Body condition and the grouping behavior of brood-caring female common eiders (<Emphasis Type="Italic">Somateria mollissima</Emphasis>)

Both theoretical and empirical work has shown that group size increases with increasing ecological constraints on solitary breeding. Ecological constraints refer to extrinsic factors such as availability of breeding sites, food or mates. Common eider (Somateria mollissima) females pool their broods and share brood-rearing duties, or rear broods alone. Females are often in poor condition at hatching, as incubation is accomplished without feeding, and variation in body condition is largely environmentally induced and thus unpredictable. We found that the intensity of and duration of parental care that females provide is positively correlated with their body condition at hatching. This suggests that body condition is an ecological constraint on successful solitary breeding. We further observed that group productivity in common eider broods is a decelerating function of the number of tending females. As predicted, females in poorer condition (i.e., facing stronger ecological constraints) were found in larger groups. This result is straightforward if solitary tenders can enter any group at no cost. However, if entry is group-controlled, stable groups of non-relatives are predicted not to occur when per capita reproduction declines with group size. The N-person staying incentive model permits groups to form under these conditions, because reproduction is unevenly divided between dominants and subordinates in the group. We discuss the plausibility of these alternative models of group size for understanding the grouping behavior of brood-caring female common eiders.Communicated by M. Webster     

Is asynchronous hatching adaptive in herring gulls (Larus argentatus)?

Hatching asynchrony commonly induces a size hierarchy among siblings and the resultant competition for food between siblings can often lead to starvation of the smallest chicks within a brood. We created herring gull (Larus argentatus) broods with varying degrees of hatching synchrony by manipulating the timing of incubation while maintaining the originally laid eggs. The degree of hatching asynchrony affected sibling size hierarchy at the time of hatching of the last-hatched ”c-chick.” In unmanipulated broods, there was no disadvantage of being a c-chick. However, when asynchrony was experimentally increased, we found reduced survival of the c-chick only in the exaggerated asynchronous experimental group. The effects were observable only during the first 10 days of chick life. We recorded no cases of the chicks dying of starvation. Furthermore, behavioral observations indicated that there was no sibling competition, and no selective feeding of larger sibs in the study colony. We propose that the observed lower survival rates of c-chicks in exaggerated asynchronous broods resulted from their lesser motor abilities, affecting their chances of escaping predators. Fledging success for the whole colony was generally high and almost half of all pairs fledged all three chicks, which is indicative of a good feeding environment. We argue that normal hatching asynchrony is a favorable solution in a good feeding environment, but that increased asynchrony reduces breeding success. We do not view asynchrony in the herring gull as an adaptation for brood reduction and propose instead that it may come about because there has been selection for incubation to start before clutch completion. Received: 14 April 1999 / Received in revised form: 20 October 1999 / Accepted: 23 January 2000     

Zeolites relieves inhibitory stress from high concentrations of long chain fatty acids

Protein and fat rich slaughterhouse waste is a very attractive waste stream for the production of biogas because of the high biochemical methane potential of the substrate. The material has however some drawbacks as the sole material for biogas production due to the production of several process disturbing metabolites such as ammonia, sulfides and long chain fatty acids. We can in this work present results that show that zeolites have the potential to relieve inhibitory stress from the presence of long chain fatty acids. Moreover, the results strongly indicate that it is mainly acetic acid consumers that are most negatively affected by long chain fatty acids and that the mechanism of stress relief is an adsorption of long chain fatty acids to the zeolites. In addition to this, it is shown that the effect is immediate and that only a small amount of zeolites is necessary to cancel the inhibitory effect of long chain fatty acids.     

Solid phase microextraction (SPME) as an effective means to isolate degradation products in polymers

A new sample preparation technique, solid phase microextraction (SPME), was compared with direct headspace-GC-MS with respect to the type and amount of identified compounds. Three types of LDPE films containing photosensitising additives according to the Scott-Gilead patents and pure LDPE were used as model substances. The polyethylene films were thermally aged at 80‡C after the induction period was surpassed by subjecting the materials to 100 h of UV radiation. The new SPME method was developed using nonpolar poly(dimethylsiloxane) and polar carbowax fibers to extract the low molecular weight products formed in the polyethylene films during aging. Many more products were identified after SPME followed by GC-MS than after direct headspace-GC-MS of the samples. The SPME method allowed the identification of homologous series of carboxylic acids, ketones, and furanones, while direct headspace-GC-MS identified only a few carboxylic acids (C1-C6) and small amounts of some ketones and furanones. In general, SPME was more effective in extracting less volatile products, and in particular, the polar carbowax fiber identified also C7-C12 carboxylic acids and 4-oxopentanoic acid. By SEC and FTIR we confirmed that the number and amount of former degradation products correlated well with the decrease in molecular weights and the amount of formed carbonyl compounds.     

Airborne thermal degradation products of polyurethene coatings in car repair shops

A methodology for workplace air monitoring of aromatic and aliphatic, mono- and polyisocyanates by derivatisation with di-n-butylamine (DBA) is presented. Air sampling was performed using midget impinger flasks containing 10 ml of 0.01 mol l(-1) DBA in toluene and a glass-fibre filter in series after the impinger flask, thereby providing the possibility of collecting and derivatising isocyanates in both the gas and particle phases. Quantification was made by LC-MS, monitoring the molecular ions [MH]+. Air samples taken with this method in car repair shops showed that many different isocyanates are formed during thermal decomposition of polyurethane (PUR) coatings. In addition to isocyanates such as hexamethylene (HDI), isophorone (IPDI), toluene (TDI) and methylenediphenyl diisocyanate (MDI), monoisocyanates such as methyl (MIC), ethyl (EIC), propyl (PIC), butyl (BIC) and phenyl isocyanate (PhI) were found. In many air samples the aliphatic monoisocyanates dominated. During cutting and welding operations, the highest levels of isocyanates were observed. In a single air sample from a welding operation in a car repair shop, the highest concentrations found were: MIC, 290; EIC, 60; PIC, 20; BIC, 9; PhI, 27; HDI, 105; IPDI, 39; MDI, 4; and 2,4-TDI and 2,6-TDI 140 microg m(-3). Monitoring the particle size distribution and concentration during grinding, welding and cutting operations showed that ultrafine particles (< 0.1 microm) were formed at high concentrations. Isocyanates with low volatility were mainly found in the particle phase, but isocyanates with a relatively high volatility such as TDI, were found in both the particle and gas phases.     

