The separation of catalyst after photocatalytic reactions conducted in the presence of TiO2/FeCl3/UV

One of the problems connected with wastewater treatment by the photocatalytic method in the presence of TiO2 suspension is necessity of the later catalyst separation. The method proposed by us for this purpose, consists in the usage of coagulation of TiO2 suspension with the aid of FeCl3, particularly in the cases when addition of the salt is used in order to intensification of the photocatalytic process. The effects of the TiO2 separation were studied from the mixtures, after photocatalytic Acid Orange 7 degradation, with dosage of FeCl3 at different stages of the process. The coagulation was carried out at different pH values as well as different FeCl3 concentrations. It was stated that nearly 100% of separation and simultaneously, nearly 100% of decolouration of the examined Acid Orange 7 solutions after their illumination in the presence of TiO2/FeCl3 and coagulation which was produced only by increasing of pH of the obtained mixtures, were nearly possible.     

The hydrozoan coral<Emphasis Type="Italic"> Millepora dichotoma</Emphasis>: speciation or phenotypic plasticity?

This article describes ecological and biological differences between two morphs of the Red Sea fire coral Millepora dichotoma. The species is divided into two main morphs: branching and encrusting, which were found to differ both in color and morphology. Each morph has two or more sub-morphs. A total of 372 M. dichotoma colonies were examined in a census at two study sites in the Gulf of Elat. Colony size and abundance of the two morphs were found to differ significantly between sites. Experimental examination of each morph's morphological plasticity revealed different growth rates and difference in growth plasticity between the branching and the encrusting morph. Most of the fragments from the branching colonies (94%) attached to experimentally placed Plexiglas substrate, compared with much less attachment by the encrusting fragments (11%). The growth form of the branching morph on the Plexiglas switched to encrusting, spreading over and covering the substrate. When the new encrusting colony reached the edge of this substrate, it started to produce tips, and returned to growth in the classic branching form. The encrusting morph did not change its growth form. Following attachment of the original fragments of the branching morph to the substrate, 8.1% of them produced new tips. When the original branches were removed, after converting to encrusting growth form, 19% of the fragments produced new tips. The capsule size of nematocysts of the two morphs was also significantly different (t-test, P<0.05). Molecular data (ITS region) clearly demonstrate that these two M. dichotoma morphs differ considerably. Molecular evidence (srRNA) from the symbiotic zooxanthellae also shows a different pattern of clades in the hosts. The ecological, biological and molecular data thus attest to the two morphs being distinguishable. Contrary to previous reports, we consequently suggest that the two morphs of M. dichotoma found in the Gulf of Elat are actually two distinct species.Communicated by O. Kinne, Oldendorf/Luhe     

The effect of mating frequency on female lifetime fecundity in the bulb mite, <Emphasis Type="Italic">Rhizoglyphus robini </Emphasis>(Acari: Acaridae)

We investigated the influence of mating frequency on lifetime reproductive success in females of the bulb mite, Rhizoglyphus robini. This species is highly promiscuous, and its colonial lifestyle promotes mating frequencies of at least several times a day. We manipulated mating frequencies either by keeping females continuously in the presence of a male, with males replaced every second day, or by exposing females to a new male for 4 h every second day (4 h is enough for a male to complete at least one copulation). We used males that were isolated from females either for 2 days, and thus had large reserves of sperm and seminal fluid, or for 2 h. We found that females with continuous access to a male had lower lifetime egg output than those exposed to males intermittently. This effect was mediated through decreased fecundity and not longevity. Male mating history had no significant effect on female fecundity or longevity. These results confirm that mating frequencies observed in bulb mite colonies exceed those necessary for sperm replenishment, and suggests that frequent mating is costly to females. We discuss possible explanations for the maintenance of mating frequencies that are detrimental to females.     

Prevalence of Human Parainfluenza Viruses and Noroviruses Genomes on Office Fomites

The aim of this study was to evaluate the potential role of office fomites in respiratory (human parainfluenza virus 1—HPIV1, human parainfluenza virus 3—HPIV3) and enteric (norovirus GI—NoV GI, norovirus GII—NoV GII) viruses transmission by assessing the occurrence of these viruses on surfaces in office buildings. Between 2016 and 2017, a total of 130 surfaces from open-space and non-open-space rooms in office buildings located in one city were evaluated for HPIV1, HPIV3, NoV GI, and NoV GII viral RNA presence. Detection of viruses was performed by RT-qPCR method. Study revealed 27 positive samples, among them 59.3% were HPIV3-positive, 25.9% HPIV1-positive, and 14.8% NoV GII-positive. All tested surfaces were NoV GI-negative. Statistical analysis of obtained data showed that the surfaces of office equipment including computer keyboards and mice, telephones, and desktops were significantly more contaminated with respiratory viruses than the surfaces of building equipment elements such as door handles, light switches, or ventilation tracts (χ ² p = 0.006; Fisher’s Exact p = 0.004). All examined surfaces were significantly more contaminated with HPIVs than NoVs (χ ² p = 0.002; Fisher’s Exact p = 0.003). Office fomites in open-space rooms were more often contaminated with HPIVs than with NoVs (χ ² p = 0.016; Fisher’s Exact p = 0.013). The highest average concentration of HPIVs RNA copies was observed on telephones (1.66 × 10² copies/100 cm²), while NoVs on the light switches (1.40 × 10² copies/100 cm²). However, the Kruskal–Wallis test did not show statistically significant differences in concentration levels of viral RNA copies on surfaces between the all tested samples. This study unequivocally showed that individuals in office environment may have contact with both respiratory and enteric viral particles present on frequently touched surfaces.     

