Suspended particulate matter determines physical speciation of Fe,Mn, and trace metals in surface waters of Loire watershed

This study investigates the spatiotemporal variability of major and trace elements, dissolved organic carbon (DOC), total dissolved solids (TDS), and suspended particulate matter (SPM) in surface waters of several hydrosystems of the Loire River watershed in France. In particular, this study aims to delineate the impact of the abovementioned water physicochemical parameters on natural iron and manganese physical speciation (homoaggregation/heteroaggregation) among fine colloidal and dissolved (<?10 nm), colloidal (10–450 nm) and particulate (>?450 nm) phases in Loire River watershed. Results show that the chemistry of the Loire River watershed is controlled by two end members: magmatic and metamorphic petrographic context on the upper part of the watershed; and sedimentary rocks for the middle and low part of the Loire. The percentage of particulate Fe and Mn increased downstream concurrent with the increase in SPM and major cations concentration, whereas the percentage of colloidal Fe and Mn decreased downstream. Transmission electron microscopy analyses of the colloidal and particulate fractions (from the non-filtered water sample) revealed that heteroaggregation of Fe and Mn rich natural nanoparticles and natural organic matter to the particulate phase is the dominant mechanism. The heteroaggregation controls the partitioning of Fe and Mn in the different fractions, potentially due to the increase in the ionic strength, and divalent cations concentration downstream, and SPM concentration. These findings imply that SPM concentration plays an important role in controlling the fate and behavior of Fe and Mn in various sized fractions.

Physical speciation by heteroaggregation of (Fe-Mn) compounds: high [SPM]?→?[Fe-Mn] particulate faction; low {SPM]?→?[Fe-Mn] colloid-dissolved fraction.

     

Detailed PCB congener patterns in incinerator flue gas and commercial PCB formulations (Kanechlor)

In this study, we determined the detailed PCB congener patterns in flue gases from eight incinerators and four commercial PCB formulations (Kanechlors). About 160 PCB peaks were identified in samples using a DB-5 column and HRGC/HRMS. The concentration of incinerator stack emission gas ranged from 0.02 to 44 ngWHO-TEQ/Nm3. The ratios of dioxin-like PCBs in the total PCB concentration were from 3.4% to 25.7% and from 0.63% to 9.1% in stack emission gases and Kanechlor samples, respectively. The PCB congener profiles of Kanechlor samples were similar to those of previous studies. To determine characteristic congeners in flue gas and Kanechlor samples, principal component analysis (PCA) of the data was conducted using STATISTICA for Windows 5.0J (StatSoft, Inc.). As a result, we obtained four principal components (PCs) and accounted for 74% of the total variance. PC 1 was interpreted combustion, PC 2 and PC 3 were interpreted the difference in the number of substituted chlorines and, PC 4 could not be determined. Moreover, we obtained three groups according to the PCB congeners pattern among samples by PCA. These specific congeners that represent characteristics of each class were identified. These data will be useful for the source analysis of PCBs in the environment.     

Personal exposures and microenvironmental concentrations of particles and bioaerosols

The aim of this study was to compare the personal exposure to particles and bioaerosols with that measured by stationary samplers in the main microenvironments, i.e., the home and the workplace. A random sample of 81 elementary school teachers was selected from the 823 teachers working for two councils in eastern Finland for the winter time measurement period. Bioaerosol and other particles were collected on filters by button samplers using personal sampling and microenvironmental measurements in homes and workplaces. The 24-hour sampling period was repeated twice for each teacher. Particle mass, absorption coefficient of the filter and the concentration of viable and total microorganisms were analyzed from each filter. In this paper, the study design, quality assurance principles and results of particle and bioaerosol exposure are described. The results show that particle mass concentrations, absorption coefficient and fungi were higher in personal exposure samples than in home and workplace samples. Furthermore, these concentrations were usually lower in the home than in the workplace. Bacterial concentrations were highest in heavily populated workplaces, while the viable fungi concentrations were lowest in workplaces. The fungi and bacteria results showed high variation, which emphasises the importance of quality assurance (duplicates and field blanks) in the microbial field measurements. Our results indicate that personal exposure measurements of bioaerosols in indoor environments are feasible and supplement the information obtained by stationary samplers.     

