Physicochemical properties associated with the presence of <Emphasis Type="Italic">Burkholderia pseudomallei</Emphasis> in small ruminant farm water supplies in Peninsular Malaysia

Burkholderia pseudomallei causes melioidosis, a life-threatening infection in both humans and animals. Water is an important reservoir of the bacteria and may serve as a source of environmental contamination leading to infection. B. pseudomallei has an unusual ability to survive in water for a long period. This paper investigates physicochemical properties of water associated with the presence of B. pseudomallei in water supply in small ruminant farms in Peninsular Malaysia. Physicochemical properties of water samples taken from small ruminant farms that included temperature, pH, dissolved oxygen (DO₂), optical density (OD), and chemical oxygen demand (COD) were measured after which the samples were cultured for B. pseudomallei. Multivariable logistic regression model revealed that slightly acidic water pH and higher COD level were significantly associated with the likelihood of the B. pseudomallei presence in the water.     

Thermal barrier coated diesel engine running on biodiesel: a review

Thermal barrier coated diesel engine, also known as low heat rejection (LHR) engine have offered the promise of reducing heat rejection to the engine coolant and increase the combustion temperature which results in increase of thermal efficiency, decrease of fuel consumption and emission rate of the engine. Biodiesel derived from the vegetable oils are a promising alternative fuel for diesel fuel. The viscosity of vegetable oil after transestrification is still higher than that of diesel fuel. The various researchers have reported that the energy of the biodiesel could be released more efficiently with the concept of LHR engine. In the case of LHR engine running on different biodiesel blends, almost all experimental studies has predicted improved performance. This paper analyses and discussed the operating conditions under which the experimental studies are carried out and the factors which affect thermal efficiency and exhaust emissions in LHR engine.     

Numerical simulation on pollutant dispersion from vehicle exhaust in street configurations

The impact of the street configurations on pollutants dispersion from vehicles exhausts within urban canyons was numerically investigated using a computational fluid dynamics (CFD) model. Three-dimensional flow and dispersion of gaseous pollutants were modeled using standard kappa - epsilon turbulence model, which was numerically solved based on Reynolds-averaged Navier-Stokes equations by the commercial CFD code FLUENT. The concentration fields in the urban canyons were examined in three cases of street configurations: (1) a regular-shaped intersection, (2) a T-shaped intersection and (3) a Skew-shaped crossing intersection. Vehicle emissions were simulated as double line sources along the street. The numerical model was validated against wind tunnel results in order to optimize the turbulence model. Numerical predictions agreed reasonably well with wind tunnel results. The results obtained indicate that the mean horizontal velocity was very small in the center near the lower region of street canyon. The lowest turbulent kinetic energy was found at the separation and reattachment points associated with the corner of the down part of the upwind and downwind buildings in the street canyon. The pollutant concentration at the upwind side in the regular-shaped street intersection was higher than that in the T-shaped and Skew-shaped street intersections. Moreover, the results reveal that the street intersections are important factors to predict the flow patterns and pollutant dispersion in street canyon.     

Determination of selected heavy metals in air samples from the northern part of Jordan

In this work, the atmospheric concentrations of selected heavy metals including lead (Pb), iron (Fe), cadmium (Cd), copper (Cu), nickel (Ni), manganese (Mn), and zinc (Zn) were measured for two different sampling sites (urban and rural) in the northern part of Jordan (Irbid city). Samples were collected according to a certain schedule for 1 year. High volume air samplers and glass fiber filters were used to collect the samples. Collected samples were digested using a mixture of analytical grade nitric acid and analytical grade hydrochloric acid, and analyzed to evaluate the levels of heavy metals by atomic absorption spectrophotometry. Six heavy metals (Pb, Fe, Cu, Ni, Mn, and Zn) were measured in all samples; the concentrations of Cd and Co were not detected in Irbid atmosphere by atomic absorption spectroscopy. The results were used to determine the levels of heavy metal pollutants in air, possible sources, and to compare the levels of selected heavy metals in the two studied sites. Aerosols from the rural site have lower concentrations for all the metals compared to those from the urban site. The daily and monthly variations of the elements were investigated. All heavy metals in urban and rural sites reached maximum concentrations in June, July, and August. This is consistent with the increased activities leading to particulate matter emission during the summer period. The enrichment factors with respect to earth crust and correlation coefficients of heavy metals were investigated to predict the possible sources of heavy metals in air.     

