Adjusting tapered element oscillating microbalance data for comparison with Federal Reference Method PM2.5 measurements in region 5

Continuous monitoring of particulate matter (PM) with a diameter less than 2.5 microm (PM2.5) is quickly gaining acceptance as an alternative means of measuring fine PM in the United States. For this project, data were taken from all monitoring sites within Region 5 that used the tapered element oscillating microbalance (TEOM) for PM2.5 and had a collocated Federal Reference Method (FRM) monitor. Scatter plots of TEOM versus FRM show that for a significant fraction of the observations, an independent factor causes the TEOM to underestimate the FRM value. This underestimation appears to increase as temperature decreases. For this analysis, a linear relationship was fit to the TEOM versus FRM data, allowing a break or knot in the relationship, modeled as a change of slope, at a site-specific temperature. To test whether the models are adequate for adjusting future measurements, models were also developed using the first year of data only, and the remaining observations were used to test the durability of the relationships. For all but one monitor in Minnesota, the models developed for each site had consistently high R2s, were predictive of future measurements, and could be used to derive "FRM-like" results from the TEOM measurements. The temperature knots fitted by the model for individual sites ranged from 12.9 to 20.6 degrees C. Data from all six sites in the state of Michigan were also combined to determine if a single model could be developed for the entire state. While the single model for the state of Michigan worked reasonably well, some of the predicted concentrations at individual sites were systematically underestimating the observed concentrations on more polluted days. The same conclusion was drawn for a Region 5-wide model. This approach was also found to work very well for six individual TEOM monitors in New York State.     

Environmental impacts of coastal aquaculture in eastern mediterranean bays the case of astakos gulf,Greece

GOAL, SCOPE AND BACKGROUND: Over the last decade Greece has become a leading country in the EU as concerns the cage farming of seabream and seabass. A strong debate has risen, however, about the environmental impacts of aquacultures in the coastal areas. The present paper deals with this problem and it is based on measurements of physico-chemical parameters in the water column, particulate matter and sediments in the area of Astakos Gulf, a coastal embayment in western Greece where three big fish farms are currently operating. METHODS: Water samples were collected by using Hydro-Bios sampling bottles, whereas a prototype sediment trap was installed under a fish cage for the collection of particulate matter. Temperature, dissolved oxygen, pH and salinity were measured in situ using portable equipment. Nutrients were determined by standard spectrophotometric methods. Trace metals were determined by Atomic Absorption Spectrometry. Dissolved organic carbon was determined by a Shimadzu 5000A carbon analyzer, whereas organic carbon in sediments was determined titrimetrically. RESULTS AND DISCUSSION: No clear eutrophication incidents have been identified, although the water column near the fish farms was enriched in nutrients and organic carbon. A sludge 'blanket' covers considerable parts of the seabed and is enriched in colloidal organic carbon and trace metals (Cd, Cu, Fe and Zn) that come from unused fish food. The biodegradation of this sludge leads to the development of anoxic conditions followed by the formation of undesirable gases, precipitation or remobilization of metals and the extinction of benthic fauna. CONCLUSION: The operation of fish farms at the coastal area of Astakos Gulf, and probably in similar Mediterranean gulfs, affects the marine environment, particularly in the vicinity of the cages. The most significant influence concerns the near-bottom water layer. The environmental impacts depend on the amount of food given to fishes, the mode of feeding, the fish density in cages, the annual production and the years of unit operation. The hydrology and the geomorphology of the area are also critical factors for its environmental quality. RECOMMENDATION AND OUTLOOK: The success of the fish-farming sector in the Mediterranean is accompanied by environmental and, in some extents, by social and marketing problems. These problems, derived from the rapid development of fish farming, can be solved only through an integrated management, using methods such as environmental impact assessment, risk assessment, economic evaluation, vulnerability assessments, resource accounting, cost-benefit analysis and outcome-based monitoring.     

Enhanced experimental flexibility and control in ecotoxicological mesocosm experiments--a new outdoor and indoor pond and stream system

Scope The German Federal Environmental Agency has put into operation a new modular mesocosm system consisting of eight outdoor and eight indoor ponds and streams in order to investigate fate and effects of chemicals and municipal wastewater in aquatic ecosystems. General design and special characteristics are given to demonstrate the wide range of possibilities for experimental research. - General design. Each of the 16 streams with riffle and pool sections can be varied in length up to 106 m. The streams can be run as circular or flow-through systems at a flow velocity of 0.02 to 0.6 m/s. Physico-chemical standard parameters are measured on-line. The 16 ponds, which can be connected to the stream systems, are equipped with drainage and pore water-sampling devices for simulating processes in the littoral zone including influent and effluent ground water flow. Perspectives Since the highly flexible and controllable construction also allows treating a wide range of hydrological and ecological experiments external institutions are invited to submit proposals.     

Toxicity of chemical components of fine particles inhaled by aged rats: effects of concentration

This study tested the hypothesis that exposure to mixtures containing fine particles and ozone (O3) would cause pulmonary injury and decrements in functions of immunological cells in exposed rats (22-24 months old) in a dose-dependent manner. Rats were exposed to high and low concentrations of ammonium bisulfate and elemental carbon and to 0.2 ppm O3. Control groups were exposed to purified air or O3 alone. The biological end points measured included histopathological markers of lung injury, bronchoalveolar lung fluid proteins, and measures of the function of the lung's innate immunological defenses (macrophage antigen-directed phagocytosis and respiratory burst activity). Exposure to O3 alone at 0.2 ppm did not result in significant changes in any of the measured end points. Exposures to the particle mixtures plus O3 produced statistically significant changes consistent with adverse effects. The low-concentration mixture produced effects that were statistically significant compared to purified air but, with the exception of macrophage Fc receptor binding, exposure to the high-concentration mixture did not. The effects of the low- and high-concentration mixtures were not significantly different. The study supports previous work that indicated that particle + O3 mixtures were more toxic than O3 alone.     

