Design of on-line river water quality monitoring systems using the entropy theory: a case study

The design of a water quality monitoring network is considered as the main component of water quality management including selection of the water quality variables, location of sampling stations and determination of sampling frequencies. In this study, an entropy-based approach is presented for design of an on-line water quality monitoring network for the Karoon River, which is the largest and the most important river in Iran. In the proposed algorithm of design, the number and location of sampling sites and sampling frequencies are determined by minimizing the redundant information, which is quantified using the entropy theory. A water quality simulation model is also used to generate the time series of the concentration of water quality variables at some potential sites along the river. As several water quality variables are usually considered in the design of water quality monitoring networks, the pair-wise comparison is used to combine the spatial and temporal frequencies calculated for each water quality variable. After selecting the sampling frequencies, different components of a comprehensive monitoring system such as data acquisition, transmission and processing are designed for the study area, and technical characteristics of the on-line and off-line monitoring equipment are presented. Finally, the assessment for the human resources needs, as well as training and quality assurance programs are presented considering the existing resources in the study area. The results show that the proposed approach can be effectively used for the optimal design of the river monitoring systems.     

Characterization of ionic composition of TSP and PM10 during the Middle Eastern Dust (MED) storms in Ahvaz, Iran

Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ～10?μm or less (PM(10)) during dust storms in Ahvaz in April-September 2010. TSP and PM(10) samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM(10) were 1,481.5 and 1,072.9?μg/m(3), respectively. Particle concentrations during the Middle Eastern Dust (MED) days were up to four times higher than those in normal days. Ionic components contributed to only 9.5% and 11.3% of the total mass of TSP and PM(10), respectively. Crustal ions were most abundant during dust days, while secondary ions were dominant during non-dust days. Ca(2+)/Na(+) and Cl(-)/Na(+) ratios can be considered as the indicators for identification of the MED occurrence. It was found that possible chemical forms of NaCl, (NH(4))(2)SO(4), KCl, K(2)SO(4), CaCl(2), Ca(NO(3))(2), and CaSO(4) may exist in TSP. Correlation between the anionic and cationic components suggests slight anion and cation deficiencies in TSP and PM(10) samples, though the deficiencies were negligible.     

Effect of fertilizer application on soil heavy metal concentration

A large amount of chemicals is annually applied at the agricultural soils as fertilizers and pesticides. Such applications may result in the increase of heavy metals particularly Cd, Pb, and As. The objective of this study was to investigate the variability of chemical applications on Cd, Pb, and As concentrations of wheat-cultivated soils. Consequently, a study area was designed and was divided into four subareas (A, B, C, and D). The soil sampling was carried out in 40 points of cultivated durum wheat during the 2006–2007 periods. The samples were taken to the laboratory to measure their heavy metal concentration, soil texture, pH, electrical conductivity, cationic exchange capacity, organic matter, and carbonate contents. The result indicated that Cd, Pb, and As concentrations were increased in the cultivated soils due to fertilizer application. Although the statistical analysis indicates that these heavy metals increased significantly (P value < 0.05), the lead and arsenic concentrations were increased dramatically compared to Cd concentration. This can be related to overapplication of fertilizers as well as the pesticides that are used to replant plant pests, herbs, and rats.     

A study on Aspergillus species in houses of asthmatic patients from Sari City, Iran and a brief review of the health effects of exposure to indoor Aspergillus