Both reindeer management and several other land use factors explain the reduction in ground lichens (Cladonia spp.) in pastures grazed by semi-domesticated reindeer in Finland

Roles of intensive reindeer grazing and several additional land use factors in the reduction in ground lichens (Cladonia spp.) in pastures grazed by the semi-domesticated reindeer have been argued in Finland. Our analysis showed that several factors and processes explain the standing biomass of lichens (during 2005–2008) and the recent changes in this biomass (after 1995–1996) on lichen pastures located in the 20 northernmost herding districts in Finland. The higher the long-term reindeer densities on the lichen pastures the lower was the lichen biomass. The lichen biomass was also strongly affected by the grazing system; the lowest biomass values of lichens were measured in all grazing areas that were used in the snow-free seasons. The lichen biomass in pine forests less than 80 years old and in all mountain type lichen pastures was lower than that in mature and old pine forests. The lichen biomass also decreased as the proportion of arboreal lichen pastures within a district decreased and the proportion of human infrastructure increased. The aerial drift of heavy metals from the Kola Peninsula appeared to reduce lichens in a small north-eastern part of the study area. Increases in summer precipitation and winter temperatures increased the amount of lichens, but increases in summer temperatures and winter precipitation had the opposite effect. Reindeer densities, grazing system, pasture type and the previous abiotic factors were also associated with the reduction in lichen biomass between the inventories. We conclude that several local, regional and even global factors and processes affect the state of reindeer pastures in large and complex grazing ecosystems. Therefore, more comprehensive research and management strategies for the entire reindeer herding environment are needed.     

Electromigration of arsenic and co-existing metals in mine tailings

The aim of this study was to investigate the feasibility of enhanced electrokinetic remediation technology for controlled leaching and collection of labile arsenic fractions from mine tailings. Direct current was applied to tailings for 20 d using ammonium oxalate and sodium hydroxide as enhancement solutions. Migration of arsenic was observed, resulting in 63-71% removal near the cathode but only 6-17% overall removal in the entire tailings matrix in 20 d. However, significant migration of arsenic towards the anode and accumulation in a collection well near the anode was observed, especially under alkaline conditions. Thus, treatment time and consumption of chemicals could probably be reduced by installing specific collection or adsorption zones near the anode. A relationship between electrokinetic mobility of arsenic and other elements and their extractability in sequential extraction tests was established, indicating that dissolution or desorption of the elements and thermodynamic conditions (pH and Eh gradient) played a bigger role in the electrokinetic removal process than electromigration of soluble ions.     

Isolation and identification of fungi tolerant to polycyclic aromatic hydrocarbons and coal tar from different habitats in Lithuania

A group of 36 fungal strains, belonging to the Lithuanian mycobiota, was collected and isolated from different locations, habitats, and matrices, including creosote-treated wood in storage yards for crosstie wastes. The eight most perspective strains selected according to preliminary assessment of tolerance to coal tar were subsequently identified combining taxonomical evaluation and molecular techniques. The tolerance of the eight identified fungal species (five basidiomycetes and three ascomycetes) to the presence of various concentrations of coal tar, and for the four most perspective fungal strains (Pleurotus sp., Schizophyllum sp., Irpex lacteus, Bjerkandera adusta) to polycyclic aromatic hydrocarbons was evaluated. The ligninolytic enzymatic activity assay of the isolated strains resulted in a good correspondence between the tolerance to pollutants and the capability to produce ligninolytic enzymes indicating that this group of white-rot fungi is perspective for further investigation and eventual usage for mycoremediation of polycyclic aromatic hydrocarbons polluted substrates.     

Complexing agents in waste waters of finnish electrolytic and chemical surface treatment plants

Goal, Scope and Background  Complexing agents are one of the major environmental concerns in electrolytic and chemical surface treatment (ECST) industry; e.g. the EU reference document on the best available technology (BREF) pays special attention to the usage of EDTA. However, no comprehensive studies are available on usage of EDTA or other complexing agents or their load to the receiving waters from ECST industry. In this study, the concentrations of complexing agents were analyzed to get an overview of their usage and load and also to recognize their relevance in the environmental permitting and compliance monitoring of such facilities. Methods  Complexing agent concentrations of treated waste water samples of 23 ECST plants with vat volume exceeding 30 m³ was studied. HPLC and GC-MS were used to analyze and identify complexing agent concentrations, ICP-AES to analyze metals, and TOC to analyse the organic load. The number of the plants in this study equals around 50% of such installations in Finland subject to environmental permit as the IPPC directive provides. Results  EDTA, DTPA, and NTA were found in 11 samples out of 23 mainly in rather small concentrations. Their annual load to the receiving waters may be estimated to be 0.3 tons and the total load from Finnish ECST industry can be extrapolated to be up to 1 ton. Compared to the estimated use of 5–10 tons in the industry this finding is rather low, even though in Finland cast-off treatment baths are typically delivered to the hazardous waste treatment plants. Discussion  Since the load of complexing agents is rather low, the chemical waste water treatment seems to be either capable of reducing complexing agent concentrations to some extent or their usage is lower than expected. On the other hand, it is possible that not all complexing agents were identified from the samples. The metal concentrations and TOC were well hand in hand with concentrations found in the Finnish environmental database, which proves that the samples were of average quality of the waste water from the facilities. Conclusions  According to the results, complexing agents cannot be considered as an environmental risk in the ECST industry in Finland; EDTA concentrations are clearly below PNEC_aqua (2.2 mg/l) and the total discharge is very marginal compared to the discharge from the pulp and paper industry. However, DPTA seems to be as commonly used as EDTA, but also biodegradable NTA was found. Recommendations and Perspectives  Since EDTA has gained plenty of attention in the BREF, DTPA and other, poorly biodegradable complexing agents should also be taken into account when the BREF is updated within a few years. Also an EU risk assessment report especially for DTPA should be supplied, since its use is obviously increasing.     