Determining eyeball surface area directly exposed to the effects of external factors

This article discusses determining the surface area of eyeballs of men and women exposed to the direct effects of external factors in the working environment. For one eye, the mean surface is 172–182?mm². The determined surface area can be used in formulas for calculating the exposure of eyeballs to harmful chemical substances in workplace air.     

Analysis of noise pollution in an andesite quarry with the use of simulation studies and evaluation indices

This paper presents the verification of two partial indices proposed for the evaluation of continuous and impulse noise pollution in quarries. These indices, together with the sound power of machines index and the noise hazard index at the workstation, are components of the global index of assessment of noise hazard in the working environment of a quarry. This paper shows the results of acoustic tests carried out in an andesite quarry. Noise generated by machines and from performed blasting works was investigated. On the basis of acoustic measurements carried out in real conditions, the sound power levels of machines and the phenomenon of explosion were determined and, based on the results, three-dimensional models of acoustic noise propagation in the quarry were developed. To assess the degree of noise pollution in the area of the quarry, the continuous and impulse noise indices were used.     

Traces of DU in samples of environmental bio-monitors (non-flowering plants, fungi) and soil from target sites of the Western Balkan region

This paper reports results of gamma and alpha spectrometric measurements for mosses, lichens, fungi and soil samples from areas in the Balkans targeted by depleted uranium (DU). Samples were collected in 2002 and 2003 in the vicinity of several villages, principally Han Pijesak (Bosnia and Herzegovina, hit by DU in 1995) and Bratoselce (South Serbia, hit by DU in 1999) and in lesser numbers from Gornja Stubla, Kosovo (which is identified as a high natural radon/thoron area) and Presevo close to the Kosovo border. In the course of gamma spectrometric measurements some results suggested samples with unusual high uranium contents which might be considered to be a signature for the presence of DU, although many samples had very high detection limits. Alpha spectrometric measurements directly proved the presence of DU for five samples, all from directly targeted places. These were samples of mosses, lichens and soil. For some samples homogeneity tests were applied which showed a rather even distribution of DU in these samples. No trace of DU was found in any sample from a dwelling.     

Consumer health risk to pesticide residues in Salvia officinalis L. and its infusions

Salvia officinalis L. is a popular herb widely used in culinary, cosmetic, and medicinal preparations, and also as an ornamental plant. Sage crops are threatened by many diseases, such as gray mold, powdery mildew, and leaf spot, by weeds, and by pests, such as aphids. Use of crop protection products may lead to presence of pesticide residues in this herb. The aim of this work was to study presence of pesticide residues in the herb, S. officinalis L., available on the retail market in Poland, to verify their compliance with the maximum residue levels (MRLs) and to assess the chronic and acute risks associated with consumption of this herb and infusions prepared from contaminated sage plants. Ninety active substances of pesticides were analyzed, including all active substances registered in Poland for protection of the sage. Five active substances were found, one fungicide – boscalid and four insecticides: chlorpyrifos, pp′-DDT, dimethoate (residue levels above MRL) and indoxacarb. The chronic and acute exposure to pesticide residues consumed with sage did not exceed 0.02% of the acceptable daily intake (ADI) and 0.1% of the acute reference dose (ARfD), respectively.     

Active methods of mercury removal from flue gases

Due to its adverse impact on health, as well as its global distribution, long atmospheric lifetime and propensity for deposition in the aquatic environment and in living tissue, the US Environmental Protection Agency (US EPA) has classified mercury and its compounds as a severe air quality threat. Such widespread presence of mercury in the environment originates from both natural and anthropogenic sources. Global anthropogenic emission of mercury is evaluated at 2000 Mg year⁻¹. According to the National Centre for Emissions Management (Pol. KOBiZE) report for 2014, Polish annual mercury emissions amount to approximately 10 Mg. Over 90% of mercury emissions in Poland originate from combustion of coal.

The purpose of this paper was to understand mercury behaviour during sub-bituminous coal and lignite combustion for flue gas purification in terms of reduction of emissions by active methods. The average mercury content in Polish sub-bituminous coal and lignite was 103.7 and 443.5 μg kg⁻¹. The concentration of mercury in flue gases emitted into the atmosphere was 5.3 μg m⁻³ for sub-bituminous coal and 17.5 μg m⁻³ for lignite. The study analysed six low-cost sorbents with the average achieved efficiency of mercury removal from 30.6 to 92.9% for sub-bituminous coal and 22.8 to 80.3% for lignite combustion. Also, the effect of coke dust grain size was examined for mercury sorptive properties. The fine fraction of coke dust (CD) adsorbed within 243–277 μg Hg kg⁻¹, while the largest fraction at only 95 μg Hg kg⁻¹. The CD fraction < 0.063 mm removed almost 92% of mercury during coal combustion, so the concentration of mercury in flue gas decreased from 5.3 to 0.4 μg Hg m⁻³. The same fraction of CD had removed 93% of mercury from lignite flue gas by reducing the concentration of mercury in the flow from 17.6 to 1.2 μg Hg m⁻³. The publication also presents the impact of photochemical oxidation of mercury on the effectiveness of Hg vapour removal during combustion of lignite. After physical oxidation of Hg in the flue gas, its effectiveness has increased twofold.

     

Landfill leachates and wastewater of maritime origin as possible sources of endocrine disruptors in municipal wastewater

Environmental Science and Pollution Research - In this study, wastewater from municipal services, such as a port wastewater reception facility (PRF-WW) and a municipal solid waste plant (MSWP), was...