A framework for valuing the health benefits of improved bathing water quality in the River Irvine catchment

A simple model predicting bathing water concentrations of Escherichia coli from livestock in the Irvine catchment in SW Scotland has been adapted for intestinal enterococci (IE). This has been used to predict risk of bather illness by extrapolation of published data on bather IE exposure vs incidence of gastro-enteritis. Simulated reduction in the risk of illness by reduced faecal loading was multiplied by a willingness to pay for risk reduction to estimate the annual benefits of mitigation. Health benefits of reducing loading by 75% at Irvine Beach were estimated by a willingness to pay method to be about pound 276k pa. Estimated annualised costs of diffuse pollution mitigation measures across the catchment were higher (> pound 1m), and it is very unlikely that 75% mitigation is achievable with current stocking rates. Further work should explore the influence of uncertainty of model parameters, and use emerging epidemiological information on specific zoonotic pathogens such as E. coli O157 and Cryptosporidium. Other components of the value of clean water should also be included to obtain a complete estimate of the cost:benefit of mitigation.     

Cadmium stress alters gene expression of DNA mismatch repair related genes in Arabidopsis seedlings

Cadmium (Cd) is a non essential element, and is a widespread environmental pollutant. Exposure to Cd can result in a variety of adverse health effects in plant and humans. In the current study, Arabidopsis seedlings were used as a bio-indicator of Cd pollution. Seedlings were grown on MS media containing 0-6.0 mg L(-1) Cd for 18 days, and the gene expression patterns were used to link increased Cd exposure with progressive biological effects. Reduction of total soluble protein content in shoots of the Arabidopsis seedlings occurred with increase in Cd concentrations. For the gene expression patterns, seven genes known to be involved in cell division and DNA mismatch repair (MMR) system were investigated by semi-quantitative RT-PCR, and normalized using 18S rRNA gene expression. Expression of the proliferating cell nuclear antigen 2 (atPCNA 2), MutS 3 homolog (atMSH 3) and MutL1 homolog (atMLH1) genes in shoots of Arabidopsis was strongly induced by exposure to 0.75 mg L(-1) Cd, but were repressed by other Cd concentrations whereas exposure to 0.75-6 mg L(-1) of Cd resulted in a decreased expression of atPCNA1, atMSH 2, 6 and 7 genes independently of any observable biological effects, including survival, fresh weight and chlorophyll level of shoots. This work demonstrated that specific gene expression changes could serve as useful molecular biomarkers indicative of Cd exposure and related biological effects.     

An evaluation of global QSAR models for the prediction of the toxicity of phenols to Tetrahymena pyriformis

This study presents an analysis of the ability of a two-parameter response surface, a multiple linear regression and a neural network model to produce global quantitative structure-activity relationships (QSARs) to predict the toxic potency of phenols to Tetrahymena pyriformis. The phenolic toxicity data set analysed is characterised by multiple mechanisms of toxic action. The study aimed to evaluate the confidence that can be applied to the modelling of the differing mechanisms of action. Assessment of confidence was decided in terms of whether the statistics for the global models reflect the ability of the QSARs to model the individual mechanisms of toxic action present in the data set. The results showed that the global statistics only reflected the ability of models to predict the two non-covalent mechanisms (polar narcosis and respiratory uncoupling), with the metabolically transformed and electrophilic mechanism (pre-electrophiles and soft electrophiles) being modelled poorly by all three model building methods. The results confirm the difficulty in modelling electrophilic mechanisms of toxic action. The results also highlight the fact that this poor predictivity is often 'hidden' in good statistical fit of some global models. In particular these results emphasise that for practical predictive purposes the mechanistic applicability domain is required to give confidence to estimated toxicity values.     

Mixing-controlled biodegradation in a toluene plume--results from two-dimensional laboratory experiments

Various abiotic and biotic processes such as sorption, dilution, and degradation are known to affect the fate of organic contaminants, such as petroleum hydrocarbons in saturated porous media. Reactive transport modeling of such plumes indicates that the biodegradation of organic pollutants is, in many cases, controlled by mixing and therefore occurs locally at the plume's fringes, where electron donors and electron-acceptors mix. Herein, we aim to test whether this hypothesis can be verified by experimental results obtained from aerobic and anaerobic degradation experiments in two-dimensional sediment microcosms. Toluene was selected as a model compound for oxidizable contaminants. The two-dimensional microcosm was filled with quartz sand and operated under controlled flow conditions simulating a contaminant plume in otherwise uncontaminated groundwater. Aerobic degradation of toluene by Pseudomonas putida mt-2 reduced a continuous 8.7 mg L(-1) toluene concentration by 35% over a transport distance of 78 cm in 15.5 h. In comparison, under similar conditions Aromatoleum aromaticum strain EbN1 degraded 98% of the toluene infiltrated using nitrate (68.5+/-6.2 mg L(-1)) as electron acceptor. A major part of the biodegradation activity was located at the plume fringes and the slope of the electron-acceptor gradient was steeper during periods of active biodegradation. The distribution of toluene and the significant overlap of nitrate at the plume's fringe indicate that biokinetic and/or microscale transport processes may constitute additional limiting factors. Experimental data is corroborated with results from a reactive transport model using double Monod kinetics. The outcome of the study shows that in order to simulate degradation in contaminant plumes, detailed data sets are required to test the applicability of models. These will have to deal with the incorporation of existing parameters coding for substrate conversion kinetics and microbial growth.     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

Identifying the largest individual sample value from a two-way composite sampling design

Composite sampling techniques for identifying the largest individual sample value seem to be cost effective when the composite samples are internally homogeneous. However, since it is not always possible to form homogeneous composite samples, these methods can lead to higher costs than expected. In this paper we propose a two-way composite sampling design as a way to improve on the cost effectiveness of the methods available to identify the largest individual sample value.     

