三维电极法处理含钴、锰废水

采用三维电极法对工业精对苯二甲酸(PTA)装置产生的含钴、锰废水进行处理.通过与传统二维电极法的处理效果进行比较,论证了三维电极法脱除Co2+,Mn2+的优越性.探究了填料类型、极板间电压、粒子电极填充比(粒子电极质量(g)与废水体积(mL)的比)、极板间距等工艺参数对Co2+,Mn2+脱除率的影响.实验结果表明,适宜...     

改性蒙脱石-壳聚糖絮凝剂处理造纸废水

将改性蒙脱石(MM)和壳聚糖(CTS)制成MM-CTS新型复合絮凝剂,对造纸废水进行絮凝处理.实验结果表明,当MM-CTS的加入量为0.10 mg/L、m(MM):m(CTS):40:1、pH=8.0、搅拌速率为140 r/min、沉降时间为15 min时,絮凝效果最佳,对造纸废水的COD去除率达66.35%,较传统絮凝剂的COD去除率提高了13.7%,药剂成本下降11.1%,具有明显的经济与环境效益.     

Rheology of Concentrated Cellulose Solutions in 1-Butyl-3-methylimidazolium Chloride

Rheological behavior of the concentrated cellulose/1-butyl-3-methylimidazolium chloride ([BMIM]Cl) solutions was investigated. As polymeric fluid, solutions of cellulose in [BMIM]Cl display a marked elastic behavior under shear flow. The dependence of the shear viscosity η, and of the dynamic modulus, on concentration, average degree of polymerization (DP) and temperature is discussed. At lower concentrations and degrees of polymerization (DP), cellulose solutions show viscous, inelastic behavior at low frequencies and low shear rate. At higher concentration and DP, cellulose solutions are more elastic at higher frequencies and shear rate. Such solutions also have some usual rheological properties. The dynamic rheological responses revealed that the Cox–Merz rule did not hold for these cellulose solutions at high deformation rate. Plotting storage modulus G′ against loss modulus G″ gave almost a master curve which is independent of temperature and concentration, with the slope of about 1.651 for 10 wt% cellulose solutions. This value indicates the existence of microheterogeneity in the solution system.     

Adsorption of lambda-cyhalothrin and cypermethrin on two typical Chinese soils as affected by copper

