In vitro biological effects of airborne PM₂.₅ and PM₁₀ from a semi-desert city on the Mexico-US border

Compelling evidence indicates that exposure to urban airborne particulate matter (PM) affects health. However, how PM components interact with PM-size to cause adverse health effects needs elucidation, especially when considering soil and anthropogenic sources. We studied PM from Mexicali, Mexico, where soil particles contribute importantly to air pollution, expecting to differentiate in vitro effects related to PM-size and composition. PM samples with mean aerodynamic diameters ≤2.5μm (PM(2.5)) and ≤10μm (PM(10)) were collected in Mexicali (October 2005-March 2006) from a semi-urban (expected larger participation of soil sources) and an urban (predominately combustion sources) site. Samples were pooled by site and size, analyzed for elemental composition (particle-induced X-ray emission) and tested in vitro for: induction of human erythrocytes membrane disruption (hemolysis) (colorimetrically); inhibition of cell proliferation (ICP) (crystal violet) and TNFα/IL-6 secretion (ELISA) using J774.A1 murine monocytic cells; and DNA degradation using Balb/c3T3 cell naked DNA (electrophoretically). Results of PM elemental composition principal component analysis were used in associating cellular effects. Sixteen elements identified in PM grouped in two principal components: Component(1) (C(1)): Mg, Al, Si, P, Cl, K, Ca, Ti, V, Cr, Fe, and Component(2) (C(2)): Cu, Zn. Hemolysis was predominately induced by semi-urban-PM(10) (p<0.05) and was associated with urban-PM(10)C(1) (r=0.62, p=0.003). Major ICP resulted with semi-urban PM(2.5) (p<0.05). TNFα was mainly induced by urban samples regardless of size (p<0.05) and associated with urban-PM(2.5)C(2) (r=0.48, p=0.02). Both PM(10) samples induced highest DNA degradation (p<0.05), regardless of location. We conclude that PM-size and PM-related soil or anthropogenic elements trigger specific biological-response patterns.     

Quantification of present and past biomass productivity as a support to effective biomass management

We used statistical data including specific calculations to show how the productivity of different biomass categories varies with land use, environmental conditions and land management at national and local level in Slovakia. Three different study sites were selected. Averaged annual productivity of the total biomass from one hectare ranged from 5.96 to 12.03 t on arable land, from 4.02 to 15.20 t on grasslands and from 11.72 to 13.56 t on forest land. Although the biomass productivity varied among the various biomass categories and the study sites, the average annual values of the total biomass per hectare from productive land was about the same at all three study sites (11.62, 11.68, 11.78 t/ha). Detailed quantification of different biomass categories offered a variety of possibilities to use them for further applications in economy and ecosystem services. At the national level, the unused biomass could have produced 29.8 PJ (petajoule) of heat energy.     

Extension of coupled multispecies metal transport and speciation (TRANSPEC) model to soil

Atmospheric deposition of metals emitted from mining operations has raised metal concentrations in the surrounding soils. This repository may be remobilized and act as a source of metals to nearby surface aquatic systems. It is important to understand metal dynamics and the impact of various chemistry and fate parameters on metal movement in the soil environment in order to evaluate risk associated with metals in terrestrial ecosystems and accurately establish critical discharge limits that are protective of aquatic biota. Here we extend our previously developed coupled multispecies metal fate-TRANsport and SPECiation/complexation (TRANSPEC) model, which was applicable to surface aquatic systems. The extended TRANSPEC, termed TRANSPEC-II, estimates the partition coefficient, K(d), between the soil-solid and -soluble phases using site-specific data and a semi-empirical regression model obtained from literature. A geochemical model calculates metal and species fractions in the dissolved and colloidal phases of the soil solution. The multispecies fugacity/aquivalence based fate-transport model then estimates inter-media transport rates such as leaching from soil, soil runoff, and water-sediment exchanges of each metal species. The model is illustratively applied to Ni in the Kelly Lake watershed (Sudbury, Ontario, Canada), where several mining operations are located. The model results suggest that the current atmospheric fallout supplies only 4% of Ni removed from soil through soil runoff and leaching. Soil runoff contributes about 20% of Ni entering into Kelly Lake with the rest coming from other sources. Leaching to groundwater, apart from runoff, is also a major loss process for Ni in the soil. A sensitivity analysis indicates that raising soil pH to above 6 may substantially reduce metal runoff and improve water quality of nearby water bodies that are impacted by runoff.     

On-site simultaneous determination of anions and cations in drainage water using a flow injection-capillary electrophoresis system with contactless conductivity detection

Drainage water diverted from a farm pasture, which was heavily loaded with manure, was monitored during a rain event. Concurrent anion and cation determinations at intervals of 10 min could be achieved with a new capillary electrophoresis system employing dual injection at opposite ends of the separation capillary. The flow injection approach enabled automation of the sampling process. Interruption of the separation voltage was not necessary. Contactless conductivity detection with an electrolyte solution optimized for the purpose allowed the facile simultaneous detection of the inorganic ions Cl(-), NO(3)(-), SO(4)(2-), HPO(4)(2-), NO(2)(-), NH(4)(+), K(+), Ca(2+), Na(+) and Mg(2+) and the acquisition of temporal concentration profiles of these species. The detection limits achieved were between 20 and 200 [micro sign]g l(-1) for all ions and the repeatability of peak areas and peak heights was better than 1%. The quantitative results were verified by analysing individual samples later in the laboratory with photometry and ion chromatography and the average deviations were found to be between 4 and 12%. This contribution presents a further step in the development of capillary electrophoresis towards a fully automated, low maintenance field method.     

