Environmental fate and impacts of sulfometuron on watersheds in the southern United States

Dissipation of sulfometuron (SM), methyl 2-[[[[(4,6-dimethyl-2-pyrimidinyl)amino]carbonyl]amino]sulfonyl] benzoate, in streamflow, sediment, plant tissue, litter, and soil following operational forestry applications at the target rate of 0.42 kg a.i. ha(-1) was monitored. Streamflow samples were collected at a weir on the perimeter and 30, 60, and 150 m downstream from the perimeter of the application site. Sulfometuron was detected in streamflow at low levels up to 29 days after treatment (DAT) on the watershed treated with the 75% dispersible granule formulation (Oust; DuPont Chemical Company, Wilmington, DE) and less than 53 DAT on the watershed treated with the experimental formulation (1% pellet). Twenty-four-hour average SM concentration in water ranged from not detected to a maximum of 49.3 microg L(-1). Sulfometuron was not detected at quantifiable levels (1 microg L(-1)) 150 m downstream. Stream sediment, vegetation, litter, and soil were sampled periodically up to 180 DAT. All samples were analyzed for SM by high performance liquid chromatography. Sulfometuron dissipated from these watersheds with half-lives that ranged from 4 d in plant tissues to 33 d in soil. Acidic soil solution on these treated watersheds contributed to their rapid dissipation. Environmental impacts are discussed for these watersheds in the context of available toxicological data.     

A GIS Model of Subsurface Water Potential for Aquatic Resource Inventory,Assessment, and Environmental Management

Biological, chemical, and physical attributes of aquatic ecosystems are often strongly influenced by groundwater sources. Nonetheless, widespread access to predictions of subsurface contributions to rivers, lakes, and wetlands at a scale useful to environmental managers is generally lacking. In this paper, we describe a neighborhood analysis approach for estimating topographic constraints on spatial patterns of recharge and discharge and discuss how this index has proven useful in research, management, and conservation contexts. The Michigan Rivers Inventory subsurface flux model (MRI-DARCY) used digital elevation and hydraulic conductivity inferred from mapped surficial geology to estimate spatial patterns of hydraulic potential. Model predictions were calculated in units of specific discharge (meters per day) for a 30-m²-cell raster map and interpreted as an index of potential subsurface water flux (shallow groundwater and event through-flow). The model was evaluated by comparison with measurements of groundwater-related attributes at watershed, stream segment, and local spatial scales throughout Lower Michigan (USA). Map-based predictions using MRI-DARCY accounted for 85% of the observed variation in base flow from 128 USGS gauges, 69% of the observed variation in discharge accrual from 48 river segments, and 29% of the residual variation in local groundwater flux from 33 locations as measured by hyporheic temperature profiles after factoring out the effects of climate. Although it does not incorporate any information about the actual water table surface, by quantifying spatial variation of key constraints on groundwater-related attributes, the model provides strata for more intensive study, as well as a useful spatial tool for regional and local conservation planning, fisheries management, wetland characterization, and stream assessment.     

Assessing Biological Integrity Using Freshwater Fish and Decapod Habitat Selection Functions

Comparison between the number of taxa observed and the number expected in the absence of human impact is an easily understood and ecologically meaningful measure of biological integrity. This approach has been successfully applied to the assessment of the biological quality of flowing water sites using macroinvertebrates with the river invertebrate and classification system (RIVPACS) and its derivatives. In this paper, we develop a method similar to the RIVPACS predictive model approach to assess biological integrity at flowing-water sites using freshwater fish and decapod assemblages. We extend the RIVPACS approach by avoiding the biotic classification step and model each of the individual species separately. These assemblages were sampled at 118 least impacted (reference) sites in the Auckland region, New Zealand. Individual discriminant models based on the presence or absence of the 12 most common fish and decapod species were developed. Using the models, predictions were made using environmental measures at new sites to yield the probability of the capture of each of the 12 species, and these were combined to predict the assemblage expected at sites. The expected assemblage was compared to that observed using an observed over expected ratio (O/E). The models were evaluated using a number of internal tests including jackknifing, data partitioning, and the degree to which O/E values differed between reference sites and a set of sites perceived to be impaired by human impacts.     