Background, aim, and scope  Pesticides and heavy metals pollution in soil environment has become a serious problem in many countries including China. Repeated applications of bordeaux mixture (a blend of copper sulfate and calcium hydroxide) and pyrethroid (Pys) insecticides have led to elevated copper (Cu) and Pys concentrations in vineyard surface soils. However, few studies focused on the interaction of Pys and heavy metals in the soil environment. Our previous studies had indicated the combined effect of cypermethrin (CPM) and Cu on soil catalase activity. Also, we had suggested that the addition of Cu could catalyze photo-degradation of CPM and lambda-cyhalothrin (λ-CHT) in aqueous solution and restrain their degradation in soil. To better understand the potential influence of Cu on the fate of Pys in the soil environment, the aim of the present work was to examine the effect of Cu on the adsorption of λ-CHT and CPM on two typical Chinese soils with different soil characteristics, which was one of the key processes controlling the fate of Pys, and to provide more information about the potential ecological risk of chemicals on the soil ecosystem. Fourier transform infrared and point charges analysis using the MOPAC program of the Gaussian system were also used to reveal the probable adsorption mechanism of λ-CHT and CPM on soils. Materials and methods  Two vineyard soils with different properties were chosen as experimental samples. They were sampled from 0 to 10 cm, dried, and sieved to 2 mm. Each soil was spiked with copper sulfate solution to obtain the following total soil Cu concentrations: 100, 200, 400, 800, and 1,600 mg·kg⁻¹. The treated soils were incubated for 2 weeks and then dried at 20°C. For each soil sample and at each soil Cu concentration, the adsorption of λ-CHT and CPM was measured using a batch equilibrium method. The concentration of λ-CHT was determined by HPLC, and the amount of λ-CHT and CPM adsorbed by the soil sample at equilibrium was determined by the difference between the initial and equilibrium concentrations in solution corrected by the blank adsorption measurement. Results  Without the addition of Cu, the adsorption of λ-CHT and CPM on Black soil is greater than that on Red soil, while the adsorption of λ-CHT on both soils is significantly stronger than that of CPM. As the soil Cu concentration increased from 19 (or 18; background) to 1,600 mg·kg⁻¹, the adsorption coefficient (K _d) of λ-CHT decreased from 12.2 to 5.9 L·kg⁻¹ for Red soil, and from 26.1 to 16.8 L·kg⁻¹ for Black soil, whereas the CPM adsorption coefficient in both soils decreased nearly by 100% (K _d decreased from 9.4 to 0.2 L·kg⁻¹ for Red soil and from 16.2 to 0.5 L·kg⁻¹ for Black soil). Discussion  Pys adsorption is a surface phenomenon which depends on the surface area and the organic matter content. Thus, the Black soil, having higher organic matter and greater surface area than that of the Red soil, show greater adsorption affinity to λ-CHT and CPM. In our study, the different adsorption affinity of the two Pys was obtained, which was probably attributed to differences with respect to their physical–chemical properties. Further comparison upon the two Pys was conducted. The point charges of halogen atoms in the λ-CHT and CPM were calculated, the differences of which probably lead to the fact that λ-CHT has a stronger binding capacity to soils than CPM. Also, FTIR spectra show that competitive adsorption occurs between CPM and Cu for the same adsorption sites, which is responsible for the obtained suppression of CPM adsorption affected by Cu. Conclusions  Lambda-cyhalothrin shows a significantly stronger adsorption than cypermethrin on both soils. This phenomenon may be due to several reasons: (1) λ-CHT has lower solubility and a higher octanol–water partition coefficient value than CPM; (2) λ-CHT consists of specific isomers, whereas CPM is mixtures of eight different isomers; (3) the chlorine and fluorine atoms in the λ-CHT have a negative point charge, whereas the chlorine atoms in the CPM have a positive point charge. As the soil Cu concentrations increased from 19 (or 18) mg·kg⁻¹ to 1,600 mg·kg⁻¹, the adsorption coefficient of λ-CHT and CPM decreased on both soils. This is mainly due to a competition between Cu and Pys for occupying the adsorption sites on soils. The information from this study have important implications for vineyard and orchard soils, which often contain elevated levels of Cu and Pys. These results are also useful in assessing the environmental fate and health effect of λ-CHT and CPM. Recommendations and perspectives  It is important for environmental scientists and engineers to get a better understanding of soil–metal–organic contaminant interactions. However, pesticide adsorption involves complex processes, and shortcomings in understanding them still restrict the ability to predict the fate and behavior of pesticide. Therefore, considerable research should be carried out to understand the mechanism of interaction between Pys and heavy metal on soils clearly.     

Modelling the long-term consequences of a hypothetical dispersal of radioactivity in an urban area including remediation alternatives

The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes the second of two modelling exercises. This exercise was based on a hypothetical dispersal of radioactivity in an urban area from a radiological dispersal device, with reference surface contamination at selected sites used as the primary input information. Modelling endpoints for the exercise included radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a “no action” situation (with no remedial measures) and for selected countermeasures. The exercise provided an opportunity for comparison of three modelling approaches, as well as a comparison of the predicted effectiveness of various countermeasures in terms of their short-term and long-term effects on predicted doses to humans.     

再生水中内分泌干扰物质的存在及处理现状

随着污水回用大力开展,人们与再生水的接触机会增加,必须保障再生水的水质安全.资料调研发现,作为再生水水源的污水处理厂出水中含有多种内分泌干扰物质,活性炭吸附、超滤、高级氧化技术及膜技术可有效去除再生水中的内分泌干扰物质,但鉴于经济和管理上的困难,目前仍不能全面推广.中国常用的澄清(混凝沉淀)/过滤工艺不能有效去除污水处理厂二级出水中的内分泌十扰物质,这对接触人群的健康产生潜在威胁,对生物种群也有一定的影响.生物处理方法未来有可能成为去除内分泌干扰物质很有前途的方法.     

