The potential effect of temperature-humidity index on productive and reproductive performance of buffaloes with different genotypes under hot conditions

The current study was aimed to investigate the impact of THI on productive and reproductive indices of PE and F₁ crosses (50% PE and 50% Italian buffaloes) and back crosses (BC) (75% PE and 25% Italian buffaloes) under hot conditions. In this study, 8385 records used PE (1914, 1518, and 1737), F₁ (387, 447, and 657), and BC (495, 585, and 645) for low, medium, and high THI, respectively. The high THI reduced the conception rate after first insemination in PE, F₁, and BC ((odds ratio, OR) = 1.187, P = 0.007; 2.361, <0.0001 and 1.603, <0.0001, respectively) when compared with low THI. But, stillbirth and calving condition were not significantly influenced by different THI levels in BC and F₁. BC was more bearable to the harsh environment; they possessed the highest incidence of conception after first insemination (72.70, 72.60, and 62.40%), producing live calves (98.50, 100, and 99.40%) with easy calving condition (98.50, 100, and 99.40%) when compared to PE and F₁ at different levels of THI, respectively. The average daily milk yield and peak of milk production were decreased in PE (4.02 and 5.12%), BC (13.33 and 10.95%), and F₁ (25.29 and 12.20%) from low to high THI. However, BC revealed no significant changes in days open, dry period, calving interval, gestation length, service per conception, and the first service post-partum at different levels of THI when compared with PE and F₁. Therefore, rearing BC is recommended for improving buffalo productive and reproductive performance under hot conditions.     

Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization

Environmental Science and Pollution Research - Hospital wastewaters contain large amounts of pharmaceutical residues, which may eventually be discharged into the aquatic environment through...     

Applying the three R’s: Reduce,reuse, and recycle in the chemical industry

Pollution prevention (P2) assessment was conducted by applying the three R’s, reduce, reuse, and recycle, in a chemical industry for the purpose of reducing the amount of wastewater generated, reusing paint wastewater in the manufacture of cement bricks, recycling cooling water, and improving water usage efficiency. The results of this study showed that the annual wastewater flow generated from the paint manufacturing can be reduced from 1,100 m³ to 488.4 m³ (44.4% reduction) when a high-pressure hose is used. Two mixtures were prepared. The first mixture (A) contains cement, coarse aggregate, fine aggregate, Addicrete BVF, and clean water. The second mixture (B) contains the same components used in the first mixture, except that paint wastewater was used instead of the clean water. The prepared samples were tested for water absorption, toxicity, reactivity, compressive strength, ignitability, and corrosion. The tests results indicated that using paint wastewater in the manufacture of the cement bricks improved the mechanical properties of the bricks. The toxicity test results showed that the metals concentration in the bricks did not exceed the U.S. EPA limits. This company achieved the goal of zero liquid discharge (ZLD), especially after recycling 2,800 m³ of cooling water. The total annual saving could reach $42,570 with a payback period of 41 days.

Implications: This research focused on improving the water usage efficiency, reducing the quantity of wastewater generated, and potentially reusing wastewater in the manufacture of cement bricks. Reusing paint wastewater in the manufacture of the bricks prevents the hazardous pollutants in the wastewater (calcium carbonate, styrene acrylic resins, colored pigments, and titanium dioxide) from entering and polluting the surface water and the environment. We think that this paper will help to find the most efficient and cost-effective way to manage paint wastewater and conserve fresh water resources. We also believe that this paper provides a rich agenda for future research in water conservation and industrial wastewater reuse subjects.     

Adaptation planning for sea level rise: a study of US coastal cities

Sea level rise (SLR) is expected, even without greenhouse gas emissions. As SLR is inevitable, adapting to its impacts has received increasing attention, and local governments are the key actors in this emerging agenda. This study indicates that adaptation planning for SLR should be integrated into two local major planning mechanisms in the United States: the local comprehensive plans and hazard mitigation plans. By evaluating 36 plans from 15 US coastal cities that are considered at high risk and vulnerable to rising sea levels, the results demonstrate that SLR is widely identified, but the overall quality of the plans to address it requires significant improvement. A detailed table of selected plans' characteristics is also provided as a lens on how localities tackle this challenging issue. The paper concludes with planning suggestions for coastal communities to better adapt to SLR.     

Reuse paint wastewater in the manufacture of cement bricks and tiles

Journal of Material Cycles and Waste Management - Waste management is one of the most important and serious issues facing many developing countries. The main purpose of this research involves...     

New Methods for the Preparation Nanosized Metal Coordination Polymers

Transition-metal coordination polymers [M(ndc)(bpy)·(H₂O)m]·xH₂O (where M = Co(II), Ni(II), Cu(II) and Zn(II), ndc = 1,4-naphthalenedicarboxylate, bpy = 4,4′-bipyridine; m = 0 or 1; x = 1 or 2) were prepared by reacting the ligands and metal ions at room temperature with the aid of microwave irradiation and sonication methods. The structure of the coordination polymers was assigned based on elemental analysis, FT-IR and electronic spectral studies, thermal analysis, scanning electron microscope and X-ray powder diffraction. Thermogravimetric analysis was also used to follow up the possible thermal decomposition steps and to calculate the thermodynamic parameters of the nano-sized metal complexes. The kinetic parameters were calculated making use of the Coats–Redfern and Horowitz–Metzger equations. All obtained results of the different technics used in our study stated the ability to synthesis the metal coordination polymers of our interest using both microwave irradiation and sonication methods.     