Pollutant removal efficacy of three wet detention ponds

Monthly inflow and outflow data were collected from three wet detention ponds in Wilmington, North Carolina, for a 29-mo period. Two ponds drained urban areas consisting primarily of residential, mixed services, and retail usage, while the third mainly drained residential and golf course areas. One of the urban ponds achieved significant reductions in total nitrogen, nitrate, ammonium, total phosphorus, orthophosphate, and fecal coliform bacterial counts. This pond was characterized by a high length to width ratio, with most inputs directed into the upper area, and extensive coverage by a diverse community of aquatic macrophyte vegetation. The second urban pond achieved significant reductions in turbidity and fecal coliform bacterial counts, but there were no significant differences between inflowing and outflowing water nutrient concentrations. There were substantial suburban runoff inputs entering the mid- and lower-pond areas that short-circuited pollutant removal contact time. The golf course pond showed significant increases in nitrate, ammonium, total phosphorus, and orthophosphate in the outflow relative to the inflow, probably as a result of course fertilization. However, nutrient concentrations in the outflow water were low compared with discharges from a selection of other area golf courses, possibly a result of the outflow passing through a wooded wetland following pond discharge. To achieve good reduction in a variety of pollutants, wet pond design should include maximizing the contact time of inflowing water with rooted vegetation and organic sediments. This can be achieved through a physical pond design that provides a high length to width ratio, and planting of native macrophyte species.     

Combination effect of light and toxicity in algal tests

The sensitivity of Scenedesmus subspicatus against potassium dichromate is positively correlated to the photon flux density during the algal growth inhibition test. Low photon flux densities led to significantly reduced maximum effects and higher EC50 levels. To improve the testing of colored substances, we distinguished between the toxic effect (chemical part, represented by potassium dichromate) and the shading effect (physical part, simulated by reduced light intensities during the test) of a hypothetical light absorbing substance. The contribution of these single effects to the total inhibition varied greatly. At high concentrations of potassium dichromate (1.6 and 3.2 mg L(-1)) the physical part never exceeded 25% of the total inhibition, not even at strongest light reduction, while at low concentrations (0.2 and 0.4 mg L(-1)) the physical effect became more prominent when halving the amount of available light. Further, the combination effect of the chemical and the physical effect could be calculated well only by using the concept of independent action. Thus, if chemical and physical effects are measured in combination, as is the case in tests with dye-stuffs, the current test protocol for the algal growth inhibition test may lead to incorrect estimations of the toxic potential.     

Point- and nonpoint-source pesticide contamination in the Zwester Ohm catchment, Germany

Reducing pesticide loads in surface waters implies identifying the pathways responsible for the pollution. The current study documents the pesticide contamination of the river Zwester Ohm, a 4917-ha catchment in Germany with 41% of the land used for crop production. Discharges and concentrations of 19 pesticides were measured continuously at three locations for 15 mo. The load detected at the outlet of the catchment amounted to 9048 g a.i. The losses represent 0.22% of the pesticides applied by the farmers. The contamination showed a seasonal pattern following the pesticide application times. The wastewater treatment plant system (WWTPS) in the catchment (two wastewater treatment plants [WWTP], 14 combined sewer overflows (CSO), four CSO tanks) emits during dry weather periods purified sewage and during storm events sewage mixed with stormwater runoff into the river. The contribution by the WWTPS to the pesticide load was defined as point-source pollution (PSP). The load was dominated by PSP with at least 77% of the total pollution. No significant interdependencies between intrinsic properties of the pesticides, hydrometeorological factors, and the loads occurring in the stream could be found. Therefore, it is not possible to predict PSP for other catchments based on the results from this study. Whereas 65% of the total load entered the river via the WWTP, a portion of 12% was attributed to the CSO. The study points out that the influence of CSO on PSP should be taken into account in future catchment studies in areas with comparable agricultural structure.     

New international long-term ecological research on air pollution effects on the Carpathian Mountain forests,Central Europe

