Benefits of protected areas for nonbreeding waterbirds adjusting their distributions under climate warming

Climate warming is driving changes in species distributions and community composition. Many species have a so-called climatic debt, that is, shifts in range lag behind shifts in temperature isoclines. Inside protected areas (PAs), community changes in response to climate warming can be facilitated by greater colonization rates by warm-dwelling species, but also mitigated by lowering extirpation rates of cold-dwelling species. An evaluation of the relative importance of colonization-extirpation processes is important to inform conservation strategies that aim for both climate debt reduction and species conservation. We assessed the colonization-extirpation dynamics involved in community changes in response to climate inside and outside PAs. To do so, we used 25 years of occurrence data of nonbreeding waterbirds in the western Palearctic (97 species, 7071 sites, 39 countries, 1993–2017). We used a community temperature index (CTI) framework based on species thermal affinities to investigate species turnover induced by temperature increase. We determined whether thermal community adjustment was associated with colonization by warm-dwelling species or extirpation of cold-dwelling species by modeling change in standard deviation of the CTI (CTI_SD). Using linear mixed-effects models, we investigated whether communities in PAs had lower climatic debt and different patterns of community change than communities outside PAs. For CTI and CTI_SD combined, communities inside PAs had more species, higher colonization, lower extirpation, and lower climatic debt (16%) than communities outside PAs. Thus, our results suggest that PAs facilitate 2 independent processes that shape community dynamics and maintain biodiversity. The community adjustment was, however, not sufficiently fast to keep pace with the large temperature increases in the central and northeastern western Palearctic. Our results underline the potential of combining CTI and CTI_SD metrics to improve understanding of the colonization-extirpation patterns driven by climate warming.     

Method development for determination of fluroxypyr in water

Improved methods for extraction and clean up of fluroxypyr residue in water have been established. Two methods of fluroxypyr extraction were used, namely, Direct Measurement of fluroxypyr and Concentration of fluroxypyr onto A Solid Phase Extraction (SPE) Adsorbent, followed by elution with solvent before determination of fluroxypyr. The recovery for Direct Measurement of fluroxypyr in water containing 8-100 microg L(-1), ranged from 86 to 110% with relative standard deviation of 0.7 to 2.15%. For the second method, three types of SPE were used, viz. C18, C18 end-capped and polyvinyl dibenzene (ISOLUTE ENV+). The procedure involved concentrating the analyte from fluroxypyr-spiked water at pH 3, followed by elution of the analyte with 4 mL of acentonitrile. The recovery of fluroxypyr from the spiked sample at 1 to 50 microg L(-1) after eluting through either C18 or C18 end-capped ranged from 40-64% (with relative standard deviation of 0.7 to 2.15) and 41-65% (with standard deviation of 1.52 to 11.9). The use of ISOLUTE ENV+, gave better results than the C18, C18 end-capped or the Direct Measurement Methods. The recovery and standard deviation of fluroxypyr from spiked water using ISOLUTE ENV+ ranged from 91-102% and 2.5 to 5.3, respectively.     

Removal and pre-concentration of phenolic species onto beta-cyclodextrin modified poly(hydroxyethylmethacrylate-ethyleneglycoldimethacrylate) microbeads

Poly(Hydroxyethylmethacrylate-Ethyleneglycoldimethacrylate), poly(HEMA-EGDMA), microbeads with 150-200 microm in size, was prepared by suspension polymerization. Beta-cyclodextrin was modified onto the polymeric microbeads using glutaraldahyde activation in an acidic medium at pH=2.5. FT-IR and TGA were used for the characterization of modified polymers and the determination of the nature of the interaction between phenolic compounds and the modified polymeric microbeads. Plain and beta-cyclodextrin modified microbeads were used in adsorption-desorption studies of phenolic species in single solution. Adsorption capacities of the phenolic species onto the plain microbeads were found to be 28.2, 17.0, 14.3, 9.8, and 1.92 mg/g polymer for o-chloro phenol, p-nitro phenol, p-chloro phenol, o-nitro phenol, and phenol, respectively. However, for beta-cyclodextrin modified microbeads, adsorption capacity of phenolic species was determined as 274, 365, 128, 182, and 87 mg/g for phenol, o-nitro phenol, p-nitro phenol, o-chloro phenol, and p-chloro phenol, respectively. Desorption ratio for the phenolic species was more than 90%, except for o-nitro phenol. Detection limits of the phenolic species were improved at least 500-fold for UV-Vis spectrophotometric detection, after the pre-concentration of all phenolic species used in this study. Adsorption time for the phenolic species onto beta-cyclodextrin-modified poly(HEMA-EGDMA) microbeads was found to be reasonable short (10-60 min) and suitable for the applications. Also, synthesized microbeads were useful for the repeated use for the removal and pre-concentration of phenolic species.     