Silica glass modified with flavonoid derivatives for preconcentration of some toxic metal ions in water samples and their determination with ICP-MS

Quercetin (3,3^′,4^′,5,7-pentahydroxyflavone) chemically bonded through pyran rearrangement on modified controlled pore silica glass (QCPSG) with a capacity 0.213 mmol/g was used for solid phase extraction of some toxic metal and metalloid ions. The newly designed QCPSG quantitatively sorbs As(V), Cd(II), Hg(II), and Pb(II) at the pH range 7.5–8.5 after 10 min of stirring. HCl (1 mol L^???1) instantaneously elutes all the metal ions. The sorption capacity of the ion collector is 0.42, 0.46, 0.53, and 0.49 mmol g^???1 for As(V), Cd(II), Hg(II), and Pb(II), respectively, whereas the preconcentration factor is 200. The effect of NaCl, Na₂SO₄, NaF, NaBr, Na₃PO₄, and other interfering salts on the sorption of metal ions (50 μg L^???1) was reported. Analytical detection limits of As(V), Cd(II), Hg(II), and Pb(II) were 4.18, 2.44, 15.86, and 25.00 pg mL^???1, respectively. QCPSG was used in the separation of the investigated metal ions from some natural water samples collected from diverse origins followed by determination by inductively coupled plasma–mass spectrometry. The data were compared with those obtained by the standard methods of determination using atomic absorption (hydride generation, HGAAS and after solvent extraction with ammonium pyrolidine dithiocarbamate/methyl isobutyl ketone). The suggested solid phase extraction method was found accurate with no random error.     

Multimarker approach analysis in common carp Cyprinus carpio sampled from three freshwater sites

The aim of this study is to assess the response of a multimarker approach in common carp Cyprinus carpio sampled from three Tunisian dam lakes selected according to different environmental and ecological characteristics. Glutathione-S-transferase (GST) activity was analyzed in carp liver and used as a phase II detoxification enzyme, hepatic metallothionein content (MTs) was used as a metallic stress indicator, and cholinesterase activities were analyzed in muscle and brain and used as neurotoxicity biomarker. Micronucleus frequency test (MN) as a genotoxicity marker. GST and MT levels showed an increase in fish from the Bir Mcherga site and a decrease in Sidi Saâd site with respect to fish from Nebhana site. Results showed a strong inhibition of cholinesterase activities in fish from Bir Mcherga and Sidi Saâd sites compared to Nebhana site. Relatively high level of MN is reported specially in fish blood from the Bir Mcherga site.     

An assessment of selected trace elements in intertidal surface sediments collected from the Peninsular Malaysia

Concentrations of 11 trace elements (V, Cr, Co, Ni, Cu, Zn, As, Ag, Cd, Pb, and U) were determined in the intertidal surface sediments of Peninsular Malaysia. The average trace element concentrations are ranked as follows: Zn>V>As>Cr>Pb>Cu>Ni>Co>U>g>Cd. Interim Sediment Quality Guidelines (ISQGs) employed in present study are the Australia and New Zealand joint guideline (ANZECC/ARMCANZ), and the Hong Kong authorities. From the pooled data, none of these trace elements have the average concentration above the ISQG-high values. However, As and Ag average concentrations were over the ISQG-low values. Some elements were found to have the average concentration above the ISQG-high and/or ISQG-low in certain locations, including Kampung Pasir Putih (JPP), Lumut Port (ALP), Kuala Perai (PKP), Port Dickson (NPD), and others. The lowest and highest concentrations in a specific sampling location and maritime area varied among the elements, variations that were greatly affected by natural and anthropogenic activities in a given area. For each trace element, there were various levels of concentration among the sampling locations and maritime areas. These patterns indicated pollutant sources of an element for each area perhaps derived from nearby areas and did not widely distributed to other locations. It is necessary for Malaysia to develop an ISQG for effective quick screening and evaluation of the coastal environment of Peninsular Malaysia.     

Novel materials for environmental remediation of tailing pond waters containing naphthenic acids

A nanofiltration strategy for tailing pond waters (TPWs) that utilizes cyclodextrin (CD)-based polymeric materials as supramolecular sorbents is proposed. Naphthenic acids (NAs) from the Athabasca TPWs are investigated as the target sorbate molecules.The sorption properties of several supramolecular porous materials were characterized using equilibrium sorption isotherms in aqueous solution wherein electrospray ionization mass spectrometry was used to monitor the concentration of NAs in aqueous solution. The characterization of the supramolecular sorbents was performed using ¹³C NMR and IR spectroscopy, while nitrogen porosimetry was used to estimate their surface area and pore structure properties. Independent estimates of surface area were obtained using a chromophore dye adsorption method in aqueous solution.The sorption results for NAs in solution were compared between a commercially available standard; granular activated carbon (GAC) and three types of synthetic materials. The sorption capacities for GAC ranged from 100 to 160 mg NAs/g of material whereas the polymeric materials ranged from 20 to 30 mg NAs/g of material over the experimental conditions investigated. In general, differences in the sorption properties between GAC and the CD-based sorbents were observed and related to differences in the surface areas of the materials and the chemical nature of the sorbents. The CD-based supramolecular materials displayed sorption capacities ranging from 36.2 to 657 m²/g as compared to that for GAC (795 m²/g).