Fenton组合工艺处理焦化厂生化出水的应用研究

比较了Fenton氧化、Fenton氧化+活性炭及Fenton氧化+生物活性炭工艺对焦化厂生化出水的处理效果.结果表明,Fe2+、H2O2的投加量分别为56、27.2 mg/L时,Fenton氧化工艺对水样的UV254、颜色度(VIS380)、COD和总氰均有较好的去除效果;Fenton氧化+活性炭工艺在有效去除UV254、VIS380、COD和总氰的同时,能强化活性炭的吸附效果,并能显著提高水样的生化性能;Fenton氧化+生物活性炭工艺能有效去除UVM254,VIS380、COD与总氰,使出水达到<污水综合排放标准>(GB 8978-1996)一级标准.     

Emissions of gas- and particle-phase polycyclic aromatic hydrocarbons (PAHs) in the Shing Mun Tunnel,Hong Kong

Real-world vehicle emission factors for seventeen gas and particulate polycyclic aromatic hydrocarbons (PAHs) were quantified in the Shing Mun Tunnel, Hong Kong during summer and winter 2003. Naphthalene, acenaphthylene, and acenaphthene were the most abundant gas PAHs while fluoranthene and pyrene were the most abundant in the particle phase. Most (98%) of the gas PAHs consisted of two- and three-aromatic rings whereas most of the particle-phase PAHs were in four- (～60%) and five-ring (～17%) for fresh exhaust emissions. Average emission factors for the gas- and particle PAHs were 950–2564 μg veh^?1 km^?1 and 22–354 μg veh^?1 km^?1, respectively. Good correlations were found between diesel markers (fluoranthene and pyrene; 0.85) and gasoline markers (benzo[ghi]perylene and indeno[1,2,3-cd]pyrene; 0.96). Higher PAH emission factors were associated with a higher fraction of diesel-fueled vehicles (DV) passing through the tunnel. Separate emission factors were determined from diesel and non-diesel exhaust by the regression intercept method. The average PAH emission factor (i.e., sum of gas and particle phases) from DV (3085 ± 1058 μg veh^?1 km^?1) was ～5 times higher than that from non-diesel-fueled vehicles (NDV, 566 ± 428 μg veh^?1 km^?1). Ratios of DV to NDV emission factors were high for diesel markers (>24); and low for gasoline markers (<0.4).     

不同流向BAF硝化影响因素的对比试验

在温度、水力负荷、气水比、氨氮负荷、有机物负荷等硝化影响因素同等变化的情况下,进行了不同流向单级陶粒BAF硝化效果的对比试验研究。结果表明,UBAF的硝化效果和稳定性优于DBAF。若在同一反应器中同时去除有机物和氨氮,UBAF的经济气水比为3∶1～6∶1,DBAF的经济气水比为3∶1～5∶1。当进水有机物负荷<11 kg/(m³·d),有机物和氨氮的负荷比<5时,UBAF和DBAF的氨氮去除率相差不大。在较高COD浓度下,硝化菌在DBAF中与异氧菌的竞争能力不如UBAF。两级BAF的第一级宜为UBAF,但DBAF可能更适于作为二级滤池以提高系统稳定性、反硝化效率以及出水水质。     

旋风除尘器内部流场的数值研究

通过建立旋风除尘器模型,模拟了排气管插入深度对旋风除尘器的压降、气流的切向速度和轴向速度的影响。研究表明,增加排气管的插入深度会增大旋风除尘器的压力损失,但对其内部压力分布的影响却比较小;增加排气管的插入深度对气体切向速度和轴向速度的影响也比较小,在不同高度上,内外旋流交界处切向速度的最大值都有所增加,这会产生更大的离心力,除尘效率也会因此而提高。