Systematic development of an artificial neural network model for real-time prediction of ground-level ozone in Edmonton, Alberta, Canada

Ground-level ozone is a secondary pollutant that has recently gained notoriety for its detrimental effects on human and vegetation health. In this paper, a systematic approach is applied to develop artificial neural network (ANN) models for ground-level ozone (O3) prediction in Edmonton, Alberta, Canada, using ambient monitoring data for input. The intent of these models is to provide regulatory agencies with a tool for addressing data gaps in ambient monitoring information and predicting O3 events. The models are used to determine the meteorological conditions and precursors that most affect O3 concentrations. O3 time-series effects and the efficacy of the systematic approach are also assessed. The developed models showed good predictive success, with coefficient of multiple determination values ranging from 0.75 to 0.94 for forecasts up to 2 hr in advance. The inputs most important for O3 prediction were temperature and concentrations of nitric oxide, total hydrocarbons, sulfur dioxide, and nitrogen dioxide.     

Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream

TiO2 thin film photocatalyst was successfully synthesized and immobilized on glass reactor tube using sol-gel method. The synthesized TiO2 coating was transparent, which enabled the penetration of ultra-violet (UV) light to the catalyst surface. Two photocatalytic reactors with different operating modes were tested: (a) tubular photocatalytic reactor with re-circulation mode and (b) batch photocatalytic reactor. A new proposed TiO2 synthesized film formulation of 1 titanium isopropoxide: 8 isopropanol: 3 acetyl acetone: 1.1 H2O: 0.05 acetic acid (in molar ratio) gave excellent photocatalytic activity for degradation of phenol and methylene blue dye present in the water. The half-life time, t1/2 of photocatalytic degradation of phenol was 56 min at the initial phenol concentration of 1000 microM in the batch reactor. In the tubular photocatalytic reactor, 5 re-circulation passes with residence time of 2.2 min (single pass) degraded 50% of 40-microM methylene blue dye. Initial phenol concentration, presence of hydrogen peroxide, presence of air bubbling and stirring speed as the process variables were studied in the batch reactor. Initial methylene blue concentration, pH value, light intensity and reaction temperature were studied as the process variables in the tubular reactor. The synthesized TiO2 thin film was characterized using SEM, XRD and EDX analysis. A comparative performance between the synthesized TiO2 thin film and commercial TiO2 particles (99% anatase) was evaluated under the same experimental conditions. The TiO2 film was equally active as the TiO2 powder catalyst.     

Halogen content relative to the chemical and biochemical composition of fifteen marine macro and micro algae: nutritional value,energy supply,antioxidant potency,and health risk assessment

Marine algae have made a strong contribution to global food security in the future. This study is the first report describing the concentration, pathways, and interactions of halogens in 15 species of marine algae collected from the Eastern Harbor in Alexandria, Egypt, relative to 22 key variables. The relationship between halogen content and chemical and biochemical parameters was studied through multivariate analysis. Among all the tested algae, the iodine content was the lowest (2.53–3.00 μg/g). The range of fluoride and chloride in macroalgae (1.12–1.70 and 0.10–0.46 mg/g) was smaller than that of microalgae (0.10–0.46 and 1.48–3.17 mg/g). The bromide content in macroalgae (0.36–5.45 mg/g) was higher than that in microalgae (0.40–0.76 mg/g). The halogen content in macroalgae was arranged in the order of Br > F > Cl > I. In addition, the biochemical parameters such as carbohydrates, proteins, lipids, and certain heavy metals (Fe, Zn, Cu, Mn, Pb, Ni, Co, Cd, and Cr) were determined. Calories, energy, total antioxidant activity (TAC), K/Na, and ion quotient amounts were estimated. The results showed that the green seaweed species had the highest TAC content. In most of the studied algal species, the calculated ion quotient referred to their likelihood of overcoming high blood pressure. The estimated daily intake (EDI) of algae showed no adverse effects on human health. Most of the research variables are below the acceptable WHO/FAO level. Generally, the calorie content of the selected algae is less than 2 kcal, which makes the algae considered an alternative source of healthy food to reduce obesity.