To study the distribution of Aspergillus spp. in outdoor and indoor air of asthmatic patients’ houses, as well as a review on the health effects of exposure to indoor Aspergillus. Open plates containing malt extract agar media were used to isolate fungi from the indoor (n?=?360) and outdoor (n?=?180) air of 90 asthmatic patients’ houses living in Sari City, Iran. Plates were incubated at room temperature for 7–14 days. Cultured Aspergillus spp. were identified by standard mycological techniques. All culture plates grew fungi, a testament to the ubiquitous nature of fungal exposure. Cladosporium spp. (29.2%), Aspergillus spp. (19.0%), and Penicillium spp. (18.3%) were most common inside the houses while Cladosporium spp. (44.5%), Aspergillus spp. (12.4%), and Alternaria spp. (11.1%) were most common outside the houses. Aspergillus flavus (30.1%) and A. fumigatus (23.1%) are the most commonly isolated species in indoor air. Aspergillus flavus (44.5%) and A. fumigatus (42.6%) were the most prevalent Aspergillus spp. outside. The most colony numbers of Aspergillus were isolated from kitchens (30.4%) and the least from bedrooms (21.1%). Aspergillus flavus was the most prevalent specie in all sampled rooms except in the kitchen where A. fumigatus was the most common. Aspergillus flavus is the most prevalent species among the Aspergillus spp. in the indoor and outdoor of a warm climate area. In these areas, A. flavus can be a major source of allergen in the air. Therefore, minimizing indoor fungal exposure could play an important role in reducing allergic symptoms in susceptible persons.     

Health risk assessment of heavy metal intake due to fish consumption in the Sistan region,Iran

The heavy metal (Pb, Cd, Cr, and Ni) content of a fish species consumed by the Sistan population and its associated health risk factors were investigated. The mean concentrations of Pb, Cd, and Cr were slightly higher than the standard levels. The Ni content of fish was below the maximum guideline proposed by the US Food and Drug Administration (USFDA). The average estimated weekly intake was significantly below the provisional tolerable intake based on the FAO and WHO standards for all studied metals. The target hazard quotients (THQ) of all metals were below 1, showing an absence of health hazard for the population of Sistan. The combined target hazard quotient for the considered metals was 26.94 × 10^?3. The cancer risk factor for Pb (1.57 × 10^?7) was below the acceptable lifetime carcinogenic risk (10^?5). The results of this study reveal an almost safe level of Pb, Cd, Cr, and Ni contents in the fish consumed by the Sistan population.

Open image in new window

Graphical abstract ?

     

Discharge permit market and farm management nexus: an approach for eutrophication control in small basins with low-income farmers

The economic concerns of low-income farmers are barriers to nutrient abatement policies for eutrophication control in surface waters. This study brings up a perspective that focuses on integrating multiple-pollutant discharge permit markets with farm management practices. This aims to identify a more economically motivated waste load allocation (WLA) for non-point sources (NPS). For this purpose, we chose the small basin of Zrebar Lake in western Iran and used the soil and water assessment tool (SWAT) for modeling. The export coefficients (ECs), effectiveness of best management practices (BMPs), and crop yields were calculated by using this software. These variables show that low-income farmers can hardly afford to invest in BMPs in a typical WLA. Conversely, a discharge permit market presents a more cost-effective solution. This method saves 64% in total abatement costs and motivates farmers by offering economic benefits. A market analysis revealed that nitrogen permits mostly cover the trades with the optimal price ranging from $6 to $30 per kilogram. However, phosphorous permits are limited for trading, and their price exceeds $60 per kilogram. This approach also emphasizes the establishment of a regional institution for market monitoring, dynamic pricing, fair fund reallocation, giving information to participants, and ensuring their income. By these sets of strategies, a WLA on the brink of failure can turn into a cost-effective and sustainable policy for eutrophication control in small basins.     

Assessment of water quality of Manchar Lake in Sindh (Pakistan)

