Mapping Three‐Dimensional Water‐Quality Data in the Chesapeake Bay Using Geostatistics1

Abstract:  Data interpretation and visualization software tools with geostatistical capabilities were adapted, customized, and tested to assist the Chesapeake Bay Program in improving its water‐quality modeling protocols. Tools were required to interpolate, map, and visualize three‐dimensional (3D) water‐quality data, with the capability to determine estimation errors. Components of the software, originally developed for ground‐water modeling, were customized for application in estuaries. Additional software components were developed for retrieval, and for pre‐ and post‐ processing of data. The Chesapeake Bay Program uses the 3D mapped data for input to the Bay water‐quality model that projects the future health of the Bay and its tidal tributary system. In determining water‐quality attainment criteria, 3D kriging estimation errors are needed as a statistical measure of uncertainty. Furthermore, given the high cost of installing and operating new monitoring stations, geostatistical techniques can assist the Chesapeake Bay Program in the identification of suitable data collection locations. Following the evaluation, selection, and development of the software components phase, 3D ordinary kriging techniques with directional semi‐variograms to account for anisotropy were successfully demonstrated for mapping 3D fixed station water‐quality data, such as dissolved oxygen and salinity. Additionally, an improved delineation tool was implemented to simulate the upper and lower pycnocline boundary surfaces allowing the segregation of the interpolated 3D data into three separate zones for a better characterization of the pycnocline layer.     

A Biological Assessment of Streams in the Eastern United States Using a Predictive Model for Macroinvertebrate Assemblages1

Abstract: A predictive model (RIVPACS‐type) for benthic macroinvertebrates was constructed to assess the biological condition of 1,087 streams sampled throughout the eastern United States from 1993‐2003 as part of the U.S. Geological Survey’s National Water‐Quality Assessment Program. A subset of 338 sites was designated as reference quality, 28 of which were withheld from model calibration and used to independently evaluate model precision and accuracy. The ratio of observed (O) to expected (E) taxa richness was used as a continuous measure of biological condition, and sites with O/E values <0.8 were classified as biologically degraded. Spatiotemporal variability of O/E values was evaluated with repeated annual and within‐site samples at reference sites. Values of O/E were regressed on a measure of urbanization in three regions and compared among streams in different land‐use settings. The model accurately predicted the expected taxa at validation sites with high precision (SD = 0.11). Within‐site spatial variability in O/E values was much larger than annual and among‐site variation at reference sites and was likely caused by environmental differences among sampled reaches. Values of O/E were significantly correlated with basin road density in the Boston, Massachusetts (p < 0.001), Birmingham, Alabama (p = 0.002), and Green Bay, Wisconsin (p = 0.034) metropolitan areas, but the strength of the relations varied among regions. Urban streams were more depleted of taxa than streams in other land‐use settings, but larger networks of riparian forest appeared to mediate biological degradation. Taxa that occurred less frequently than predicted by the model were those known to be generally intolerant of a variety of anthropogenic stressors.     

Moderation of dust explosions

Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.

Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.

Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature.     

DYNAMIC PROGRAMMING FOR OPTIMAL CAPACITY EXPANSION OF WASTEWATER TREATMENT PLANTS1

ABSTRACT: A dynamic programming procedure for the planning and operation of a wastewater treatment plant over a long period of time is presented. In order to meet increased demands for wastewater treatment in the future, the expansion of existing plants must be considered. Dynamic programming is employed to determine the optimal schedule of expansion at each plant, simultaneously determining an optimal operating policy (treatment level). The optimal schedule of expansion at each plant depends on the following: (1) the shape of the projected wastewater demand function; (2) the interest rate used; (3) the locations and capacities of the facilities available; and (4) the rates of increase of the costs of construction, labor, chemicals, and electric power. An example illustrating the use of the procedure is presented.     

ACUTE RESIDUAL TOXICITY OF SEVERAL DISINFECTANTS IN DOMESTIC AND INDUSTRIAL WASTE WATER1

ABSTRACT: This study determined the acute toxicity of waste water disinfected with chlorine, bromine chloride, or ozone. The residual toxicity of effluent dechlorinated with sulfur dioxide was also tested. Toxicity tests were conducted with cyprinid, salmonid, and centrarchid fishes, as well as several species of fresh water macroinvertebrates. Residual chlorine exhibited the greatest toxicity of the disinfectants tested; dechlorination with sulfur dioxide effectively eliminated the toxicity of chlorinated effluent. Residual ozone produced mortality in test animals only under special conditions where subjects were exposed to effluent immediately after it was contacted with ozone, and chlorobrominated effluent was more toxic to salmonids than chlorinated effluent.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

GRADUATE TRAINING IN WATER TRACK ENVIRONMENTAL ENGINEERING: RESULTS OF A SURVEY OF EMPLOYERS1

ABSTRACT: The authors conducted a mail survey of 600 employers in the government and private sectors who were thought to hire water track environmental engineers. Of a total of 148 respondents, over 80 percent employed a combined total of over 2,800 environmental engineers. The survey addressed two basic questions: (1) what is the quality of graduate education recently trained engineers have received, and (2) what effect does a nonengineering undergraduate degree have on an engineering graduate student's employment potential. In answer to the first question, respondents indicated that engineering graduates were deficient in report writing, business law (contracts and specifications), economics and finance, and practical design. Many employers stated that students could better prepare themselves for employment by (1) obtaining professional experience through internships and summer or part-time jobs, and (2) learning to communicate effectively, both orally and in writing. In answer to the second question, 50 percent of the respondents indicated that engineers without an engineering undergraduate degree would not necessarily be limited in their abilities to perform engineering duties.     

The African environment: from transition to stability

Summary The African environment is in a state of transition: this allows a unique opportunity of motivating and training the citizens and leaders of tomorrow to achieve environmental stability on that continent. A framework for thought on the matter is presented here.Has previously taught in the UK and NigeriaScientific Advisor to Commonwealth Human Ecology Council. To whom all correspondence should be addressed.     

CASE STUDIES OF AGRICULTURAL WATER CONSERVATION1

Farmers from four irrigation districts in Texas and California were questioned about water conservation practices they are now using, those they plan to adopt, and potential incentives that government might offer to induce still further water conservation on their part. While responses differed somewhat from place to place and among individual farmers, the general results were: a) farmers reported that “water conservation” is not new to them, it is something they practice regularly; b) recent innovations such as laser controlled land leveling devices have permitted some substantial water use reductions in recent years; and c) even greater incentive mechanisms that government could provide and that farmers would accept as useful incentives, such as long term low interest loans for water saving equipment, would probably not be able to reduce water use in agriculture much further than 15 percent below current levels. It is recommended nonetheless that Federal agencies and local water districts and individuals should nonetheless pursue water conservation training and education programs, demonstrations of conjunctive use and water banking opportunities for water saving, and increased loan programs for installation of water saving equipment.