The Decision Analysis Interview Approach in the Collaborative Management of a Large Regulated Water Course

There are always conflicting goals in the management of large water courses. However, by involving stakeholders actively in the planning and decision-making processes, it is possible to work together toward commonly acceptable solutions. In this article, we describe how we applied interactive multicriteria decision analysis (MCDA) in a collaborative process which aimed at an ecologically, socially, and economically sustainable water course regulation policy. The stakeholders' opinions about the alternative regulation schemes and the relative importance of their impacts were elicited with the HIPRE software. Altogether, 20 personal interactive decision analysis interviews (DAIs) were carried out with the stakeholders. Our experience suggests that the DAIs can considerably improve the quality and efficiency of the collaborative planning process. By improving communication and understanding of the decision situation in the steering group, the approach helped to develop a consensus solution in a case having strong conflicts of interest. In order to gain the full benefits of the MCDA approach, interactive preference elicitation is vital. It is also essential to integrate the approach tightly into the planning and decision-making process. The project's home pages are available to the public at http://www.paijanne.hut.fi/.     

Ultraviolet light-emitting diodes in water disinfection

Background, aim, and scope  The novel system of ultraviolet light-emitting diodes (UV LEDs) was studied in water disinfection. Conventional UV lamps, like mercury vapor lamp, consume much energy and are considered to be problem waste after use. UV LEDs are energy efficient and free of toxicants. This study showed the suitability of LEDs in disinfection and provided information of the effect of two emitted wavelengths and different test mediums to Escherichia coli destruction. Materials and methods  Common laboratory strain of E. coli (K12) was used and the effects of two emitted wavelengths (269 and 276 nm) were investigated with two photolytic batch reactors both including ten LEDs. The effects of test medium were examined with ultrapure water, nutrient and water, and nutrient and water with humic acids. Results  Efficiency of reactors was almost the same even though the one emitting higher wavelength had doubled optical power compared to the other. Therefore, the effect of wavelength was evident and the radiation emitted at 269 nm was more powerful. Also, the impact of background was studied and noticed to have only slight deteriorating effect. In the 5-min experiment, the bacterial reduction of three to four log colony-forming units (CFU) per cubic centimeter was achieved, in all cases. Discussion  When turbidity of the test medium was greater, part of the UV radiation was spent on the absorption and reactions with extra substances on liquid. Humic acids can also coat the bacteria reducing the sensitivity of the cells to UV light. The lower wavelength was distinctly more efficient when the optical power is considered, even though the difference of wavelengths was small. The reason presumably is the greater absorption of DNA causing more efficient bacterial breakage. Conclusions  UV LEDs were efficient in E. coli destruction, even if LEDs were considered to have rather low optical power. The effect of wavelengths was noticeable but the test medium did not have much impact. Recommendations and perspectives  This study found UV LEDs to be an optimal method for bacterial disinfection. The emitted wavelength was found to be an essential factor when using LEDs; thus, care should be taken in selecting the proper LED for maximum disinfection.     

Degradation of chelating agents in aqueous solution using advanced oxidation process (AOP)

This article presents an overview with critical analysis of technical applicability of advanced oxidation process (AOP) in removing chelating agents from aqueous solution. Apart from the effect of metals for chelating agents as a major influencing factor, selected information such as pH, oxidant’s dose, concentrations of pollutants and treatment performance is presented. The performance of individual AOP is compared. It is evident from our literature survey that photocatalysis with UV irradiation alone or coupled with TiO₂, ozonation and Fenton’s oxidation are frequently applied to mineralize target pollutants. Overall, the selection of the most suitable AOP depends on the characteristics of effluents, technical applicability, discharge standard, regulatory requirements and environmental impacts.