Effect of Cross-Linking Waste Protein with Diepoxides on its Biodegradation under Anaerobic Conditions

Biodegradability testing was performed in an aqueous environment under anaerobic conditions after inoculation with digested sludge from municipal wastewater treatment plant. In cross-linking with 1,2:3,4-diepoxybutane in limits 0.8–9.1% weight, biodegradability degree decreased from 76.8 to 62.2%; when 1,2:7,8 diepoxyoctane in quantities 1.1–13.2% weight was used, biodegradability degree dropped more prominently – from 72.3 to 22.8%. There is obviously a direct connection between growing cross-link degree (assessed by so-called fixation index) and decreasing readiness to biodegradation, apparently owing to build-up of a network forming an obstacle to access of micro-organisms and enzymes.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

Best Management Practices for Silvicultural Chemicals and the Science Behind Them

Silvicultural chemicals include fertilizers and pesticides applied for forest management. All states east of the Rockies have at least some form of silvicultural chemical best management practices (SCBMPs) and it is widely accepted that SCBMPs effect some protection of water quality. All SCBMPs recommend handling and application precautions and a minimum width streamside management zone (SMZ) on each side of streams for protection of water quality and aquatic ecosystems. Typically these zones increase in width as stream width increases. In areas where cold-water fish are present, additional widths are designated for their protection. Minimum SMZ widths range from 8 to 91 meters on each side of the stream bank for intermittent and perennial streams. Most SMZ recommendations do not cover ephemeral drainages, ditches or canals. SMZs are generally described as being site specific with width dependent on slope, soil type and other conditions as well as the stream's designation as perennial or intermittent. The science behind SCBMPs is often elusive. Spray drift can be controlled through proper selection and use of application technology while considering site specific conditions. SMZs greatly reduce the amount of herbicides reaching streams. Available toxicological data and research on aquatic ecosystem impacts from herbicide use suggest that additional protection from silvicultural chemicals may not be necessary. However, there is evidence to suggest that protection of ephemeral and intermittent channels can further reduce entry of silvicultural chemicals into streams and also reduce sedimentation. This may be the most fruitful area of research we can pursue in light of the knowledge gaps listed.     

Best management practices compliance monitoring approaches for forestry in the eastern United States

Many of the eastern states that have published best management practices (BMPs) or forest management guidelines have also developed compliance monitoring programs to assess the application of these BMPs or guidelines on public and private forest land. The approaches among these states to collecting on-site monitoring data (measuring compliance) and evaluating sites are variable. A survey of eastern states found that almost all southern states monitor application of BMPs, but proportionally fewer of the northern states have established compliance monitoring programs. The state forestry agencies provide the leadership for these programs in most of the eastern states. States that monitor tend to evaluate all public and private forest landowner categories located within their states. In general, northern states monitor a broader array of site resources (e.g., cultural resources, visual quality) as compared to southern states which focus on water quality and wetlands protection. However, northern states focus their monitoring on timber harvesting, forest road construction and maintenance as compared to southern states which tend to monitor a broader array of forest management activities (e.g., site preparation, reforestation). When selecting sites for monitoring, the most common approach is to select some sites from all landowner categories within the state. Many states do not specify any criteria to identify sites for monitoring so that all sites have an equal chance for selection. Some states do use specific criteria to filter sites for monitoring, most commonly size of forest management activity and proximity to water.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

Radiogenic Lead Isotopes and Time Stratigraphy in the Hudson River, New York

Radionuclide, radiogenic lead isotope and trace metal analyses on fine-grained sediment cores collected along 160 km of the upper and tidal Hudson River were used to examine temporal trends of contaminant loadings and to develop radiogenic lead isotopes both as a stratigraphic tool and as tracers for resolving decadal particle transport fluxes. Very large inputs of Cd, Sb, Pb, and Cr are evident in the sediment record, potentially from a single manufacturing facility. The total range in radiogenic lead isotope ratios observed in well-dated cores collected about 24 km downstream of the plant is large (e.g., maximum difference in ²⁰⁶Pb/²⁰⁷Pb is 10%), characterized by four major shifts occurring in the 1950s, 1960s, 1970s and 1980s. The upper Hudson signals in Cd and radiogenic lead isotopes were still evident in sediments collected 160 km downstream in the tidal Hudson. The large magnitude and abrupt shifts in radiogenic lead isotope ratios as a function of depth provide sensitive temporal constraints that complement information derived from radionuclide analyses to significantly improve the precision of dating assignments. Application of a simple dilution model to data from paired cores suggests much larger sediment inputs in one section of the river than previously reported, suggesting particle influxes to the Hudson have been underestimated.     

Review of in situ remediation technologies for lead,zinc, and cadmium in soil

This article presents a review of in situ technologies for the remediation of soils contaminated with lead, zinc, and/or cadmium. The objective of this review is to assess the developmental status of the available in situ technologies and provide a general summary of typical applications and limitations of these technologies. The literature review identified seven in situ remediation technologies—solidification/stabilization, vitrification, electrokinetic remediation, soil flushing, phytoextraction, phytostabilization, and chemical stabilization. These technologies were considered for their ability to meet a specific set of remediation objectives under a range of conditions. Each of these technologies has both strengths and weaknesses for addressing particular remedial situations discussed in the article for each of the technologies. A general summary of which technologies are most applicable to common remedial scenarios is also provided. © 2004 Wiley Periodicals, Inc.     

Towards a model of safety climate measurement.

In this study, a survey instrument was developed to measure safety climate. A review of the scientific literature as well as consultation with an expert panel was used to determine the survey's dimensions. Next, the survey was administered, first as a pilot study (n = 15) and then as a full scale study (n = 229), to employees of the City of Cincinnati Department of Public Works. The psychometric integrity of the survey was assessed according to validity, reliability and utility criteria. Results are presented and discussed.     

A framework for multi-level stakeholder studies in response to global change

Global change, as a process of large-scale environmental effects, and globalisation, as a change in peoples' livelihoods and consumption patterns, will impact communities increasingly in the years to come. Given these pressures, stakeholder consultations and broader stakeholder-centred activities that look at how people are affected by and able to adapt to change become crucial. Stakeholder consultations have been advanced, for instance, in Integrated Assessment activities which include several disciplines and stakeholder participation. Yet, thus far, such consultations have typically taken the form of direct group discussions, in which the differences in the way scientists and other stakeholders communicate are often underestimated. This paper suggests that there is a need to go beyond stakeholder dialogue to focus on the complex institutional factors that shape stakeholders' understandings and actions on multiple levels. Stakeholder studies would thus include not only direct consultation but also a social analysis of the vulnerabilities and adaptive capacities of regional and local institutions and livelihoods.