Solvent-free sampling with di-n-butylamine for monitoring of isocyanates in air

The solvent-free sampler for airborne isocyanates consisted of a polypropylene tube with an inner wall coated with a glass fibre filter, coupled in series with a 13 mm glass fibre filter. The filters were impregnated with reagent solution containing equimolar amounts of di-n-butylamine (DBA) and acetic acid. Air sampling was performed with an air flow of 0.2 l min(-1). The formed isocyanate-DBA derivatives were determined using liquid chromatography and tandem mass spectrometry. The sampler was investigated in regard to collection principle and extraction of the formed derivatives with good results. The possibility to store the sampler before sampling and to perform long-term sampling was demonstrated. Field extraction of the sampler was not necessary, as there was no difference between immediately extracted samples and stored ones (2 days). In comparative studies, the sampler was evaluated against a reference method, impinger-filter sampling with DBA as reagent. The ratios between the results obtained with the sampler and the reference in a test chamber at a relative humidity (RH) of 45% was in the range of 83-109% for isocyanates formed during thermal decomposition of PUR. At RH 95%, the range was 72-101% with the exception of isocyanic acid. In two field evaluations, the ratios for fast curing 2,4'- and 4,4'-methylene bisphenyl diisocyanate (MDI) was in the range 81-113% and for the 3-ring MDI the range was 54-70%. For the slower curing 1,6-hexamethylene diisocyanate (HDI) and HDI isocyanurate, the ratios were in the range 78-145%. In conclusion, the solvent-free sampler is a convenient alternative in most applications to the more cumbersome impinger-filter sampler.     

Historical pollution of seldom monitored trace elements in Sweden--Part B: sediment analysis of silver, antimony, thallium and indium

Sediment cores from four boreal and remote lakes in a south to north transect in central Sweden were analysed for acid leachable silver, antimony, thallium and indium in the solid sediment phase and the corresponding porewater. Dating of the cores was made by their content of acid leachable lead and the (206)Pb/(207)Pb ratio, in one lake also by (210)Pb. The impact of diagenesis on element redistribution in the sediments was included and found to be minor except for thallium. The results show lowered concentrations towards the north and most intense accumulation after the Second World War, which is taken as evidence for atmospheric deposition being the primary source. Indium has declining concentrations in recent strata while silver and antimony increase. Thallium has lowered acid-leachable concentrations in recent strata. For all metals the impact of domestic industrialisation as well as the early industrialisation of central Europe is discernible. Only thallium appears to reach a geological background at depths that correspond to the late 18th century. For the other metals elevated levels are concluded.     

The effect of light and iron(II)/iron(III) on the distribution of Tl(I)/Tl(III) in fresh water systems

The distribution of aqueous Tl(I)/Tl(III) as a function of light exposure and solution properties was studied by quantifying the oxidation states after separation with ion chromatography and on-line detection with ICP-MS. Ultraviolet irradiation of aqueous solutions containing 1 microg l(-1) Tl(III) and in equilibrium with the atmosphere increases the reduction rate. In systems with photoreduction of Fe(III)(aq) a quantitative oxidation of Tl(I)(aq) was observed, notably at low pH. The process is reversible, as indicated by formation of Tl(I) when the irradiated systems were kept in the dark. In systems with colloidal silica-stabilised ferrihydrite, UV irradiation also leads to oxidation of Tl(I)(aq), but not quantitatively. It is suggested that adsorption of thallium to the ferrihydrite determines the rate of oxidation. Detectable, but not quantitative, oxidation of Tl(I)(aq) took place when natural water samples with 1 microg l(-1) Tl(I)(aq) were exposed to either sunlight or UV-light. For these samples, the reduction was not quantitative when they were kept in the dark for 24 h. The results suggest that the light dependent iron cycle in fresh water systems strongly influences the redox state of thallium.     

End-Of-Life Textiles as Reinforcements in Biocomposites

A number of attempts have been made to recycle cotton/polyester blend woven fabrics after use; however, most of these fabrics are disposed of in landfills. Major part of these blend fabrics are not recycled due to complexity of the fibre arrangement and cannot be separated economically. This study shows that these discarded woven fabrics could be directly used as reinforcements in composites without fibre separation. Uniform alignment in the woven fabric provided consistent properties to the composites. The fabrics were reinforced by soybean-based-bioresins to produce biocomposites. The composites were analysed for mechanical, thermal, viscoelastic and morphological properties. Porosity and wettability of the composites were also evaluated. Results demonstrate that the tensile strength and modulus of over 100 and 10 MPa, respectively, can be obtained without any fibre treatment. Furthermore, impact strength over 70 kJ/m² was obtained without any chemical treatment on fibres. The porosity of the composites produced was less than 9 vol%. Additionally, the fabrics were treated with alkali in order to improve the fibre–matrix interface and the composite properties were studied. From the economical perspective, these composites can be produced at a low cost as the major component is available for free or low cost.