Ignition of dust-air atmospheres by ultrasonic waves

This paper shows the results of our investigations on the ignition source ultrasound in dust-air atmospheres. Ultrasound is, on the one hand, considered to be an ignition source according to international safety standards (EN 1127–1 (2011)). On the other hand, though, ultrasound is used for various applications in gases and air, such as level and flow measurement, or in the process industry, but no explosion accidents have yet been reported. Our research now shows that it is indeed possible to ignite dust-air mixtures in ultrasound fields under certain conditions. We conducted our experiments in an ultrasound standing wave field and used maize starch, calcium stearate and sulfur dust. For ignitions, an absorbing target was needed to convert the acoustic energy into heat. From theoretical estimations and experiments critical conditions that provoke ultrasonically triggered explosions are identified.     

Projected declines in global DHA availability for human consumption as a result of global warming

Ambio - Docosahexaenoic acid (DHA) is an essential, omega-3, long-chain polyunsaturated fatty acid that is a key component of cell membranes and plays a vital role in vertebrate brain function. The...     

Influence of plant-earthworm interactions on SOM chemistry and p,p'-DDE bioaccumulation

Laboratory experiments assessed how bioaccumulation of weathered p,p′-DDE from soil and humic acid (HA) chemistry are affected by interactions between the plants Cucurbita pepo ssp. pepo and ssp. ovifera and the earthworms Eisenia fetida, Lumbricus terrestris, and Apporectodea caliginosa. Total organochlorine phytoextraction by ssp. pepo increased at least 25% in the presence of any of the earthworm species (relative to plants grown in isolation). Uptake of the compound by ssp. ovifera was unaffected by earthworms. Plants influenced earthworm bioaccumulation as well. When combined with pepo, p,p′-DDE levels in E. fetida decreased by 50%, whereas, in the presence of ovifera, bioconcentration by L. terrestris increased by more than 2-fold. Spectral analysis indicated a decrease in hydrophobicity of HA in each of the soils in which both pepo and earthworms were present. However, HA chemistry from ovifera treatments was largely unaffected by earthworms. Risk assessments of contaminated soils should account for species interactions, and SOM chemistry may be a useful indictor of pollutant bioaccumulation.     

Removal and formation of chlorinated triclosan derivatives in wastewater treatment plants using chlorine and UV disinfection

Triclosan, a common antimicrobial agent, may react during the disinfection of wastewater with free chlorine to form three chlorinated triclosan derivatives (CTDs). This is of concern because the CTDs may be photochemically transformed to tri- and tetra-chlorinated dibenzo-p-dioxins when discharged into natural waters. In this study, wastewater influent, secondary (pre-disinfection) effluent, and final (post-disinfection) effluent samples were collected on two occasions each from two activated sludge wastewater treatment plants, one using chlorine disinfection and one using UV disinfection. Concentrations of triclosan and three CTDs were determined using ultra performance liquid chromatography-triple quadrupole mass spectrometry with isotope dilution methodology. Triclosan and the CTDs were detected in every influent sample at levels ranging from 453 to 4530 and 2 to 98 ng L⁻¹, respectively, though both were efficiently removed from the liquid phase during activated sludge treatment. Triclosan concentrations in the pre-disinfection effluent ranged from 36 to 212 ng L⁻¹, while CTD concentrations were below the limit of quantification (1 ng L⁻¹) for most samples. In the treatment plant that used chlorine disinfection, triclosan concentrations decreased while CTDs were formed during chlorination, as evidenced by CTD levels as high as 22 ng L⁻¹ in the final effluent. No CTDs were detected in the final effluent of the treatment plant that used UV disinfection. The total CTD concentration in the final effluent of the chlorinating treatment plant reached nearly one third of the triclosan concentration, demonstrating that the chlorine disinfection step played a substantial role in the fate of triclosan in this system.     

Activated soil filters for removal of biocides from contaminated run-off and waste-waters

Building facades can be equipped with biocides to prevent formation of algal, fungal and bacterial films. Thus run-off waters may contain these highly active compounds. In this study, the removal of several groups of biocides from contaminated waters by means of an activated soil filter was studied.A technical scale activated vertical soil filter (biofilter) with different layers (peat, sand and gravel), was planted with reed (Phragmites australis) and used to study the removal rates and fate of hydrophilic to moderate hydrophobic (log K_ow 1.8-4.4) biocides and biocide metabolites such as: Terbutryn, Cybutryn (Irgarol® 1051), Descyclopropyl-Cybutryn (Cybutryn and Terbutryn metabolite), Isoproturon, Diuron, and its metabolite Diuron-desmonomethyl, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone and Iodocarbamate (Iodocarb). Three experiments were performed: the first one (36 d) under low flow conditions (61 L m⁻² d⁻¹) reached removal rates between 82% and 100%. The second one was performed to study high flow conditions: During this experiment, water was added as a pulse to the filter system with a hydraulic load of 255 L m⁻² within 5 min (retention time <1 h). During this experiment the removal rates of the compounds decreased drastically. For five compounds (Cybutryn, Descyclopropyl-Cybutryn, Diuron, Isoproturon, and Iodocarb) the removal dropped temporarily below 60%, while it was always above 70% for the others (Terbutryn, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone). However, this removal is a considerable improvement compared to direct discharge into surface waters or infiltration into soil without appropriate removal. In the last experiment the removal efficiencies of the different layers were studied. Though the peat layer was responsible for most of the removal, the sand and gravel layers also contributed significantly for some compounds. All compounds are rather removed by degradation than by sorption.     

Measuring in-cabin school bus tailpipe and crankcase PM2.5: a new dual tracer method

Exposures of occupants in school buses to on-road vehicle emissions, including emissions from the bus itself, can be substantially greater than those in outdoor settings. A dual tracer method was developed and applied to two school buses in Seattle in 2005 to quantify in-cabin fine particulate matter (PM2.5) concentrations attributable to the buses' diesel engine tailpipe (DPMtp) and crankcase vent (PMck) emissions. The new method avoids the problem of differentiating bus emissions from chemically identical emissions of other vehicles by using a fuel-based organometallic iridium tracer for engine exhaust and by adding deuterated hexatriacontane to engine oil. Source testing results showed consistent PM:tracer ratios for the primary tracer for each type of emissions. Comparisons of the PM:tracer ratios indicated that there was a small amount of unburned lubricating oil emitted from the tailpipe; however, virtually no diesel fuel combustion products were found in the crankcase emissions. For the limited testing conducted here, although PMck emission rates (averages of 0.028 and 0.099 g/km for the two buses) were lower than those from the tailpipe (0.18 and 0.14 g/km), in-cabin PMck concentrations averaging 6.8 microg/m3 were higher than DPMtp (0.91 microg/m3 average). In-cabin DPMtp and PMck concentrations were significantly higher with bus windows closed (1.4 and 12 microg/m3, respectively) as compared with open (0.44 and 1.3 microg/m3, respectively). For comparison, average closed- and open-window in-cabin total PM2.5 concentrations were 26 and 12 microg/m3, respectively. Despite the relatively short in-cabin sampling times, very high sensitivities were achieved, with detection limits of 0.002 microg/m3 for DPMtp and 0.05 microg/m3 for PMck.