An international cooperative project on distribution of ozone in the Carpathian Mountains, Central Europe was conducted from 1997 to 1999. Results of that project indicated that in large parts of the Carpathian Mountains, concentrations of ozone were elevated and potentially phytotoxic to forest vegetation. That study led to the establishment of new long-term studies on ecological changes in forests and other ecosystems caused by air pollution in the Retezat Mountains, Southern Carpathians, Romania and in the Tatra Mountains, Western Carpathians on the Polish-Slovak border. Both of these important mountain ranges have the status of national parks and are Man & the Biosphere Reserves. In the Retezat Mountains, the primary research objective was to evaluate how air pollution may affect forest health and biodiversity. The main research objective in the Tatra Mountains was to evaluate responses of natural and managed Norway spruce forests to air pollution and other stresses. Ambient concentrations of ozone (O(3)), sulfur dioxide (SO(2)), nitrogen oxides (NO(x)) as well as forest health and biodiversity changes were monitored on densely distributed research sites. Initial monitoring of pollutants indicated low levels of O(3), SO(2), and NO(x) in the Retezat Mountains, while elevated levels of O(3) and high deposition of atmospheric sulfur (S) and nitrogen (N) have characterized the Tatra Mountains. In the Retezat Mountains, air pollution seems to have little effect on forest health; however, there was concern that over a long time, even low levels of pollution may affect biodiversity of this important ecosystem. In contrast, severe decline of Norway spruce has been observed in the Tatra Mountains. Although bark beetle seems to be the immediate cause of that decline, long-term elevated levels of atmospheric N and S depositions and elevated O(3) could predispose trees to insect attacks and other stresses. European and US scientists studied pollution deposition, soil and plant chemistry, O(3)-sensitive plant species, forest insects, and genetic changes in the Retezat and Tatra Mountains. Results of these investigations are presented in a GIS format to allow for a better understanding of the changes and the recommendations for effective management in these two areas.     

Chloroethene dechlorination in acidic groundwater: Implications for combining fenton's treatment with natural attenuation

A sulfuric acid leak in 1988 at a chloroethene‐contaminated groundwater site at the Naval Air Station Pensacola has resulted in a long‐term record of the behavior of chloroethene contaminants at low pH and a unique opportunity to assess the potential impact of source area treatment technologies, which involve acidification of the groundwater environment (e.g., Fenton's‐based in situ chemical oxidation), on downgradient natural attenuation processes. The greater than 75 percent decrease in trichloroethene (TCE) concentrations and the shift in contaminant composition toward predominantly reduced daughter products (dichloroethene [DCE] and vinyl chloride [VC]) that were observed along a 30‐m groundwater flow path characterized by highly acidic conditions (pH = 3.5 ± 0.4) demonstrated that chloroethene reductive dechlorination can continue to be efficient under persistent acidic conditions. The detection of Dehalococcoides‐type bacteria within the sulfuric acid/chloroethene co‐contaminant plume was consistent with biotic chloroethene reductive dechlorination. Microcosm studies conducted with ¹⁴C‐TCE and ¹⁴C‐VC confirmed biotic reductive dechlorination in sediment collected from within the sulfuric acid/chloroethene co‐contaminant plume. Microcosms prepared with sediment from two other locations within the acid plume, however, demonstrated only a limited mineralization to ¹⁴CO₂ and ¹⁴CO, which was attributed to abiotic degradation because no significant differences were observed between experimental and autoclaved control treatments. These results indicated that biotic and abiotic mechanisms contributed to chloroethene attenuation in the acid plume at NAS Pensacola and that remediation techniques involving acidification of the groundwater environment (e.g., Fenton's‐based source area treatment) do not necessarily preclude efficient chloroethene degradation. © 2007 Wiley Periodicals, Inc.     

Using Ecological Footprints as a Policy Driver: The Case of Sustainable Construction Planning Policy in London

The heuristic value of the ecological footprint (EF) conceptual device has met with considerable political and civic buy-in at national, regional and local levels. It is seen as particularly valuable for visualizing ecological overshoot but debates about methodological soundness have undermined this potential. This paper examines the emerging opportunities for advanced footprinting approaches that use input-output analysis to test 'what if?' policy scenarios and hence turn EF into a proactive driver for sustainability-oriented policy development. It focuses on the London case and the specific arena of planning policy for sustainable construction.     

Evaluating the policy to restrict the potentially invasive black carp (Mylopharyngodon Piceus): A decision protocol with assurance bonding

The introduction of potentially invasive species is a concern to the public and the aquaculture industry. Used to protect channel catfish from infectious trematode infestations, the non-indigenous black carp has been evaluated by the US Fish and Wildlife Service (USFWS) and deemed potentially ‘injurious’ under the terms of the Lacey Act. Consequently, the black carp may be restricted from interstate commerce and eventually removed from US waters. An alternative approach to evaluating the risks posed by invasive species is considered and compared to that used by the USFWS. Short of outright restriction, reasonable options for management of such invasive species probably exist, including better use of environmental assurance bonds and return-deposit models.