Mercury pollution and macrophage centres in pike (Esox lucius) tissues

From June 1993 to October 1994, studies have been carried out on the effects of mercury in the Oder River and pike tissue contamination (muscle, kidney, liver). The mean mercury contents in the sediment range from 0.03 to 1.1 mg/kg dry weight. In the pike muscle, between 0.22 and 0.85 mg/kg, on a wet weight basis, were found. The measured mercury concentrations were analysed in relation to the number of macrophage centres of the liver, spleen and kidney of the pike. Positive correlations between mercury and MC response (0.54 ≤ r ≤ 0.79, p < 0.05) were found in all of these organs. The suitability of the macrophage-centre-response as a possible bioindicator for mercury pollution is discussed in the literature. In our study, the response of MCs was found to be suitable as a biomarker for the impairment of fish health.     

Summer-time distribution of air pollutants in Sequoia National Park, California

Concentrations of air pollutants were monitored during the May November 1999 period on a network of forested sites in Sequoia National Park, California. Measurements were conducted with: (1) active monitors for nitric oxide (NO), nitrogen dioxide (NO2) and ozone (O3); (2) honeycomb denuder/filter pack systems for nitric acid vapor (HNO3), nitrous acid vapor (HNO2), ammonia (NH3), sulfur dioxide (SO2), particulate nitrate (NO3-), ammonium (NH4+), and sulfate (SO4(2-)); and (3) passive samplers for O3, HNO3 and NO2. Elevated concentrations of O3 (seasonal means 41-71 ppb), HNO3 (seasonal means 0.4-2.9 microg/m3), NH3 (seasonal means 1.6-4.5 microg/m3), NO3 (1.1-2.0 microg/m3) and NH4+ (1.0-1.9 microg/m3) were determined. Concentrations of other pollutants were low. With increasing elevation and distance from the pollution source area of O3, NH3 and HNO3 concentrations decreased. Ammonia and NH4+ were dominant N pollutants indicating strong influence of agricultural emissions on forests and other ecosystems of the Sequoia National Park.     

Concentration of LAS and boron in the Itter. Comparison of measured data with results obtained by simulation with the GREAT-ER software

The GREAT-ER software was used to calculate linear alkylbenzene sulphonate [LAS] and boron concentrations in the Itter stream in North Rhine-Westfalia, Germany. The aim was to investigate the predictive strength of this newly developed tool and to compare its results to measured data. Substance-specific input data which were used in this scenario were partly generic (e.g. LAS and sodium perborate tetrahydrate consumption figures for Germany) and partly (site-)specific data (e.g. half-life time for LAS elimination). The comparison with the measured data reveals that the model predictions for LAS and boron are correct at least within a factor of two, only if generic German consumption data is applied. By using refined input data, the accuracy can be increased further.     

Ash from the combustion of wood treated with inorganic wood preservatives: Element composition and leaching

Wood samples impregnated with inorganic wood preservatives containing the elements arsenic, boron, chromium, copper, fluorine, and/or zinc were burned in a furnace. Three different kinds of ash were collected: furnace, boiler, and so-called fly ash. Analyses showed that the ash contained large amounts of elements originating from the inorganic wood preservatives. Further interest was focused on the leachability of the above-mentioned elements. For this purpose a laboratory batch leaching test according to the German Standard DIN 38 414 part 4 was chosen. The results indicate that the leachability is in a range where the release of these elements to the environment from deposited ash can be considered as detrimental.     

The SeKT joint research project: definition of reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests

- In current biotest approaches, intact organisms or in vitro systems are exposed to sediments using different exposure scenarios. The most important issue in sediment toxicity testing protocols is the question which test phase (solid or liquid) should be used. Whole-sediment exposure protocols represent the most realistic scenario to simulate in situ exposure conditions in the laboratory. However, until now there is no agreement in how to acquire and to evaluate the data of the various available sediment contact assays. The SeKT joint research project was initiated with the aim to compare recently developed sediment contact assays by addressing reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests.     

Modelling of sequential groundwater treatment with zero valent iron and granular activated carbon

Multiple contaminant mixtures in groundwater may not efficiently be treated by a single technology if contaminants possess rather different properties with respect to sorptivity, solubility, and degradation potential. An obvious choice is to use sequenced units of the generally accepted treatment materials zero valent iron (ZVI) and granular activated carbon (GAC). However, as the results of this modelling study suggest, the required dimensions of both reactor units may strongly differ from those expected on the grounds of a contaminant-specific design. This is revealed by performing an analysis for a broad spectrum of design alternatives through numerical experiments for selected patterns of contaminant mixtures consisting of monochlorobenzene, tetrachloroethylene, trichloroethylene (TCE), cis-1,2-dichloroethylene (cis-DCE), and vinyl chloride (VC). It is shown that efficient treatment can be achieved only if competitive sorption effects in the GAC unit as well as the formation of intermediate products in the ZVI unit are carefully taken into account. Cost-optimal designs turned out to vary extremely depending on the prevailing conditions concerning contaminant concentrations, branching ratios, and unit costs of both reactor materials. Where VC is the critical contaminant, due to high initial concentration or extensive production as an intermediate, two options are cost-effective: an oversized ZVI unit with an oversized GAC unit or a pure GAC reactor.