantifying (1) the level of dependency on the resource; (2) perceptions towards conservation initiatives; and (3) social resilience. The framework is applied in Salum, Egypt, which is the site of a prospective MPA.     

Macrofaunal recolonisation following the intertidal placement of fine-grained dredged material

Dredged material is increasingly being regarded as a potential resource, and one of its many uses is to create and/or improve intertidal habitats (i.e. beneficial use). However, uncertainties over the longer-term environmental consequences of such schemes have, to date, limited the practice to small-scale applications in UK waters. This paper studies the macrofaunal recolonisation of fine-grained dredged material recharged concurrently at four adjacent recharge areas along the south-east coast of the UK in order to facilitate predictions regarding the recolonisation of comparable schemes and, thereby, to promote effective environmental management. During the 2-year study period, the four recharge areas were distinctly different in terms of their environmental characteristics, primarily wave exposure and bed level. These conditions resulted in different macrofaunal recolonisation rates and community structures. While the low-level, wave-sheltered area experienced rapid recolonisation, the process was delayed until 12 months post-recharge at the relatively wave-exposed areas. Bed level differences resulted in distinctly different communities in wave-sheltered areas but not under wave-exposed conditions. While we are unable to separate the effects of individual environmental variables on recolonisation, these results provide general conclusions as to the importance of environmental conditions on resulting macrofaunal communities.     

Value addition of vegetable wastes by solid-state fermentation using Aspergillus niger for use in aquafeed industry

Vegetable waste typically has high moisture content and high levels of protein, vitamins and minerals. Its value as an agricultural feed can be enhanced through solid-state fermentation (SSF). Two experiments were conducted to evaluate the nutritional status of the products derived by SSF of a mixture of dried vegetable waste powder and oil cake mixture (soybean flour, wheat flour, groundnut oil cake and sesame oil cake at 4:3:2:1 ratio) using fungi Aspergillus niger S₁4, a mangrove isolate, and A. niger NCIM 616. Fermentation was carried out for 9 days at 35% moisture level and neutral pH. Significant (p < 0.05) increase in crude protein and amino acids were obtained in both the trials. The crude fat and crude fibre content showed significant reduction at the end of fermentation. Nitrogen free extract (NFE) showed a gradual decrease during the fermentation process. The results of the study suggest that the fermented product obtained on days 6 and 9 in case of A. niger S₁4 and A. niger NCIM 616 respectively contained the highest levels of crude protein.