Manchar Lake is the largest natural freshwater lake in Pakistan. The Lake has received less fresh water in past few years. In addition, drainage water is being discharged in the Lake through Main Nara Valley Drain (MNVD) since many years. Consequently, concern has grown regarding the water quality of the Lake. The aim of this study was to assess the water quality of Manchar Lake and MNVD and the objectives were to determine physiochemical properties and the concentrations of common cations and anions as well as seven trace metals i.e. Cu, Ni, Zn, Co, Fe, Pb and Cd. The concentration of the trace metals were determined by simultaneous preconcentration and solvent extraction using flame atomic absorption spectrometer. Results of physicochemical parameters of Manchar Lake water samples showed mean pH 8.4 (±0.2), conductivity 2,310.3 (±581.3) μS cm⁻¹ and hardness (as CaCO₃) 213.1 (±62.3) mg l⁻¹. Mean concentrations of cations and anions were Na 521.5 (±49.7), Cl⁻ 413.6 (±225.7), Ca 70.7 (±12.9), Mg 56.2 (±28.9), K 17.6 (±6.5), 0.34 (±0.2) and 0.02 (±0.01) mg l⁻¹. Mean concentrations of trace metals were Zn 15.7 (±1), Fe 12 (±3.5), Pb 9 (±2.7), Cu 8.9 (±7.7), Ni 4.3 (±3.4), Co 4 (±3.4) and Cd 1.1 (±1) μg l⁻¹. MNVD water samples showed mean pH 8.9 (±0.8), conductivity 1,735.7 (±567.8) μS cm⁻¹ and hardness (as CaCO₃) 184.8 (±32.4) mg l⁻¹. In MNWD, the mean concentrations of cations and anions were Na 482.7 (±11.7), Cl⁻ 395.7 (±271.5), Ca 79.1 (±23.5), Mg 54.2 (±28.1), K 26.2 (±21.3), NO⁻³ 0.5 (±0.3) and 0.1 (±0.1) mg l⁻¹. Mean concentrations of trace metals observed in MNWD water were Fe 14.9(±3.5), Cd 8.3 (±9.4), Pb 6.9 (±2.4), Cu 6.6 (±3.1), Zn 6.2 (±1.8), Co 4.5 (±2.7), and Ni 3.5 (±2.9) μg l⁻¹. The pH of both Manchar Lake and MNVD waters and concentration of Pb in Manchar Lake and concentration of Cd in MNVD water were higher than the World Health Organisation’s guideline values for the drinking water quality. The water quality of Manchar Lake was found degraded.     

Analysis of cost–benefit in life-cycle of plastic solid waste: combining waste flow analysis and life cycle cost as a decision support tool to the selection of optimum scenario

Millions of tons of plastic are consumed annually in the world due to its significant characteristics such as durability, flexibility, and low weight. High consumption has made plastic one of the most important municipal solid waste compounds, the quantity of which has increased in recent decades. Plastic solid wastes are known as a threat to the environment, and its efficient management in various aspects such as cost–benefit requires decision-making tools. This study was assessing the cost–benefit of plastic solid waste management by development of an economic model, and definition of different scenarios to change plastic solid waste management status. The results showed that 8971 tons of plastic solid waste were generated annually in the studied city. The plastic solid wastes were finally transferred to either recycling or landfilling site through 5 identified routes. 83 percent of the total recycled plastic solid waste was due to post-separation routes, and only 7.7 percent of the total plastic solid waste was recycled from the source separation route. The economic comparison of scenarios showed that with the aggregation of post-separation routes, the net revenue of plastic solid waste management increases by 334,000 euro per year while increasing the public participation and the ratio of source separation route raises net revenue by 875,000 euro per year, which was the best economic condition among the scenarios. Using life cycle cost method and it’s respected developed economic model truly satisfied the conditions of both, the current plastic solid waste management and the alternative scenarios, and hence can be adopted as a tool for decision-making.

     

Mass transfer and bioremediation of aromatics from NAPL in a baffled roller bioreactor

A non-aqueous phase liquid (NAPL) containing dissolved naphthalene or phenol was used to simulate water insoluble contaminants which are produced during the processing of oil sands. Mass transfer and biodegradation of organic contaminants in the aqueous phase were studied in a baffled roller bioreactor. Mass transfer of both naphthalene and phenol from NAPL into the aqueous phase was completed in less than 60 min, by which time naphthalene reached its saturation concentration in the aqueous phase and phenol was completely transferred into the aqueous phase. Pseudomonas putida (ATCC 17484) was subsequently used in biodegradation experiments in the baffled bioreactor containing the model NAPL contaminant. The optimum loading of NAPL for biodegradation of naphthalene at 500 mg/L was found to be 40%. High biodegradation rates (136.4 mg/L h for naphthalene and 13.2 mg/L h for phenol based on the working volume of the bioreactor) were achieved. In the case of simultaneous biodegradation of naphthalene and phenol, the highest total biodegradation rate of 102.6 mg/L h was achieved.