Neurotoxicity and oxidative stress induced by permethrin in gills of the freshwater mussel Unio ravoisieri

Pyrethroids are contaminants found in the aquatic environment, and their toxicological effects on aquatic organisms have received extensive attention. However, the impact on freshwater bivalve of exposure to these chemicals is still largely unknown. Freshwater mussels Unio ravoisieri were exposed to two nominal permethrin (PM) concentrations C1?=?50?µg/L and C2?=?100?µg/L during 7 days. The measured concentrations of PM using gas chromatography (GC/ECD) in the treated aquariums were, respectively, 28.7–62.3?µg/L. Catalase (CAT), Glutathione-S-transferase (GST), and Acetylcholinesterase (AChE) activities, Glutatione (GSH) and Malondialdehyde (MDA) levels were determined in gills of U. ravoisieri. Significant increase in CAT activity by the lowest concentration and decrease by highest concentration were observed. Additionally, GST activity was increased in a concentration-dependent manner. However, statistically significant decrease in GSH levels (about 39%) was observed only at high concentration of this compound (100?µg/L). PM generated an increase in MDA levels reaching the highest value at the high concentration. AChE activity of mussel ranging from 51% inhibition at lowest concentration 50?µg/L to 89% inhibition at highest concentration 100?µg/L. The results indicated that oxidative stress and cell damage might be one of the main mechanisms of PM toxicity to freshwater mussels.     

DRAINMOD-FOREST: Integrated Modeling of Hydrology, Soil Carbon and Nitrogen Dynamics, and Plant Growth for Drained Forests

We present a hybrid and stand-level forest ecosystem model, DRAINMOD-FOREST, for simulating the hydrology, carbon (C) and nitrogen (N) dynamics, and tree growth for drained forest lands under common silvicultural practices. The model was developed by linking DRAINMOD, the hydrological model, and DRAINMOD-N II, the soil C and N dynamics model, to a forest growth model, which was adapted mainly from the 3-PG model. The forest growth model estimates net primary production, C allocation, and litterfall using physiology-based methods regulated by air temperature, water deficit, stand age, and soil N conditions. The performance of the newly developed DRAINMOD-FOREST model was evaluated using a long-term (21-yr) data set collected from an artificially drained loblolly pine ( L.) plantation in eastern North Carolina, USA. Results indicated that the DRAINMOD-FOREST accurately predicted annual, monthly, and daily drainage, as indicated by Nash-Sutcliffe coefficients of 0.93, 0.87, and 0.75, respectively. The model also predicted annual net primary productivity and dynamics of leaf area index reasonably well. Predicted temporal changes in the organic matter pool on the forest floor and in forest soil were reasonable compared to published literature. Both predicted annual and monthly nitrate export were in good agreement with field measurements, as indicated by Nash-Sutcliffe coefficients above 0.89 and 0.79 for annual and monthly predictions, respectively. This application of DRAINMOD-FOREST demonstrated its capability for predicting hydrology and C and N dynamics in drained forests under limited silvicultural practices.     

Environment and Mobility: A View from Four Discourses

Debate and literature on the link between degrading environments and human mobility has been increasing exponentially. There is little concrete evidence, however, of efforts or policies that support the management of environmentally influenced mobility. Through discourse analysis using Q-methodology, this research aimed to scrutinize the standoff between opposing views under a fresh lens. One-hundred and ninety-seven experts from 49 nations completed an on-line survey asking them to sort, by level of agreement, 42 statements gleaned from the literature concerning the environment-mobility nexus. Four very different discourses emerged: determined humanists, benevolent pragmatists, cynical protectionists, and critical realists. The complexity of these discourses helps explain the stalemate while confirming the inappropriateness of one-sided terminology and linear quantifications. Despite diametrically opposed viewpoints, experts unanimously agree that human mobility is connected to environmental change. Dissection of these social perspectives builds a new foundation for the Rio+20 analysis and policy deliberations related to environmentally influenced human mobility.     

Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

This article focused on the performance of oil palm kernel shell (PKS) gasification using a medium-scale downdraft gasifier with a feedstock capacity of 500 kg at a temperature range of 399–700°C and at a feed rate of 177 kg/h. This article is important for evaluating the reliability of PKS gasification for commercial power generation activities from biomass. The process performance was evaluated based on the syngas calorific value (CV), syngas flow rate, and its cold gas efficiency (CGE). The syngas flow rates and CVs were measured using a gas flow meter and a gas analyzer in real time. The data obtained were then analyzed to evaluate the performance of the process. The results showed that the CGE of the process was moderately high (51%) at 681°C, with a high syngas CV (4.45–4.89 MJ/Nm³) which was ideal for gas engine applications. The PKS gasification performance increased when the reactor temperature increased. Projections were made for the CGE and the syngas CV for the PKS gasification with increased reactor temperatures and it was found that these values could be increased up to 80% and 5.2 MJ/Nm^3, respectively at a reactor temperature of 900°C. In addition, the estimated power that could be generated was about 600 kW_e at a maximum operation of 500 kg/h of feed rate. Based on the analysis, a medium-scale PKS gasification is observed to be a promising process for power generation from biomass due to the favorable performance of the process.