Graphical abstract

     

Bioremediation of HCH-contaminated soil: elimination of inhibitory effects of the insecticide on radish and green gram seed germination

The effects of technical grade hexachlorocyclohexane (tech-HCH) on the germination of different seeds were tested. Two types of seeds, radish and green gram showed marked reduction in germination percentage and seeding vigour index. The abnormalities and reduction in germination increased with increasing concentration of tech-HCH. At 100 microg HCH level the germination of radish and green gram seeds was inhibited almost completely on moist filter paper and soil. Protease and amylase activities were reduced in seeds grown in soil spiked with tech-HCH. Bioremediation of HCH-spiked soils with a HCH-degrading microbial consortium helped in eliminating the toxic effects of tech-HCH towards seed germination. The degradation of 25 microg tech-HCH g(-1) soil was complete by 120 h. The seed germination and the activities of the assayed enzymes, amylase and protease, were same as before or better in bioremediated soils.     

Detection of organic pollutants in sandy soils via TDR and eigendecomposition

In this study, organic pollutants in sandy soils are detected using a time domain relectrometry (TDR) probe system and eigendecomposition technique. As a demonstration, four types of organic fluids (motor oil, diesel oil, methanol and ethanol) were examined. Samples were prepared with different combinations of deionized water and organic fluid contents. For each experiment, reflected signals were captured by an oscilloscope, and their characteristics were identified using eigendecomposition technique. Autoregressive modeling and singular value decomposition methods were utilized for calculating the eigenvalues. The most significant eigenvalues were then identified based on their relative magnitude. Experimental results indicated that the presented system is sensitive to both water and pore fluid organic contents. For saturated conditions, signature curves were determined for identification of organic and/or water contents in soil pore fluids.     

Economic assessment of the negative impacts of ozone on crop yields and forest production. A case study of the estate Ostads Säteri in southwestern Sweden

Ground level ozone concentrations, in combination with the prevailing climate, at the estate Ostads S?teri in southwestern Sweden were estimated to reduce the yield of wheat and potato ranging between 5% and 10%. Occasionally, in years with the highest ozone concentrations and/or climatic conditions favoring high rates of ozone uptake to the leaves, yield loss levels above 10% may occur. Based on simple extrapolation, these ozone-induced reductions of crop yields at Ostads S?teri represent a potential total annual yield loss in Sweden in the range of 24.5 million Euro for wheat and 7.3 million Euro for potato, respectively. A simulation of forest growth at Ostad S?teri predicted that prevailing mean ozone exposure during 1993-2003 had the potential to reduce forest growth by 2.2% and the economic return of forest production by 2.6%. Using this value for extrapolation to the national level, the potential annual economic loss for Sweden due to negative impacts of ozone on forest production would be in the range of 56 million Euro (2004 prices).     

Phosphorus fate and transport in soil columns loaded intermittently with influent of high phosphorus concentrations.

In this study, several columns of different lengths were filled with composite soils sampled from the field at corresponding depths and then loaded intermittently with influent of a high phosphorus concentration to evaluate phosphorus fate and transport in soil. The results indicate that the height of the mass transfer zone, solvent pore velocity, and soil's life expectancy for phosphorus removal increased with depth, while the retained phosphorus per kilogram of soil and the linear adsorption equilibrium coefficient, R, decreased with depth. An equation was developed to link liquid-phase phosphorus with solvent traveling time and soil depth. The results of X-ray diffraction and washout tests indicate that calcium-phosphorus precipitation and/or crystal growth occurred in the columns. The new protocol is useful for evaluation of phosphorus fate and transport in other subsurface systems, because it allows flexible adjustments in hydraulic loadings, feed solution, and sampling schemes.