Passivsammler zur Wasseruntersuchung

The topography and motion of contaminant plumes in groundwater may be determined by surveying the three-dimensional distribution of contaminant freights [1] as well as through a period-integral monitoring by contaminant dosimeters [1]. Conventional methods of taking water samples for chemical analysis cannot fulfill any of these requirements. Sorption active passive collectors suitable for corresponding surveys in gaseous phases are unsuitable for examination in aquifers. Passive collectors for the examination of undisturbed aquifers represent the central part of a probing device system developed by the authors for monitoring chemical and hydraulic parameters within all kinds of aquifers. These passive collectors permit both a determination of the relative contaminant freights at deliberate vertical spacing of vertically ordered measuring points, and period-integrating detection of vertical profiles of relative contaminant freights. The easy-to-handle passive collectors are suitable for the collection of organic and inorganic contaminants and may be evaluated by standardized chemical analysis methods. In this way, passive collectors fulfill the essential prerequisites for purpose-oriented monitoring of contaminant plumes. Moreover, passive collectors for ground water monitoring are well suited for the in situ-examination of any other aquifer, both still and fluent, regardless of its depth or extent. Examples of application may be sewage ducts, sewage plants, rivers, lakes, oceans, water samples and especially the identification of contaminants and trace substances.     

Ontogenetic variation in metabolism, biochemical composition and energy content during the early life stages of Farfantepenaeus paulensis (Crustacea: Decapoda: Penaeidae)

Dry weight (DW), oxygen consumption, ammonia-N excretion, proximate biochemical composition (total protein, carbohydrate, lipid, water and ash), and energy content (estimated from biochemical composition and by wet combustion) were determined in early developmental stages of cultured Farfantepenaeus paulensis. Pooled samples from embryonic, larval and postlarval stages (at 26 ± 1 °C and 34 ± 1‰) were used for measurements. The study focused on physiological and biochemical processes during transitional periods of ontogeny, such as hatching, lecithotrophic and planktotrophic stages, metamorphosis, and the attainment of a benthic existence in postlarva. DW showed higher increment between protozoea I (PZ I) and mysis I (M I) than in the next mysid and postlarval stages. Individual rates of oxygen consumption and ammonia-N excretion increased, while weight-specific rates presented significant reduction throughout development. Higher weight-specific oxygen consumption was registered in nauplius III (N III) and PZ I, following a decrease in subsequent stages. Postlarval stages PL V–VI and PL X–XII exhibited the lowest values among the stages studied. Weight-specific excretion was high in N III and protozoeal stages, with maximum values in PZ II, while the following stages were marked by lower rates. O:N ratios indicated higher protein catabolism in the stages between egg and M I and a shift to more lipid utilization close to metamorphosis. Water content was higher in the protozoeal stages and decreased afterwards. Higher percentages of protein, lipid and carbohydrate (%DW) were observed in egg and nauplius stages. Protein and lipid decreased from the egg through the naupliar and protozoeal stages, rising again in mysis stages. Lipid content (%DW) decreased in PL V–VI and PL X–XII. Lipid:protein ratios showed an increase of the importance of lipid between PZ III and M II. Carbohydrates represented a minor fraction of body composition, and ash percentages increased from egg to a maximum in PZ II, decreasing in subsequent stages. Energy content determined by wet combustion or calculated by energy equivalents presented the same trend throughout development, varying similarly to protein. Protein was the main energy contributor to body energy in all stages, while the importance of lipid was higher in egg and early naupliar stages. Trends observed in metabolic rates and body composition may be associated to morphological and behavioral changes during the early stages of penaeid development, such as the transition from herbivory to omnivory, and the adoption of a benthic existence. Different ontogenetic energy strategies contribute to succeed through such diverse type of development. Received: 4 July 2000 / Accepted: 6 December 2000     

Environmental levels of sediment-associated tri-n-butyltin chloride (TBTCl) and ionic regulation in flounders during seawater adaptation

The effects of exposure to sediment-associated tri-n-butyltin chloride (TBTCl) were examined in the euryhaline European flounder, Platichthys flesus (L.). The effects were quantified by measuring the changes in sodium efflux; Na⁺/K⁺-ATPase activity; and the numbers, areas, and distribution of chloride cells in the gills of freshwater-adapted fish, following a rapid transfer to seawater. Following the transfer to seawater, the Na⁺/K⁺-ATPase activity and the sodium efflux were significantly increased in the control group but remained unchanged in the TBTCl-exposed group. The normal morphological changes to the gill epithelium associated with seawater adaptation, which involve chloride cell distribution, took place in the control group but were significantly inhibited or delayed in the TBTCl group. The results presented in this study lead to the conclusion that environmental concentrations of tri-n-butyltin chloride in sediments are capable of significantly disrupting both the physiological and the morphological components of iono-regulatory functions of an estuarine flatfish.