Endosulfan acute toxicity and histomorphological alterations in Jenynsia multidentata (Anablepidae,Cyprinodontiformes)

Toxicity tests using adult specimens of Jenynsia multidentata were carried out during 96 hours in order to determine the lethal concentration (LC50) of endosulfan. Histological alterations were determined in gills and liver. Gill damage was quantified as secondary lamellae thickness. The 96 hr LC50 values were significantly different between males (0.719 μ g.L^{? 1}) and females (1.317 μg.L^{? 1}). The sex difference was attributed to the dimorphism in the lipid content in females (2.16%) and males (1.79%). Histological alterations in gills included hypertrophy and lifting of the epithelium of the secondary lamellae and aneurisms. These alterations caused a significant increase of the secondary lamellae thickness in treatment versus control fish. Finally, reversible histological alterations (such as hydropic degeneration and dilation of sinusoids) were observed in the liver of exposed fish as well as an irreversible change such as necrosis at the highest concentrations.     

Derivation of new emission factors for quantification of mass emissions when using optical gas imaging for detecting leaks

This paper describes the development of new "leak/no-leak" emission factors that are suitable for estimating facilities' fugitive emissions when using an alternative work practice (AWP) that is based on optical gas imaging technology for detecting leaking piping system components. These emission factors were derived for valves, pumps, and connectors/flanges for instrument leak detection thresholds ranging from 3 to 60 g/hr using a combination of field data and Monte Carlo statistical simulation techniques. These newly derived leak/no-leak emission factors are designed to replace the U.S. Environment Protection Agency (EPA) 1995 Protocol factors, which were based on Method 21 monitoring of leaks at "uncontrolled" facilities. The emission factors published in the 1995 Protocol have not been updated since the 1970s. This derivation is based on results where the authors document the use of a Monte Carlo simulation technique to quantify the required leak detection thresholds that provide equal--or better--environmental benefits for an AWP. The use of these newly derived emission factors is demonstrated for different methods of computing fugitive emissions from a hypothetical model refinery. The resulting facility emissions calculated by using these new emission factors is compared with the existing emission estimation methods provided in the EPA 1995 Protocol. The results demonstrate that the new emission factors provide an emission estimate that is the closest to that obtained from the direct determination of total emissions by Monte Carlo simulations.     

Modification of light utilization for skeletal growth by water flow in the scleractinian coral <Emphasis Type="Italic">Galaxea fascicularis</Emphasis>

In this study, we tested the hypothesis that the importance of water flow for skeletal growth (rate) becomes higher with increasing irradiance levels (i.e. a synergistic effect) and that such effect is mediated by a water flow modulated effect on net photosynthesis. Four series of nine nubbins of G. fascicularis were grown at either high (600 μE m⁻² s⁻¹) or intermediate (300 μE m⁻² s⁻¹) irradiance in combination with either high (15–25 cm s⁻¹) or low (5–10 cm s⁻¹) flow. Growth was measured as buoyant weight and surface area. Photosynthetic rates were measured at each coral’s specific experimental irradiance and flow speed. Additionally, the instantaneous effect of water flow on net photosynthetic rate was determined in short-term incubations in a respirometric flowcell. A significant interaction was found between irradiance and water flow for the increase in buoyant weight, the increase in surface area, and specific skeletal growth rate, indicating that flow velocity becomes more important for coral growth with increasing irradiance levels. Enhancement of coral growth with increasing water flow can be explained by increased net photosynthetic rates. Additionally, the need for costly photo-protective mechanisms at low flow regimes could explain the differences in growth with flow.     

Prenatal testing for Imprinting Disorders: A clinical perspective

Imprinting Disorders (ImpDis) are a group of congenital conditions caused by aberrant imprinting resulting in disturbed expression of parentally imprinted genes. ImpDis are rarely associated with major malformations, but pre- and/or postnatal growth and nutrition are often affected. In some ImpDis, behavioral, developmental, metabolic and neurological symptoms might present in the perinatal context or later in life, and in single ImpDis, there is a higher risk of tumors in childhood. Prognosis depends in part on the molecular cause of each ImpDis, but due to high clinical variability and (epi)genetic mosaicism, predicting the clinical outcome of a pregnancy solely based on the underlying molecular disturbance is difficult. Therefore, interdisciplinary care and treatment approaches play an important role in the management and decision making of affected pregnancies, especially taking into account fetal imaging in addition to genetic findings. Prenatal findings influence perinatal management, and thereby improve the prognosis of ImpDis associated with severe but sometimes transient clinical complications in the neonatal period. Therefore, prenatal diagnosis can be crucial for appropriate management not only to the pregnancy itself but might also have a life-long effect.